diff options
| author | Grigi <nagrigoriadis@gmail.com> | 2022-10-23 15:03:51 +0100 |
|---|---|---|
| committer | KevinOConnor <kevin@koconnor.net> | 2022-11-03 16:05:24 -0400 |
| commit | 342d3f1414f905fc85ea14a125463ff2df4e9b51 (patch) | |
| tree | 600e66e8de95cc6dd147505cc920ba1b57545d7c | |
| parent | 762e2c49c71b7e83a333c7e0181a0c43a4ec8b64 (diff) | |
| download | kutter-342d3f1414f905fc85ea14a125463ff2df4e9b51.tar.gz kutter-342d3f1414f905fc85ea14a125463ff2df4e9b51.tar.xz kutter-342d3f1414f905fc85ea14a125463ff2df4e9b51.zip | |
menu: Conditional display of common Control utils
This will hide features in the Klipper Display menu that isn't applicable
for the machine, therefore we can add extra alignment tools in the Control
menu as well.
Also conditionally displays Setup/Calibration options.
Signed-off-by: Nickolas Grigoriadis <nagrigoriadis@gmail.com>
| -rw-r--r-- | klippy/extras/display/menu.cfg | 27 |
1 files changed, 24 insertions, 3 deletions
diff --git a/klippy/extras/display/menu.cfg b/klippy/extras/display/menu.cfg index d3d99d68..b0df9fc5 100644 --- a/klippy/extras/display/menu.cfg +++ b/klippy/extras/display/menu.cfg @@ -24,6 +24,9 @@ # + Home All # + Home Z # + Home X/Y +# + Z Tilt +# + Quad Gantry Lvl +# + Bed Mesh # + Steppers off # + Fan: OFF # + Fan speed: 000% @@ -233,6 +236,24 @@ enable: {not printer.idle_timeout.state == "Printing"} name: Home X/Y gcode: G28 X Y +[menu __main __control __z_tilt] +type: command +enable: {not printer.idle_timeout.state == "Printing" and ('z_tilt' in printer)} +name: Z Tilt +gcode: Z_TILT_ADJUST + +[menu __main __control __quad_gantry_level] +type: command +enable: {not printer.idle_timeout.state == "Printing" and ('quad_gantry_level' in printer)} +name: Quad Gantry Lvl +gcode: QUAD_GANTRY_LEVEL + +[menu __main __control __bed_mesh] +type: command +enable: {not printer.idle_timeout.state == "Printing" and ('bed_mesh' in printer)} +name: Bed Mesh +gcode: BED_MESH_CALIBRATE + [menu __main __control __disable] type: command name: Steppers off @@ -683,7 +704,7 @@ name: Calibration [menu __main __setup __calib __delta_calib_auto] type: command -enable: {not printer.idle_timeout.state == "Printing"} +enable: {(not printer.idle_timeout.state == "Printing") and ('delta_calibrate' in printer)} name: Delta cal. auto gcode: G28 @@ -691,12 +712,12 @@ gcode: [menu __main __setup __calib __delta_calib_man] type: list -enable: {not printer.idle_timeout.state == "Printing"} +enable: {(not printer.idle_timeout.state == "Printing") and ('delta_calibrate' in printer)} name: Delta cal. man [menu __main __setup __calib __bedprobe] type: command -enable: {not printer.idle_timeout.state == "Printing"} +enable: {(not printer.idle_timeout.state == "Printing") and ('probe' in printer)} name: Bed probe gcode: PROBE |