From bd6c25c9f8c28831d146f9077a0a2aa636c6e037 Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Mon, 25 Nov 2019 14:00:30 -0500 Subject: stm32: Allow external crystal speed to be customized in Kconfig Signed-off-by: Kevin O'Connor --- src/stm32/stm32f0.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'src/stm32/stm32f0.c') diff --git a/src/stm32/stm32f0.c b/src/stm32/stm32f0.c index 11951920..6f9d994f 100644 --- a/src/stm32/stm32f0.c +++ b/src/stm32/stm32f0.c @@ -4,7 +4,7 @@ // // This file may be distributed under the terms of the GNU GPLv3 license. -#include "autoconf.h" // CONFIG_CLOCK_REF_8M +#include "autoconf.h" // CONFIG_CLOCK_REF_FREQ #include "board/armcm_boot.h" // armcm_main #include "board/irq.h" // irq_disable #include "command.h" // DECL_CONSTANT_STR @@ -99,7 +99,7 @@ usb_request_bootloader(void) NVIC_SystemReset(); } -#if CONFIG_CLOCK_REF_8M +#if !CONFIG_STM32_CLOCK_REF_INTERNAL DECL_CONSTANT_STR("RESERVE_PINS_crystal", "PF0,PF1"); #endif @@ -108,13 +108,15 @@ static void pll_setup(void) { uint32_t cfgr; - if (CONFIG_CLOCK_REF_8M) { - // Configure 48Mhz PLL from external 8Mhz crystal (HSE) + if (!CONFIG_STM32_CLOCK_REF_INTERNAL) { + // Configure 48Mhz PLL from external crystal (HSE) + uint32_t div = CONFIG_CLOCK_FREQ / CONFIG_CLOCK_REF_FREQ; RCC->CR |= RCC_CR_HSEON; - cfgr = RCC_CFGR_PLLSRC_HSE_PREDIV | ((6 - 2) << RCC_CFGR_PLLMUL_Pos); + cfgr = RCC_CFGR_PLLSRC_HSE_PREDIV | ((div - 2) << RCC_CFGR_PLLMUL_Pos); } else { // Configure 48Mhz PLL from internal 8Mhz oscillator (HSI) - cfgr = RCC_CFGR_PLLSRC_HSI_DIV2 | ((12 - 2) << RCC_CFGR_PLLMUL_Pos); + uint32_t div2 = (CONFIG_CLOCK_FREQ / 8000000) * 2; + cfgr = RCC_CFGR_PLLSRC_HSI_DIV2 | ((div2 - 2) << RCC_CFGR_PLLMUL_Pos); } RCC->CFGR = cfgr; RCC->CR |= RCC_CR_PLLON; -- cgit v1.2.3-70-g09d2