config: Added config for Eryone Thinker Series (#4096)

Signed-off-by: Demetrius Apostolopoulos <dapostol73@hotmail.com>

2 files changed, 138 insertions, 0 deletions

diff --git a/config/printer-eryone-thinker-series-v2-2020.cfg b/config/printer-eryone-thinker-series-v2-2020.cfg
new file mode 100644
index 00000000..cd7563d4
--- /dev/null
+++ b/config/printer-eryone-thinker-series-v2-2020.cfg
@@ -0,0 +1,137 @@
+# This file contains pin mappings for the Eryone Thinker Series V2.
+# To use this config, the firmware should be compiled for the AVR atmega2560.
+
+# Author: dapostol73
+# Thanks to 3D.Subzwari and MAD3D for the help!
+
+# Extra settings to support BL Touch, Filament Runout sensor, TMC2209 and
+# have setting for fixing GCode errors, these configus can be found on
+# Eryone's Facebook Group under files.
+# Facebook like to files: https://www.facebook.com/groups/247271792709370/files
+# Config file: printer.cfg.ThinkS-BLTouch-Runout-TMC2209-dapostol73.txt
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PC0
+dir_pin: !PL1
+enable_pin: !PA7
+microsteps: 16
+rotation_distance: 40
+endstop_pin: !PB6
+position_min: -5
+position_endstop: -5
+position_max: 300
+homing_speed: 50
+
+[stepper_y]
+step_pin: PC1
+dir_pin: PL0
+enable_pin: !PA6
+microsteps: 16
+rotation_distance: 40
+endstop_pin: !PB5
+position_min: -5
+position_endstop: -5
+position_max: 300
+homing_speed: 50
+
+[stepper_z]
+step_pin: PC2
+dir_pin: PL2
+enable_pin: !PA5
+microsteps: 16
+rotation_distance: 8
+position_max: 400
+homing_speed: 25
+endstop_pin: !PB4
+position_endstop: 0
+
+[extruder]
+step_pin: PC3
+dir_pin: !PL6
+enable_pin: !PA4
+microsteps: 16
+rotation_distance: 32
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PH6
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PF0
+control: pid
+pid_kp: 22.2
+pid_ki: 1.08
+pid_kd: 144
+min_temp: 0
+max_temp: 250
+max_extrude_only_distance: 300
+
+[fan]
+pin: PH5
+
+[heater_fan nozzle_cooling_fan]
+pin: PH3
+
+[heater_bed]
+heater_pin: PE5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PF2
+control: pid
+pid_kp: 100.0
+pid_ki: 5.023
+pid_kd: 305.4
+min_temp: 0
+max_temp: 100
+
+[mcu]
+serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 1500
+max_z_velocity: 5
+max_z_accel: 150
+
+######################################################################
+# "RepRapDiscount 128x64 Full Graphic Smart Controller" type displays
+######################################################################
+
+[display]
+lcd_type: st7920
+cs_pin: EXP1_4
+sclk_pin: EXP1_5
+sid_pin: EXP1_3
+encoder_pins: ^EXP2_3, ^EXP2_5
+click_pin: ^!EXP1_2
+#kill_pin: ^!EXP2_8
+
+[output_pin beeper]
+pin: EXP1_1
+pwm: True
+value: 0
+shutdown_value: 0
+cycle_time: 0.001
+scale: 1000
+
+# Enable 16 micro-steps on steppers X, Y, Z, E0
+[static_digital_output stepper_config]
+pins:
+    PG1, PG0,
+    PK7, PG2,
+    PK6, PK5,
+    PK3, PK4
+
+[static_digital_output yellow_led]
+pins: !PB7
+
+# Common EXP1 / EXP2 (display) pins
+[board_pins]
+aliases:
+    # Common EXP1/EXP2 headers found on RAMBo v1.4
+    EXP1_1=PE6, EXP1_3=PG3, EXP1_5=PJ2, EXP1_7=PJ7, EXP1_9=<GND>,
+    EXP1_2=PE2, EXP1_4=PG4, EXP1_6=PJ3, EXP1_8=PJ4, EXP1_10=<5V>,
+    # EXP2 header
+    EXP2_1=PB3, EXP2_3=PK2, EXP2_5=PK1, EXP2_7=PD4, EXP2_9=<GND>,
+    EXP2_2=PB1, EXP2_4=PB0, EXP2_6=PB2, EXP2_8=PE7, EXP2_10=PH2
+    # Pins EXP2_1, EXP2_6, EXP2_2 are also MISO, MOSI, SCK of bus "spi"
diff --git a/test/klippy/printers.test b/test/klippy/printers.test
index ad9272e5..937832bb 100644
--- a/test/klippy/printers.test
+++ b/test/klippy/printers.test
@@ -30,6 +30,7 @@ CONFIG ../../config/printer-creality-cr10s-2017.cfg
 CONFIG ../../config/printer-creality-cr20-2018.cfg
 CONFIG ../../config/printer-creality-cr20-pro-2019.cfg
 CONFIG ../../config/printer-creality-ender5plus-2019.cfg
+CONFIG ../../config/printer-eryone-thinker-series-v2-2020.cfg
 CONFIG ../../config/printer-hiprecy-leo-2019.cfg
 CONFIG ../../config/printer-longer-lk4-pro-2019.cfg
 CONFIG ../../config/printer-lulzbot-mini1-2016.cfg