config: Add BigTreeTech EBB V1.2 / EBB SB V1.0 / E3EZ / M5P / M8P V1.1 / Octopus Max EZ

Signed-off-by: Alan.Ma from BigTreeTech tech@biqu3d.com
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

1 files changed, 200 insertions, 0 deletions

diff --git a/config/generic-bigtreetech-manta-e3ez.cfg b/config/generic-bigtreetech-manta-e3ez.cfg
new file mode 100644
index 00000000..199eae70
--- /dev/null
+++ b/config/generic-bigtreetech-manta-e3ez.cfg
@@ -0,0 +1,200 @@
+# This file contains common pin mappings for the BIGTREETECH Manta E3EZ
+# To use this config, the firmware should be compiled for the
+# STM32G0B1 with a "8KiB bootloader" "8 MHz crystal"
+# and "USB (on PA11/PA12)" or "CAN bus (on PB12/PB13)".
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PA14
+dir_pin: !PA10
+enable_pin: !PA13
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PC4
+position_endstop: 0
+position_max: 235
+homing_speed: 50
+
+[stepper_y]
+step_pin: PC8
+dir_pin: !PA15
+enable_pin: !PC14
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PB0
+position_endstop: 0
+position_max: 235
+homing_speed: 50
+
+[stepper_z]
+step_pin: PD2
+dir_pin: PD4
+enable_pin: !PD3
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PC6
+position_endstop: 0
+position_max: 270
+
+[extruder]
+step_pin: PD5
+dir_pin: !PD6
+enable_pin: !PB3
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PB11 #HE0
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PA4 #TH0
+control: pid
+pid_Kp: 21.527
+pid_Ki: 1.063
+pid_Kd: 108.982
+min_temp: 0
+max_temp: 250
+
+#[filament_switch_sensor material_0]
+#switch_pin: PC5
+
+#[extruder1]
+#step_pin: PB7
+#dir_pin: PB6
+#enable_pin: !PB4
+#heater_pin: PB10 # HE1
+#sensor_pin: PA5 # T1
+
+#[filament_switch_sensor material_1]
+#switch_pin: PB1
+
+[heater_bed]
+heater_pin: PB2 #HB
+sensor_type: EPCOS 100K B57560G104F #Generic 3950
+sensor_pin: PA3 #TB
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PA8
+
+#[heater_fan fan1]
+#pin: PB15
+
+#[heater_fan fan2]
+#pin: PB14
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+########################################
+# TMC2209 configuration
+########################################
+
+#[tmc2209 stepper_x]
+#uart_pin: PB8
+##diag_pin: PC4
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 stepper_y]
+#uart_pin: PC9
+##diag_pin: PB0
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 stepper_z]
+#uart_pin: PD0
+##diag_pin: PC6
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder]
+#uart_pin: PD1
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder1]
+#uart_pin: PB5
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+########################################
+# TMC2130 configuration
+########################################
+
+#[tmc2130 stepper_x]
+#cs_pin: PB8
+#spi_software_miso_pin: PC11
+#spi_software_mosi_pin: PC12
+#spi_software_sclk_pin: PC10
+##diag1_pin: PF3
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_y]
+#cs_pin: PC9
+#spi_software_miso_pin: PC11
+#spi_software_mosi_pin: PC12
+#spi_software_sclk_pin: PC10
+##diag1_pin: PF4
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_z]
+#cs_pin: PD0
+#spi_software_miso_pin: PC11
+#spi_software_mosi_pin: PC12
+#spi_software_sclk_pin: PC10
+##diag1_pin: PF5
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder]
+#cs_pin: PD1
+#spi_software_miso_pin: PC11
+#spi_software_mosi_pin: PC12
+#spi_software_sclk_pin: PC10
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder1]
+#cs_pin: PB5
+#spi_software_miso_pin: PC11
+#spi_software_mosi_pin: PC12
+#spi_software_sclk_pin: PC10
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=PC1, EXP1_3=PC3, EXP1_5=PC0, EXP1_7=PA2, EXP1_9=<GND>,
+    EXP1_2=PC2,  EXP1_4=<RST>, EXP1_6=PA0, EXP1_8=PA1, EXP1_10=<5V>
+
+#[bltouch]
+#sensor_pin: PA6
+#control_pin: PA7
+
+#[output_pin PS_ON]
+#pin: PA9
+
+#[output_pin pb9_pin]
+#pin: PB9
+
+#[neopixel my_neopixel]
+#pin: PC7
+
+#[adxl345]
+#cs_pin: PC15
+#spi_software_miso_pin: PC11
+#spi_software_mosi_pin: PC12
+#spi_software_sclk_pin: PC10