1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
|
#include <reg.h>
#include <stddef.h>
#include <string.h>
#include "asm.h"
#include "usb/usb.h"
#include "uart/uart.h"
extern unsigned char _ldata[], _sdata[], _edata[];
extern unsigned char _sbss[], _ebss[];
#define RANGE0_VAL 2 /* Very High Frequency */
#define HGO0_VAL 0 /* High Gain Mode Disabled */
#define FRDIV_VAL 4 /* Divide 16 MHz by 512 to produce 31.25 kHz FLL Reference */
#define PRDIV0_VAL 7 /* Divide 16 MHz by 8 to produce 2 MHz PLL Reference */
#define VDIV0_VAL 12 /* Multiply 2 MHz by 36 to produce 72 MHz resulting clock */
/* Option 2 Clock Configuration */
#define OUTDIV1_VAL 0 /* 72 MHz / 1 = 72 MHz Core / system clocks */
#define OUTDIV2_VAL 1 /* 72 MHz / 2 = 36 MHz Bus clock */
#define OUTDIV4_VAL 2 /* 72 MHz / 3 = 24 MHz Flash clock */
void setup(void);
void setup(void)
{
/* Disable interrupts for setup */
CLI();
/* Disable Watchdog Timer */
WDOG_UNLOCK = WDOG_UNLOCK_S1;
WDOG_UNLOCK = WDOG_UNLOCK_S2;
UNSET_BIT(WDOG_STCTRLH, STCTRLH_WDOGEN);
/* Copy data and clear bss */
for (size_t i = 0; i < (size_t)(_edata - _sdata); i++)
_sdata[i] = _ldata[i];
for (size_t i = 0; i < (size_t)(_ebss - _sbss); i++)
_sbss[i] = 0;
/* Enable port clocks */
SIM_SCGC5 |= BV(SCGC5_PORTE) | BV(SCGC5_PORTD) | BV(SCGC5_PORTC)
| BV(SCGC5_PORTB) | BV(SCGC5_PORTA);
/* Change Clock Dividers */
SIM_CLKDIV1 = OUTDIV1_VAL << CLKDIV1_OUTDIV1
| OUTDIV2_VAL << CLKDIV1_OUTDIV2
| OUTDIV4_VAL << CLKDIV1_OUTDIV4;
/* Clear latched peripherals and I/O */
if (IS_BIT_SET(PMC_REGSC, REGSC_ACKISO))
SET_BIT(PMC_REGSC, REGSC_ACKISO);
/*
* CLOCKING SETUP
*/
/* FEI to FBE */
SET_MASKED(MCG_C2, C2_RANGE0_M | BV(C2_HGO0) | BV(C2_EREFS0),
RANGE0_VAL << C2_RANGE0 | BV(C2_EREFS0));
SET_MASKED(MCG_C1, C1_CLKS_M | C1_FRDIV_M | BV(C1_IREFS),
2 << C1_CLKS | FRDIV_VAL << C1_FRDIV);
WAIT_BIT_SET(MCG_S, S_OSCINIT0);
WAIT_BIT_UNSET(MCG_S, S_IREFST);
do { } while (GET_BITS(MCG_S, S_CLKST) != 2);
/* Enable Clock Monitor */
SET_BIT(MCG_C6, C6_CME0);
/* FBE to PBE */
SET_MASKED(MCG_C5, C5_PRDIV0_M, PRDIV0_VAL << C5_PRDIV0);
SET_MASKED(MCG_C6, BV(C6_PLLS) | C6_VDIV0_M, BV(C6_PLLS) | VDIV0_VAL << C6_VDIV0);
WAIT_BIT_SET(MCG_S, S_PLLST);
WAIT_BIT_SET(MCG_S, S_LOCK0);
/* PBE to PEE */
SET_MASKED(MCG_C1, C1_CLKS_M, 0);
do { } while (GET_BITS(MCG_S, S_CLKST) != 3);
/* Set PLL as the clock to use for things which can take PLL or FLL */
SET_BIT(SIM_SOPT2, SOPT2_PLLFLLSEL);
SET_MASKED(SIM_SOPT2, SOPT2_CLKOUTSEL_M, 4 << SOPT2_CLKOUTSEL);
/* configure LED pin */
PORTC_PCR(5) = 1 << PCR_MUX | BV(PCR_DSE);
GPIOC_PDDR = BV(5);
uart_setup();
usb_setup();
/* Enable interrupts for setup */
STI();
}
|
