diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2019-04-06 16:18:15 -0400 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2019-04-06 16:18:15 -0400 |
| commit | 62bdc2709f1be5d8e40e014aa8a307f73d1e691d (patch) | |
| tree | 1c1ef908c374f9d5a78a0c067720ce75e001ca33 /config/generic-bigtreetech-skr-v1.3.cfg | |
| parent | 478a916f516fa05aea3b4e94cfe04fc10786c191 (diff) | |
| download | kutter-62bdc2709f1be5d8e40e014aa8a307f73d1e691d.tar.gz kutter-62bdc2709f1be5d8e40e014aa8a307f73d1e691d.tar.xz kutter-62bdc2709f1be5d8e40e014aa8a307f73d1e691d.zip | |
config: Update generic-bigtreetech-skr-v1.3.cfg with e0/e1 defs
Use the HE0 for the extruder0 heater and add comments describing the
nominal extruder1 pins.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'config/generic-bigtreetech-skr-v1.3.cfg')
| -rw-r--r-- | config/generic-bigtreetech-skr-v1.3.cfg | 10 |
1 files changed, 9 insertions, 1 deletions
diff --git a/config/generic-bigtreetech-skr-v1.3.cfg b/config/generic-bigtreetech-skr-v1.3.cfg index d0c1f44a..f286566f 100644 --- a/config/generic-bigtreetech-skr-v1.3.cfg +++ b/config/generic-bigtreetech-skr-v1.3.cfg @@ -90,7 +90,7 @@ enable_pin: !P2.12 step_distance: .010526 nozzle_diameter: 0.400 filament_diameter: 1.750 -heater_pin: P2.4 +heater_pin: P2.7 sensor_type: EPCOS 100K B57560G104F sensor_pin: P0.24 control: pid @@ -100,6 +100,14 @@ pid_Kd: 114 min_temp: 0 max_temp: 260 +#[extruder1] +#step_pin: P0.1 +#dir_pin: P0.0 +#enable_pin: !P0.10 +#heater_pin: P2.4 +#sensor_pin: P0.25 +#... + ## Heatbed configuration ## [heater_bed] |