diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2017-07-04 12:24:11 -0400 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2017-07-17 11:35:52 -0400 |
| commit | 969485c754731183f357e6fef23c6180f59d4cb6 (patch) | |
| tree | f152a57906579fca334035e77d733f990912a32b /config/example.cfg | |
| parent | 519e81d0faf7be36ec94c865a1e0c97d78b6774c (diff) | |
| download | kutter-969485c754731183f357e6fef23c6180f59d4cb6.tar.gz kutter-969485c754731183f357e6fef23c6180f59d4cb6.tar.xz kutter-969485c754731183f357e6fef23c6180f59d4cb6.zip | |
fan: Add support for heater_fan objects
Add support for fans designed to cool the components of an extruder or
heater.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'config/example.cfg')
| -rw-r--r-- | config/example.cfg | 14 |
1 files changed, 14 insertions, 0 deletions
diff --git a/config/example.cfg b/config/example.cfg index 88f568e9..80bf1daa 100644 --- a/config/example.cfg +++ b/config/example.cfg @@ -322,3 +322,17 @@ max_z_accel: 30 # centripetal velocity cornering algorithm. A larger number will # permit higher "cornering speeds" at the junction of two moves. The # default is 0.02mm. + +# Heater cooling fans (one may define any number of sections with a +# "heater_fan" prefix). A "heater fan" is a fan that will be enabled +# whenever its associated heater is active. +#[heater_fan my_nozzle_fan] +# See the "fan" section for fan configuration parameters. +#pin: ar7 +# The remaining variables are specific to heater_fan. +#heater: extruder +# Name of the config section defining the heater that this fan is +# associated with. The default is "extruder". +#heater_temp: 50.0 +# A temperature (in Celsius) that the heater must drop below before +# the fan is disabled. The default is 50 Celsius. |