config: Remove hold_current from sample configs and sample macros

Now that the documentation recommends that hold_current not be set,
update the example config files to not specify a hold_current.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

1 files changed, 0 insertions, 10 deletions

diff --git a/config/generic-bigtreetech-skr-v1.3.cfg b/config/generic-bigtreetech-skr-v1.3.cfg
index ab1df53b..209deeb1 100644
--- a/config/generic-bigtreetech-skr-v1.3.cfg
+++ b/config/generic-bigtreetech-skr-v1.3.cfg
@@ -95,31 +95,26 @@ max_z_accel: 100
 #[tmc2208 stepper_x]
 #uart_pin: P1.17
 #run_current: 0.800
-#hold_current: 0.500
 #stealthchop_threshold: 999999
 
 #[tmc2208 stepper_y]
 #uart_pin: P1.15
 #run_current: 0.800
-#hold_current: 0.500
 #stealthchop_threshold: 999999
 
 #[tmc2208 stepper_z]
 #uart_pin: P1.10
 #run_current: 0.650
-#hold_current: 0.450
 #stealthchop_threshold: 999999
 
 #[tmc2208 extruder]
 #uart_pin: P1.8
 #run_current: 0.800
-#hold_current: 0.500
 #stealthchop_threshold: 999999
 
 #[tmc2208 extruder1]
 #uart_pin: P1.1
 #run_current: 0.800
-#hold_current: 0.500
 #stealthchop_threshold: 999999
 
 
@@ -138,7 +133,6 @@ max_z_accel: 100
 #spi_software_sclk_pin: P0.4
 ##diag1_pin: P1.29
 #run_current: 0.800
-#hold_current: 0.500
 #stealthchop_threshold: 999999
 
 #[tmc2130 stepper_y]
@@ -148,7 +142,6 @@ max_z_accel: 100
 #spi_software_sclk_pin: P0.4
 ##diag1_pin: P1.27
 #run_current: 0.800
-#hold_current: 0.500
 #stealthchop_threshold: 999999
 
 #[tmc2130 stepper_z]
@@ -158,7 +151,6 @@ max_z_accel: 100
 #spi_software_sclk_pin: P0.4
 ##diag1_pin: P1.25
 #run_current: 0.650
-#hold_current: 0.450
 #stealthchop_threshold: 999999
 
 #[tmc2130 extruder]
@@ -168,7 +160,6 @@ max_z_accel: 100
 #spi_software_sclk_pin: P0.4
 ##diag1_pin: P1.28
 #run_current: 0.800
-#hold_current: 0.500
 #stealthchop_threshold: 999999
 
 #[tmc2130 extruder1]
@@ -178,7 +169,6 @@ max_z_accel: 100
 #spi_software_sclk_pin: P0.4
 ##diag1_pin: P1.26
 #run_current: 0.800
-#hold_current: 0.500
 #stealthchop_threshold: 999999