diff options
| author | Garth Snyder <garth@garthsnyder.com> | 2020-03-11 10:03:48 -0700 |
|---|---|---|
| committer | GitHub <noreply@github.com> | 2020-03-11 13:03:48 -0400 |
| commit | 0ba83c5b04dd6b4e7a32ab40b7f4fb06ab85cd7e (patch) | |
| tree | 50a318caceea1fd36473a157c7c2256f53ed0878 | |
| parent | 986e9c884a28a6e67aa03ae168e199eec1e027c8 (diff) | |
| download | kutter-0ba83c5b04dd6b4e7a32ab40b7f4fb06ab85cd7e.tar.gz kutter-0ba83c5b04dd6b4e7a32ab40b7f4fb06ab85cd7e.tar.xz kutter-0ba83c5b04dd6b4e7a32ab40b7f4fb06ab85cd7e.zip | |
docs: clarify behavior of M204 with only one of P or T (#2564)
Signed-off-by: Garth Snyder <garth@garthsnyder.com>
| -rw-r--r-- | docs/G-Codes.md | 3 |
1 files changed, 2 insertions, 1 deletions
diff --git a/docs/G-Codes.md b/docs/G-Codes.md index 7a7da6cf..1f8e77c8 100644 --- a/docs/G-Codes.md +++ b/docs/G-Codes.md @@ -16,7 +16,8 @@ Klipper supports the following standard G-Code commands: - Set extrude factor override percentage: `M221 S<percent>` - Set acceleration: `M204 S<value>` OR `M204 P<value> T<value>` - Note: If S is not specified and both P and T are specified, then - the acceleration is set to the minimum of P and T. + the acceleration is set to the minimum of P and T. If only one of + P or T is specified, the command has no effect. - Get extruder temperature: `M105` - Set extruder temperature: `M104 [T<index>] [S<temperature>]` - Set extruder temperature and wait: `M109 [T<index>] S<temperature>` |