diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2021-06-07 21:35:42 -0400 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2021-06-07 21:38:19 -0400 |
| commit | 87e12c0430cffce03004f92250a2ffe6885442bf (patch) | |
| tree | 6c5a8c63dd6ec3568a4ffa26cdc1f6552d551e5b /config/generic-bigtreetech-skr-2.cfg | |
| parent | be4fb7f128728da687bbee5a0dda3d1b12e82ef3 (diff) | |
| download | kutter-87e12c0430cffce03004f92250a2ffe6885442bf.tar.gz kutter-87e12c0430cffce03004f92250a2ffe6885442bf.tar.xz kutter-87e12c0430cffce03004f92250a2ffe6885442bf.zip | |
config: Add motor power definition to generic-bigtreetech-skr-2.cfg
Add a pin definition to enable motor power and add a warning about
initial faulty SKR2 boards.
Reported by @FHeilmann.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'config/generic-bigtreetech-skr-2.cfg')
| -rw-r--r-- | config/generic-bigtreetech-skr-2.cfg | 8 |
1 files changed, 8 insertions, 0 deletions
diff --git a/config/generic-bigtreetech-skr-2.cfg b/config/generic-bigtreetech-skr-2.cfg index 218badea..c4195106 100644 --- a/config/generic-bigtreetech-skr-2.cfg +++ b/config/generic-bigtreetech-skr-2.cfg @@ -9,6 +9,10 @@ # See docs/Config_Reference.md for a description of parameters. +# Note: The initial revision of this board has a flaw that can cause +# damage to itself and other boards. Be sure to verify the board is +# not impacted by this flaw before using it. + [stepper_x] step_pin: PE2 dir_pin: PE1 @@ -84,6 +88,10 @@ pin: PB7 #[heater_fan fan2] #pin: PB5 +[output_pin motor_power] +pin: PC13 +value: 1 + [mcu] serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00 |