diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2017-09-05 21:55:44 -0400 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2017-09-05 22:12:15 -0400 |
| commit | 5b62f15c6df3bd4830ad15698901f8ac9cdf6168 (patch) | |
| tree | d12fc0d2b5f1015154dfb88b8dd36ca597563b61 /config/example.cfg | |
| parent | 09e32d1b8454b64b8571a15b95b27a8f9412a777 (diff) | |
| download | kutter-5b62f15c6df3bd4830ad15698901f8ac9cdf6168.tar.gz kutter-5b62f15c6df3bd4830ad15698901f8ac9cdf6168.tar.xz kutter-5b62f15c6df3bd4830ad15698901f8ac9cdf6168.zip | |
extruder: Provide more details on extruder errors
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'config/example.cfg')
| -rw-r--r-- | config/example.cfg | 7 |
1 files changed, 4 insertions, 3 deletions
diff --git a/config/example.cfg b/config/example.cfg index 09f6c9ad..2119b3c9 100644 --- a/config/example.cfg +++ b/config/example.cfg @@ -120,9 +120,10 @@ filament_diameter: 3.500 # extruder. This parameter must be provided. #max_extrude_cross_section: # Maximum area of the cross section of an extrusion line (in -# mm^2). If a move requests an extrusion rate that would exceed this -# value it will cause an error to be returned. The default is: 4.0 * -# nozzle_diameter^2 +# mm^2). This setting prevents excessive amounts of extrusion during +# relatively small XY moves. If a move requests an extrusion rate +# that would exceed this value it will cause an error to be +# returned. The default is: 4.0 * nozzle_diameter^2 #max_extrude_only_distance: 50.0 # Maximum length (in mm of raw filament) that an extrude only move # may be. If an extrude only move requests a distance greater than |