diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2019-11-07 16:24:52 -0500 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2019-11-07 16:28:47 -0500 |
| commit | ed610a6600dd982623ad79409f430a522910b202 (patch) | |
| tree | 29207210d1100428a8ca1aea803eb15c23514132 /config/generic-duet2-duex.cfg | |
| parent | 29b5961d9f6b3a24e73ed4d52233f463f8670619 (diff) | |
| download | kutter-ed610a6600dd982623ad79409f430a522910b202.tar.gz kutter-ed610a6600dd982623ad79409f430a522910b202.tar.xz kutter-ed610a6600dd982623ad79409f430a522910b202.zip | |
extruder: Consistently use "extruder" for the primary extruder
No longer allow the primary extruder to be named "extruder0". This
avoids internal and external confusion between the printer objects and
config section names.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'config/generic-duet2-duex.cfg')
| -rw-r--r-- | config/generic-duet2-duex.cfg | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/config/generic-duet2-duex.cfg b/config/generic-duet2-duex.cfg index 7a23d943..dfdce853 100644 --- a/config/generic-duet2-duex.cfg +++ b/config/generic-duet2-duex.cfg @@ -182,10 +182,10 @@ run_current: 1.000 sense_resistor: 0.051 #On drive E0 -[extruder0] +[extruder] step_pin: PD5 dir_pin: PA1 -enable_pin: !PC6, tmc2660_extruder0:virtual_enable +enable_pin: !PC6, tmc2660_extruder:virtual_enable step_distance: .002 nozzle_diameter: 0.400 filament_diameter: 1.750 @@ -199,7 +199,7 @@ pid_Kd: 114 min_temp: 0 max_temp: 250 -[tmc2660 extruder0] +[tmc2660 extruder] cs_pin: PC17 spi_bus: usart1 microsteps: 16 @@ -297,10 +297,10 @@ max_temp: 130 [fan] pin: PC23 -# Fan1 controlled by extruder0 +# Fan1 controlled by extruder [heater_fan nozzle_cooling_fan] pin: PC26 -heater: extruder0 +heater: extruder heater_temp: 45 fan_speed: 1.0 |