diff options
| author | Oliver Fawcett-Griffiths <olly@ollyfg.com> | 2020-08-24 00:35:01 +1200 |
|---|---|---|
| committer | GitHub <noreply@github.com> | 2020-08-23 08:35:01 -0400 |
| commit | bc304143623cda03f561aab6eeb1aa2b3b2f1edf (patch) | |
| tree | c1a009d35e95f9dabebcbff4a964d8c791df2d72 | |
| parent | 4a6360f2afe8380b92174ccb508e4065a7d0c9c7 (diff) | |
| download | kutter-bc304143623cda03f561aab6eeb1aa2b3b2f1edf.tar.gz kutter-bc304143623cda03f561aab6eeb1aa2b3b2f1edf.tar.xz kutter-bc304143623cda03f561aab6eeb1aa2b3b2f1edf.zip | |
config: Add example printer-tevo-tarantula-pro-2020.cfg config (#3225)
Signed-off-by: Oliver Fawcett-Griffiths <olly@ollyfg.com>
| -rw-r--r-- | config/printer-tevo-tarantula-pro-2020.cfg | 94 | ||||
| -rw-r--r-- | test/klippy/printers.test | 1 |
2 files changed, 95 insertions, 0 deletions
diff --git a/config/printer-tevo-tarantula-pro-2020.cfg b/config/printer-tevo-tarantula-pro-2020.cfg new file mode 100644 index 00000000..858afe7c --- /dev/null +++ b/config/printer-tevo-tarantula-pro-2020.cfg @@ -0,0 +1,94 @@ +# Support for Tevo Tarantula Pro. To use this config, the firmware should be +# compiled for the AVR atmega2560. + +# See the example.cfg file for a description of available parameters. + +[stepper_x] +step_pin: ar54 +dir_pin: !ar55 +enable_pin: !ar38 +step_distance: 0.012583 +endstop_pin: ^!ar3 +position_endstop: 0 +position_max: 220 +homing_speed: 25.0 + +[stepper_y] +step_pin: ar60 +dir_pin: ar61 +enable_pin: !ar56 +step_distance: 0.01256 +endstop_pin: ^!ar14 +position_endstop: 0 +position_max: 220 +homing_speed: 25 + +[stepper_z] +step_pin: ar46 +dir_pin: ar48 +enable_pin: !ar62 +step_distance: 0.002492 +endstop_pin: ^!ar18 +position_endstop: 0 +position_max: 200 + +[stepper_z1] +step_pin: ar36 +dir_pin: ar34 +enable_pin: !ar30 +step_distance: 0.002492 + +[extruder] +step_pin: ar26 +dir_pin: ar28 +enable_pin: !ar24 +step_distance: 0.002470 +nozzle_diameter: 0.400 +filament_diameter: 1.75 + +heater_pin: ar10 +sensor_type: EPCOS 100K B57560G104F +sensor_pin: analog13 +control: pid +pid_Kp: 22.5 +pid_Ki: 1.78 +pid_Kd: 74.16 +min_temp: 0 +max_temp: 220 + +[heater_bed] +heater_pin: ar8 +sensor_type: EPCOS 100K B57560G104F +sensor_pin: analog14 +control: watermark +min_temp: 0 +max_temp: 110 + +[fan] +pin: ar9 + +[mcu] +serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0 +pin_map: arduino + +[printer] +kinematics: cartesian +max_velocity: 400 +max_accel: 3000 +#max_accel_to_decel: +max_z_velocity: 50 +max_z_accel: 100 +#square_corner_velocity: 5.0 + +[heater_fan nozzle_fan] +pin: ar7 + + +[display] +lcd_type: uc1701 +cs_pin: ar25 +a0_pin: ar27 +encoder_pins: ^!ar31, ^!ar33 +click_pin: ^!ar35 +kill_pin: !ar41 +menu_reverse_navigation: true diff --git a/test/klippy/printers.test b/test/klippy/printers.test index a04ac3c6..52dc122f 100644 --- a/test/klippy/printers.test +++ b/test/klippy/printers.test @@ -40,6 +40,7 @@ CONFIG ../../config/printer-mtw-create-2015.cfg CONFIG ../../config/printer-seemecnc-rostock-max-v2-2015.cfg CONFIG ../../config/printer-sovol-sv01-2020.cfg CONFIG ../../config/printer-tevo-flash-2018.cfg +CONFIG ../../config/printer-tevo-tarantula-pro-2020.cfg CONFIG ../../config/printer-velleman-k8200-2013.cfg CONFIG ../../config/printer-wanhao-duplicator-i3-mini-2017.cfg CONFIG ../../config/printer-wanhao-duplicator-i3-plus-2017.cfg |