diff options
| author | Thijs Triemstra <info@collab.nl> | 2023-12-04 03:10:59 +0100 |
|---|---|---|
| committer | GitHub <noreply@github.com> | 2023-12-03 21:10:59 -0500 |
| commit | 795ce490a05b2ebae724cff634317f38bc38d721 (patch) | |
| tree | 38092299d1d9a2e096dfc4ee2fbd4306f3964355 | |
| parent | 38221df83ada0a1a9731b18b0226a02726b1c236 (diff) | |
| download | kutter-795ce490a05b2ebae724cff634317f38bc38d721.tar.gz kutter-795ce490a05b2ebae724cff634317f38bc38d721.tar.xz kutter-795ce490a05b2ebae724cff634317f38bc38d721.zip | |
doc: updates to Installation.md (#6398)
omit rpi device version nrs
rpi2 or newer
Signed-off-by: Thijs Triemstra <info@collab.nl>
| -rw-r--r-- | docs/Installation.md | 16 |
1 files changed, 8 insertions, 8 deletions
diff --git a/docs/Installation.md b/docs/Installation.md index 5e97436f..004d963a 100644 --- a/docs/Installation.md +++ b/docs/Installation.md @@ -2,7 +2,7 @@ These instructions assume the software will run on a Raspberry Pi computer in conjunction with OctoPrint. It is recommended that a -Raspberry Pi 2, 3, or 4 computer be used as the host machine (see the +Raspberry Pi 2 (or later) be used as the host machine (see the [FAQ](FAQ.md#can-i-run-klipper-on-something-other-than-a-raspberry-pi-3) for other machines). @@ -50,7 +50,7 @@ using a Linux or MacOS desktop, then the "ssh" software should already be installed on the desktop. There are free ssh clients available for other desktops (eg, [PuTTY](https://www.chiark.greenend.org.uk/~sgtatham/putty/)). Use the -ssh utility to connect to the Raspberry Pi (ssh pi@octopi -- password +ssh utility to connect to the Raspberry Pi (`ssh pi@octopi` -- password is "raspberry") and run the following commands: ``` @@ -135,18 +135,18 @@ web page and then configure the following items: Navigate to the Settings tab (the wrench icon at the top of the page). Under "Serial Connection" in "Additional serial ports" add -"/tmp/printer". Then click "Save". +`/tmp/printer`. Then click "Save". Enter the Settings tab again and under "Serial Connection" change the -"Serial Port" setting to "/tmp/printer". +"Serial Port" setting to `/tmp/printer`. In the Settings tab, navigate to the "Behavior" sub-tab and select the "Cancel any ongoing prints but stay connected to the printer" option. Click "Save". From the main page, under the "Connection" section (at the top left of -the page) make sure the "Serial Port" is set to "/tmp/printer" and -click "Connect". (If "/tmp/printer" is not an available selection then +the page) make sure the "Serial Port" is set to `/tmp/printer` and +click "Connect". (If `/tmp/printer` is not an available selection then try reloading the page.) Once connected, navigate to the "Terminal" tab and type "status" @@ -165,8 +165,8 @@ Arguably the easiest way to set the Klipper configuration file is to use a desktop editor that supports editing files over the "scp" and/or "sftp" protocols. There are freely available tools that support this (eg, Notepad++, WinSCP, and Cyberduck). Load the printer config file -in the editor and then save it as a file named "printer.cfg" in the -home directory of the pi user (ie, /home/pi/printer.cfg). +in the editor and then save it as a file named `printer.cfg` in the +home directory of the pi user (ie, `/home/pi/printer.cfg`). Alternatively, one can also copy and edit the file directly on the Raspberry Pi via ssh. That may look something like the following (be |