diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2019-01-29 11:57:08 -0500 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2019-01-31 09:43:35 -0500 |
| commit | 3b6ddb08a1dd57048813b6a55fabf508e7bdf44f (patch) | |
| tree | b9b1f5e5d8ffaf4dd0fd6123433af38b60a4378e | |
| parent | a5d3d161d318577a53e4f886bb3cf51aa66dade8 (diff) | |
| download | kutter-3b6ddb08a1dd57048813b6a55fabf508e7bdf44f.tar.gz kutter-3b6ddb08a1dd57048813b6a55fabf508e7bdf44f.tar.xz kutter-3b6ddb08a1dd57048813b6a55fabf508e7bdf44f.zip | |
bltouch: Don't error on startup if the bltouch is in an error state
Stopping the connect sequence can make it difficult to get the bltouch
out of an error state. Allow the connect to proceed, ideally if the
bltouch stays in an error state it will be detected during the first
probe attempt.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
| -rw-r--r-- | klippy/extras/bltouch.py | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/klippy/extras/bltouch.py b/klippy/extras/bltouch.py index 390ca74f..e95938e2 100644 --- a/klippy/extras/bltouch.py +++ b/klippy/extras/bltouch.py @@ -69,7 +69,7 @@ class BLTouchEndstopWrapper: try: self.raise_probe() except homing.EndstopError as e: - raise self.printer.config_error(str(e)) + logging.warning("BLTouch raise probe error: %s", str(e)) def sync_mcu_print_time(self): curtime = self.printer.get_reactor().monotonic() est_time = self.mcu_pwm.get_mcu().estimated_print_time(curtime) |