diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2021-02-12 17:48:10 -0500 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2021-02-12 17:48:49 -0500 |
| commit | 319c36df52eb016667d13ab006cae3752d0212e7 (patch) | |
| tree | 605b14bf782427a5f8a87041713965e7d478ffe7 /config/generic-bigtreetech-gtr.cfg | |
| parent | fc783f9b8350aa0eda3b8de8e5697c1b3ea449e4 (diff) | |
| download | kutter-319c36df52eb016667d13ab006cae3752d0212e7.tar.gz kutter-319c36df52eb016667d13ab006cae3752d0212e7.tar.xz kutter-319c36df52eb016667d13ab006cae3752d0212e7.zip | |
config: Update generic-bigtreetech-gtr.cfg
Add generic-bigtreetech-gtr.cfg to printers.test. Add definitions for
thermocouple and temperature_mcu.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'config/generic-bigtreetech-gtr.cfg')
| -rw-r--r-- | config/generic-bigtreetech-gtr.cfg | 9 |
1 files changed, 8 insertions, 1 deletions
diff --git a/config/generic-bigtreetech-gtr.cfg b/config/generic-bigtreetech-gtr.cfg index 6046960c..94db471a 100644 --- a/config/generic-bigtreetech-gtr.cfg +++ b/config/generic-bigtreetech-gtr.cfg @@ -94,8 +94,15 @@ pin: PE6 # FAN1 #[heater_fan fan2] #pin: PC8 # FAN2 +[temperature_sensor mcu_temp] +sensor_type: temperature_mcu + +[temperature_sensor k_therm] +sensor_type: MAX31855 +sensor_pin: PH9 +spi_bus: spi2b + [mcu] -baud: 250000 restart_method: command serial: dev/serial0 # setup for PA9, PA10 USART1_tx / rx directly connected to the RPI GPIO TX / RX pins |