config: Add example generic-radds.cfg config file

Signed-off-by: Lukas Wingerberg <lukas@wingerberg.de>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

1 files changed, 109 insertions, 0 deletions

diff --git a/config/generic-radds.cfg b/config/generic-radds.cfg
new file mode 100644
index 00000000..38843ed2
--- /dev/null
+++ b/config/generic-radds.cfg
@@ -0,0 +1,109 @@
+# This file contains common pin mappings for RADDS (v1.5) boards.  To
+# use this config, the firmware should be compiled for the Arduino
+# Due.
+
+# See the example.cfg file for a description of available parameters.
+
+# Temp sensor pins: analog0..analog4
+# Mosfet Pins: ar7 (Heatbed), ar8, ar9, ar11, ar12, ar13
+
+[stepper_x]
+step_pin: ar24
+dir_pin: ar23
+enable_pin: ar26
+step_distance: .0125
+endstop_pin: ^ar28
+#endstop_pin: ^ar34
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: ar17
+dir_pin: !ar16
+enable_pin: ar22
+step_distance: .0125
+endstop_pin: ^ar30
+#endstop_pin: ^ar36
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: ar2
+dir_pin: ar3
+enable_pin: ar15
+step_distance: .0025
+endstop_pin: ^ar32
+#endstop_pin: ^ar38
+position_endstop: 0.5
+position_max: 200
+
+[extruder]
+step_pin: analog7
+dir_pin: analog6
+enable_pin: analog8
+step_distance: .002
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: ar13
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: analog0
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+#[extruder1]
+#step_pin:           analog10
+#dir_pin:            analog9
+#enable_pin:         analog11
+
+#[extruder2]
+#step_pin:           ar51
+#dir_pin:            ar53
+#enable_pin:         ar49
+
+[heater_bed]
+heater_pin: ar7
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: analog1
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: ar9
+
+#[heater_fan nozzle_cooling_fan]
+#pin: ar8
+
+[mcu]
+serial: /dev/ttyACM0
+pin_map: arduino
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+# "RepRapDiscount 2004 Smart Controller" type displays
+#[display]
+#lcd_type: hd44780
+#rs_pin: ar42
+#e_pin: ar43
+#d4_pin: ar44
+#d5_pin: ar45
+#d6_pin: ar46
+#d7_pin: ar47
+
+# "RepRapDiscount 128x64 Full Graphic Smart Controller" type displays
+#[display]
+#lcd_type: st7920
+#cs_pin: ar42
+#sclk_pin: ar44
+#sid_pin: ar43