diff options
| author | Arksine <arksine.code@gmail.com> | 2019-01-21 17:24:17 -0500 |
|---|---|---|
| committer | KevinOConnor <kevin@koconnor.net> | 2019-01-28 11:23:52 -0500 |
| commit | 893cbbab83ebd4906eab0ce9bb08d0fb4f805af7 (patch) | |
| tree | 2fa510ce54d08e1dfecff338099db14f9a327e68 | |
| parent | 7605752dc253e8ff178c376073b40647837db76c (diff) | |
| download | kutter-893cbbab83ebd4906eab0ce9bb08d0fb4f805af7.tar.gz kutter-893cbbab83ebd4906eab0ce9bb08d0fb4f805af7.tar.xz kutter-893cbbab83ebd4906eab0ce9bb08d0fb4f805af7.zip | |
pause_resume: update documentation
Add updates to example-extras.cfg and G-Codes.md documenting pause_resume. Also add M600 (filament change) to sample-macros.cfg.
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
| -rw-r--r-- | config/example-extras.cfg | 6 | ||||
| -rw-r--r-- | config/sample-macros.cfg | 21 | ||||
| -rw-r--r-- | docs/G-Codes.md | 10 |
3 files changed, 37 insertions, 0 deletions
diff --git a/config/example-extras.cfg b/config/example-extras.cfg index a4e52dde..2a2e8ccf 100644 --- a/config/example-extras.cfg +++ b/config/example-extras.cfg @@ -1142,3 +1142,9 @@ # default_prefix: echo: # Directly sets the default prefix. If present, this value will override # the "default_type". + +# Pause/Resume functionality with support of position capture and restore +#[pause_resume] +#recover_velocity: 50. +# When capture/restore is enabled, the speed at which to return to +# the captured position (in mm/s). Default is 50.0 mm/s. diff --git a/config/sample-macros.cfg b/config/sample-macros.cfg index 10854b58..1f6d84a1 100644 --- a/config/sample-macros.cfg +++ b/config/sample-macros.cfg @@ -34,3 +34,24 @@ #gcode: SET_PIN PIN=BEEPER_pin VALUE={S} # G4 P{P} # SET_PIN PIN=BEEPER_pin VALUE=0 + +# M600: Filament Change. This macro will pause the printer, move +# the tool to the change position, and retract the filament 50mm. +# Adjust the retraction settings for your own extruder. After filament +# has been changed, the print can be resumed from its previous position +# with the "RESUME" gcode +# +#[gcode_macro M600] +#default_parameter_X: 50 +#default_parameter_Y: 0 +#default_parameter_Z: 10 +#gcode: +# PAUSE +# G91 +# G1 E-.8 F2700 +# G1 Z{Z} +# G90 +# G1 X{X} Y{Y} F3000 +# G91 +# G1 E-50 F1000 +# G90 diff --git a/docs/G-Codes.md b/docs/G-Codes.md index d7fcbedb..6848279f 100644 --- a/docs/G-Codes.md +++ b/docs/G-Codes.md @@ -291,3 +291,13 @@ enabled. - `RESPOND TYPE=error MSG="<message>"`: echo the message prepended with `!! `. - `RESPOND PREFIX=<prefix> MSG="<message>"`: echo the message prepended with `<prefix>` (The `PREFIX` parameter will take priority over the `TYPE` parameter) + +## Pause Resume + +The following commands are available when the "pause_resume" config section +is enabled: + - `PAUSE`: Pauses the current print. The current position is captured for + restoration upon resume. + - `RESUME [VELOCITY=<value>]`: Resumes the print from a pause, first restoring + the previously captured position. The VELOCITY parameter determines the speed + at which the tool should return to the original captured position. |