diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2019-04-01 00:34:01 -0400 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2019-04-04 18:30:04 -0400 |
| commit | 0615ab5f89dbc6f8442c13fb7da4e9359301469b (patch) | |
| tree | cce2abc424c7e70d971ad2fc7f10540ec858b744 /config/example-extras.cfg | |
| parent | f8bde6b1ef8bc3571e3220fd720c7464d8b44515 (diff) | |
| download | kutter-0615ab5f89dbc6f8442c13fb7da4e9359301469b.tar.gz kutter-0615ab5f89dbc6f8442c13fb7da4e9359301469b.tar.xz kutter-0615ab5f89dbc6f8442c13fb7da4e9359301469b.zip | |
docs: Note the use of bus enumerations in Config_Changes.md
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'config/example-extras.cfg')
| -rw-r--r-- | config/example-extras.cfg | 9 |
1 files changed, 5 insertions, 4 deletions
diff --git a/config/example-extras.cfg b/config/example-extras.cfg index fee9061a..a75f8b10 100644 --- a/config/example-extras.cfg +++ b/config/example-extras.cfg @@ -946,9 +946,10 @@ # I2C address used by this expander. Depending on the hardware jumpers # this is one out of the following addresses: 62 63 112 113. This # parameter must be provided. -#i2c_bus: 0 -# If the I2C implementation of your microcontroller supports multiple I2C -# busses, you may specify the bus number here. The default is 0. +#i2c_bus: +# If the I2C implementation of your microcontroller supports +# multiple I2C busses, you may specify the bus name here. The +# default is to use the default micro-controller i2c bus. # Configure a TMC2130 stepper motor driver via SPI bus. To use this @@ -1084,7 +1085,7 @@ # Select the SPI bus the TMC2660 stepper driver is connected to. # This depends on the physical connections on your board, as well as # the SPI implementation of your particular micro-controller. The -# default is bus 0. +# default is to use the default micro-controller spi bus. #spi_speed: 4000000 # SPI bus frequency used to communicate with the TMC2660 stepper # driver. The default is 4000000. |