config: Add BigTreeTech EBB V1.2 / EBB SB V1.0 / E3EZ / M5P / M8P V1.1 / Octopus Max EZ

Signed-off-by: Alan.Ma from BigTreeTech tech@biqu3d.com
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

1 files changed, 332 insertions, 0 deletions

diff --git a/config/generic-bigtreetech-octopus-max-ez.cfg b/config/generic-bigtreetech-octopus-max-ez.cfg
new file mode 100644
index 00000000..f1f153e8
--- /dev/null
+++ b/config/generic-bigtreetech-octopus-max-ez.cfg
@@ -0,0 +1,332 @@
+# This file contains common pin mappings for the BIGTREETECH Octopus Max EZ.
+# To use this config, the firmware should be compiled for the
+# STM32H723 with a "128KiB bootloader" "25 MHz crystal"
+# and "USB (on PA11/PA12)" or "CAN bus (on PD0/PD1)".
+
+# See docs/Config_Reference.md for a description of parameters.
+
+# Motor-1
+[stepper_x]
+step_pin: PC13
+dir_pin: PC14
+enable_pin: !PE6
+microsteps: 16
+rotation_distance: 40
+endstop_pin: PF0
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+# Motor-2
+[stepper_y]
+step_pin: PE4
+dir_pin: PE5
+enable_pin: !PE3
+microsteps: 16
+rotation_distance: 40
+endstop_pin: PF2
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+# Motor-3
+[stepper_z]
+step_pin: PE1
+dir_pin: PE0
+enable_pin: !PE2
+microsteps: 16
+rotation_distance: 8
+endstop_pin: PF4
+position_endstop: 0.5
+position_max: 200
+
+# Motor-4
+# The Octopus only has 4 heater outputs which leaves an extra stepper
+# This can be used for a second Z stepper, dual_carriage, extruder co-stepper,
+# or other accesory such as an MMU
+#[stepper_]
+#step_pin: PB8
+#dir_pin: PB9
+#enable_pin: PB7
+#endstop_pin: PF3
+#...
+
+# Motor-5
+[extruder]
+step_pin: PB5
+dir_pin: PB4
+enable_pin: !PB6
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PF6 # HE0
+sensor_pin:  PB0 # T0
+sensor_type: EPCOS 100K B57560G104F
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+#[filament_switch_sensor material_0]
+#switch_pin: PF1
+
+# Motor-6
+#[extruder1]
+#step_pin: PG15
+#dir_pin: PB3
+#enable_pin: !PD5
+#heater_pin: PA0 # HE1
+#sensor_pin: PC5 # T1
+#...
+
+#[filament_switch_sensor material_1]
+#switch_pin: PC15
+
+# Motor-7
+#[extruder2]
+#step_pin: PD3
+#dir_pin: PD2
+#enable_pin: !PD4
+#heater_pin: PF9 # HE2
+#sensor_pin: PC4 # T2
+#...
+
+# Motor-8
+#[extruder3]
+#step_pin: PA10
+#dir_pin: PA9
+#enable_pin: !PA15
+#heater_pin: PF7 # HE3
+#sensor_pin: PA7 # T3
+#...
+
+# Motor-9
+#[extruder4]
+#step_pin: PA8
+#dir_pin: PC7
+#enable_pin: !PC9
+#...
+
+# Motor-10
+#[extruder5]
+#step_pin: PG6
+#dir_pin: PC6
+#enable_pin: !PC8
+#...
+
+[heater_bed]
+heater_pin: PF5
+sensor_pin: PB1 # TB
+sensor_type: ATC Semitec 104GT-2
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PA6
+
+#[heater_fan fan1]
+#pin: PA5
+
+#[heater_fan fan2]
+#pin: PA4
+
+#[heater_fan fan3]
+#pin: PA3
+
+#[heater_fan fan4]
+#pin: PA1
+#tachometer_pin: PC3
+
+#[heater_fan fan5]
+#pin: PF8
+#tachometer_pin: PC1
+
+#[heater_fan fan6]
+#pin: PA2
+#tachometer_pin: PC2
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+########################################
+# TMC2209 configuration
+########################################
+
+#[tmc2209 stepper_x]
+#uart_pin: PG14
+##diag_pin: PF0
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 stepper_y]
+#uart_pin: PG13
+##diag_pin: PF2
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 stepper_z]
+#uart_pin: PG12
+##diag_pin: PF4
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+#[tmc2209 stepper_]
+#uart_pin: PG11
+##diag_pin: PF3
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder]
+#uart_pin: PG10
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder1]
+#uart_pin: PG9
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder2]
+#uart_pin: PD7
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder3]
+#uart_pin: PD6
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder4]
+#uart_pin: PG8
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder5]
+#uart_pin: PG7
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+########################################
+# TMC2130 configuration
+########################################
+
+#[tmc2130 stepper_x]
+#cs_pin: PG14
+#spi_bus: spi4
+##diag1_pin: PF0
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_y]
+#cs_pin: PG13
+#spi_bus: spi4
+##diag1_pin: PF2
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_z]
+#cs_pin: PG12
+#spi_bus: spi4
+##diag1_pin: PF4
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_]
+#cs_pin: PG11
+#spi_bus: spi4
+##diag1_pin: PF3
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder]
+#cs_pin: PG10
+#spi_bus: spi4
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder1]
+#cs_pin: PG9
+#spi_bus: spi4
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder2]
+#cs_pin: PD7
+#spi_bus: spi4
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder3]
+#cs_pin: PD6
+#spi_bus: spi4
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder4]
+#cs_pin: PG8
+#spi_bus: spi4
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder5]
+#cs_pin: PG7
+#spi_bus: spi4
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+[board_pins]
+aliases:
+    # FPC header, Aliases EXP1 & EXP2 for mini12864
+    EXP1_1=PG2, EXP1_2=PD15,
+    EXP1_3=PD14, EXP1_4=PD13,
+    EXP1_5=PD12, EXP1_6=PD11,
+    EXP1_7=PD10, EXP1_8=PE15,
+    EXP1_9=<GND>, EXP1_10=<5V>,
+
+    # EXP2 header
+    EXP2_1=PE13, EXP2_2=PE12,
+    EXP2_3=PG5, EXP2_4=PE11,
+    EXP2_5=PG4, EXP2_6=PE14,
+    EXP2_7=PG3, EXP2_8=<RST>,
+    EXP2_9=<GND>, EXP2_10=<NC>
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.
+
+#[bltouch]
+#sensor_pin: PB14
+#control_pin: PB15
+
+# Proximity switch
+#[probe]
+#pin: PF11
+
+#[output_pin ps_on_pin]
+#pin: PF13
+
+#[output_pin pf12_pin]
+#pin: PF12
+
+#[neopixel my_neopixel_1]
+#pin: PE10
+
+#[neopixel my_neopixel_2]
+#pin: PE9
+
+#[hall_filament_width_sensor]
+#adc1: PC0
+#adc2: PF10
+
+#[adxl345]
+#cs_pin: PF14
+#spi_bus: spi4