config: Remove hold_current from sample configs and sample macros

Now that the documentation recommends that hold_current not be set,
update the example config files to not specify a hold_current.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

1 files changed, 0 insertions, 16 deletions

diff --git a/config/generic-bigtreetech-octopus.cfg b/config/generic-bigtreetech-octopus.cfg
index 04bef072..d8deb0da 100644
--- a/config/generic-bigtreetech-octopus.cfg
+++ b/config/generic-bigtreetech-octopus.cfg
@@ -153,52 +153,44 @@ max_z_accel: 100
 #uart_pin: PC4
 ##diag_pin: PG6
 #run_current: 0.800
-#hold_current: 0.500
 #stealthchop_threshold: 999999
 
 #[tmc2209 stepper_y]
 #uart_pin: PD11
 ##diag_pin: PG9
 #run_current: 0.800
-#hold_current: 0.500
 #stealthchop_threshold: 999999
 
 #[tmc2209 stepper_z]
 #uart_pin: PC6
 ##diag_pin: PG10
 #run_current: 0.650
-#hold_current: 0.450
 #stealthchop_threshold: 999999
 
 #[tmc2209 stepper_]
 #uart_pin: PC7
 ##diag_pin: PG11
 #run_current: 0.650
-#hold_current: 0.450
 #stealthchop_threshold: 999999
 
 #[tmc2209 extruder]
 #uart_pin: PF2
 #run_current: 0.800
-#hold_current: 0.500
 #stealthchop_threshold: 999999
 
 #[tmc2209 extruder1]
 #uart_pin: PE4
 #run_current: 0.800
-#hold_current: 0.500
 #stealthchop_threshold: 999999
 
 #[tmc2209 extruder2]
 #uart_pin: PE1
 #run_current: 0.800
-#hold_current: 0.500
 #stealthchop_threshold: 999999
 
 #[tmc2209 extruder3]
 #uart_pin: PD3
 #run_current: 0.800
-#hold_current: 0.500
 #stealthchop_threshold: 999999
 
 ########################################
@@ -210,7 +202,6 @@ max_z_accel: 100
 #spi_bus: spi1
 ##diag1_pin: PG6
 #run_current: 0.800
-#hold_current: 0.500
 #stealthchop_threshold: 999999
 
 #[tmc2130 stepper_y]
@@ -218,7 +209,6 @@ max_z_accel: 100
 #spi_bus: spi1
 ##diag1_pin: PG9
 #run_current: 0.800
-#hold_current: 0.500
 #stealthchop_threshold: 999999
 
 #[tmc2130 stepper_z]
@@ -226,7 +216,6 @@ max_z_accel: 100
 #spi_bus: spi1
 ##diag1_pin: PG10
 #run_current: 0.650
-#hold_current: 0.450
 #stealthchop_threshold: 999999
 
 #[tmc2130 stepper_]
@@ -234,35 +223,30 @@ max_z_accel: 100
 #spi_bus: spi1
 ##diag1_pin: PG11
 #run_current: 0.800
-#hold_current: 0.500
 #stealthchop_threshold: 999999
 
 #[tmc2130 extruder]
 #cs_pin: PF2
 #spi_bus: spi1
 #run_current: 0.800
-#hold_current: 0.500
 #stealthchop_threshold: 999999
 
 #[tmc2130 extruder1]
 #cs_pin: PE4
 #spi_bus: spi1
 #run_current: 0.800
-#hold_current: 0.500
 #stealthchop_threshold: 999999
 
 #[tmc2130 extruder2]
 #cs_pin: PE1
 #spi_bus: spi1
 #run_current: 0.800
-#hold_current: 0.500
 #stealthchop_threshold: 999999
 
 #[tmc2130 extruder3]
 #cs_pin: PD3
 #spi_bus: spi1
 #run_current: 0.800
-#hold_current: 0.500
 #stealthchop_threshold: 999999
 
 [board_pins]