config: Remove hold_current from sample configs and sample macros

Now that the documentation recommends that hold_current not be set,
update the example config files to not specify a hold_current.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

1 files changed, 0 insertions, 12 deletions

diff --git a/config/generic-fysetc-s6-v2.cfg b/config/generic-fysetc-s6-v2.cfg
index cdc9190d..21c24b0f 100644
--- a/config/generic-fysetc-s6-v2.cfg
+++ b/config/generic-fysetc-s6-v2.cfg
@@ -106,37 +106,31 @@ max_z_accel: 100
 #[tmc2208 stepper_x]
 #uart_pin: PE8
 #run_current: 0.8
-#hold_current: 0.5
 #stealthchop_threshold: 999999
 
 #[tmc2208 stepper_y]
 #uart_pin: PC4
 #run_current: 0.8
-#hold_current: 0.5
 #stealthchop_threshold: 999999
 
 #[tmc2208 stepper_z]
 #uart_pin: PD12
 #run_current: 0.8
-#hold_current: 0.5
 #stealthchop_threshold: 999999
 
 #[tmc2208 extruder]
 #uart_pin: PA15
 #run_current: 0.8
-#hold_current: 0.5
 #stealthchop_threshold: 999999
 
 #[tmc2208 extruder1]
 #uart_pin: PC5
 #run_current: 0.8
-#hold_current: 0.5
 #stealthchop_threshold: 999999
 
 #[tmc2208 extruder2]
 #uart_pin: PE0
 #run_current: 0.8
-#hold_current: 0.5
 #stealthchop_threshold: 999999
 
 
@@ -149,7 +143,6 @@ max_z_accel: 100
 #cs_pin: PE7
 #diag1_pin: PB14
 #run_current: 0.800
-#hold_current: 0.500
 #stealthchop_threshold: 999999
 
 #[tmc2130 stepper_y]
@@ -157,7 +150,6 @@ max_z_accel: 100
 #cs_pin: PE15
 #diag1_pin: PB13
 #run_current: 0.800
-#hold_current: 0.500
 #stealthchop_threshold: 999999
 
 #[tmc2130 stepper_z]
@@ -165,7 +157,6 @@ max_z_accel: 100
 #cs_pin: PD10
 #diag1_pin: PA0
 #run_current: 0.800
-#hold_current: 0.500
 #stealthchop_threshold: 999999
 
 #[tmc2130 extruder]
@@ -173,7 +164,6 @@ max_z_accel: 100
 #cs_pin: PD7
 #diag1_pin: PA3
 #run_current: 0.800
-#hold_current: 0.500
 #stealthchop_threshold: 999999
 
 #[tmc2130 extruder1]
@@ -181,7 +171,6 @@ max_z_accel: 100
 #cs_pin: PC14
 #diag1_pin: PA2
 #run_current: 0.800
-#hold_current: 0.500
 #stealthchop_threshold: 999999
 
 #[tmc2130 extruder2]
@@ -189,7 +178,6 @@ max_z_accel: 100
 #cs_pin: PC15
 #diag1_pin: PA1
 #run_current: 0.800
-#hold_current: 0.500
 #stealthchop_threshold: 999999