diff options
| author | Oliver Fawcett-Griffiths <olly@ollyfg.com> | 2020-08-25 10:23:50 +1200 |
|---|---|---|
| committer | GitHub <noreply@github.com> | 2020-08-24 18:23:50 -0400 |
| commit | af43faa3f2062f9eeffba28456474da235d17b6f (patch) | |
| tree | 7eb9fcf6bd1f0bdc58e4c0cec208a75a21fac7fe | |
| parent | 6763210558c84eeb4a58dc89dfcfee3f7fe80620 (diff) | |
| download | kutter-af43faa3f2062f9eeffba28456474da235d17b6f.tar.gz kutter-af43faa3f2062f9eeffba28456474da235d17b6f.tar.xz kutter-af43faa3f2062f9eeffba28456474da235d17b6f.zip | |
config: Tarantula Pro - Multiple tweaks and description change (#3230)
The following parameters have been tweaked:
- X endstop position has been set to -2, as per original marlin cofig
- Second Z axis disabled by default (this must be purchased as an
add-on)
The comment at the top of this file has also been modified to describe
the difference between this (old) model and the new (rebranded) Tevo
Tarantula pro.
Signed-off-by: Oliver Fawcett-Griffiths <olly@ollyfg.com>
| -rw-r--r-- | config/printer-tevo-tarantula-pro-2020.cfg | 27 |
1 files changed, 15 insertions, 12 deletions
diff --git a/config/printer-tevo-tarantula-pro-2020.cfg b/config/printer-tevo-tarantula-pro-2020.cfg index 858afe7c..5c074be5 100644 --- a/config/printer-tevo-tarantula-pro-2020.cfg +++ b/config/printer-tevo-tarantula-pro-2020.cfg @@ -1,5 +1,9 @@ -# Support for Tevo Tarantula Pro. To use this config, the firmware should be -# compiled for the AVR atmega2560. +# Support for the green Tevo Tarantula Pro. To use this config, the firmware +# should be compiled for the AVR atmega2560. +# Note that this config file is for the "old green" Tarantula pro, with a +# MKS Gen_l 8-bit board. +# It _will not_ work out of the box for the "new orange" Tarantula pro with a +# MKS Sgen_l 32-bit board. # See the example.cfg file for a description of available parameters. @@ -9,8 +13,9 @@ dir_pin: !ar55 enable_pin: !ar38 step_distance: 0.012583 endstop_pin: ^!ar3 -position_endstop: 0 +position_endstop: -2 position_max: 220 +position_min: -2 homing_speed: 25.0 [stepper_y] @@ -21,7 +26,7 @@ step_distance: 0.01256 endstop_pin: ^!ar14 position_endstop: 0 position_max: 220 -homing_speed: 25 +homing_speed: 25.0 [stepper_z] step_pin: ar46 @@ -32,11 +37,12 @@ endstop_pin: ^!ar18 position_endstop: 0 position_max: 200 -[stepper_z1] -step_pin: ar36 -dir_pin: ar34 -enable_pin: !ar30 -step_distance: 0.002492 +# Enable for dual-z addon +#[stepper_z1] +#step_pin: ar36 +#dir_pin: ar34 +#enable_pin: !ar30 +#step_distance: 0.002492 [extruder] step_pin: ar26 @@ -75,15 +81,12 @@ pin_map: arduino kinematics: cartesian max_velocity: 400 max_accel: 3000 -#max_accel_to_decel: max_z_velocity: 50 max_z_accel: 100 -#square_corner_velocity: 5.0 [heater_fan nozzle_fan] pin: ar7 - [display] lcd_type: uc1701 cs_pin: ar25 |