From 664c869f7749da96bbea7307beb043dfe52593c5 Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Sun, 28 Jul 2019 23:23:18 -0400 Subject: lib: Remove unused stm32f1 "hal" code Now that the stm32f1 code has been merged into the stm32 code, there is no longer a need to use the upstream stm32f1 "hal" code. Signed-off-by: Kevin O'Connor --- lib/stm32f1/hal/source/stm32f1xx_hal_rtc_ex.c | 579 -------------------------- 1 file changed, 579 deletions(-) delete mode 100644 lib/stm32f1/hal/source/stm32f1xx_hal_rtc_ex.c (limited to 'lib/stm32f1/hal/source/stm32f1xx_hal_rtc_ex.c') diff --git a/lib/stm32f1/hal/source/stm32f1xx_hal_rtc_ex.c b/lib/stm32f1/hal/source/stm32f1xx_hal_rtc_ex.c deleted file mode 100644 index 93029d4c..00000000 --- a/lib/stm32f1/hal/source/stm32f1xx_hal_rtc_ex.c +++ /dev/null @@ -1,579 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_rtc_ex.c - * @author MCD Application Team - * @brief Extended RTC HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Real Time Clock (RTC) Extension peripheral: - * + RTC Tamper functions - * + Extension Control functions - * + Extension RTC features functions - * - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - -#ifdef HAL_RTC_MODULE_ENABLED - -/** @defgroup RTCEx RTCEx - * @brief RTC Extended HAL module driver - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/** @defgroup RTCEx_Private_Macros RTCEx Private Macros - * @{ - */ -/** - * @} - */ - -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions - * @{ - */ - -/** @defgroup RTCEx_Exported_Functions_Group1 RTC Tamper functions - * @brief RTC Tamper functions - * -@verbatim - =============================================================================== - ##### RTC Tamper functions ##### - =============================================================================== - - [..] This section provides functions allowing to configure Tamper feature - -@endverbatim - * @{ - */ - -/** - * @brief Sets Tamper - * @note By calling this API we disable the tamper interrupt for all tampers. - * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @param sTamper: Pointer to Tamper Structure. - * @note Tamper can be enabled only if ASOE and CCO bit are reset - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper) -{ - /* Check input parameters */ - if ((hrtc == NULL) || (sTamper == NULL)) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_RTC_TAMPER(sTamper->Tamper)); - assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger)); - - /* Process Locked */ - __HAL_LOCK(hrtc); - - hrtc->State = HAL_RTC_STATE_BUSY; - - if (HAL_IS_BIT_SET(BKP->RTCCR, (BKP_RTCCR_CCO | BKP_RTCCR_ASOE))) - { - hrtc->State = HAL_RTC_STATE_ERROR; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_ERROR; - } - - MODIFY_REG(BKP->CR, (BKP_CR_TPE | BKP_CR_TPAL), (sTamper->Tamper | (sTamper->Trigger))); - - hrtc->State = HAL_RTC_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_OK; -} - -/** - * @brief Sets Tamper with interrupt. - * @note By calling this API we force the tamper interrupt for all tampers. - * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @param sTamper: Pointer to RTC Tamper. - * @note Tamper can be enabled only if ASOE and CCO bit are reset - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper) -{ - /* Check input parameters */ - if ((hrtc == NULL) || (sTamper == NULL)) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_RTC_TAMPER(sTamper->Tamper)); - assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger)); - - /* Process Locked */ - __HAL_LOCK(hrtc); - - hrtc->State = HAL_RTC_STATE_BUSY; - - if (HAL_IS_BIT_SET(BKP->RTCCR, (BKP_RTCCR_CCO | BKP_RTCCR_ASOE))) - { - hrtc->State = HAL_RTC_STATE_ERROR; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_ERROR; - } - - MODIFY_REG(BKP->CR, (BKP_CR_TPE | BKP_CR_TPAL), (sTamper->Tamper | (sTamper->Trigger))); - - /* Configure the Tamper Interrupt in the BKP->CSR */ - __HAL_RTC_TAMPER_ENABLE_IT(hrtc, RTC_IT_TAMP1); - - hrtc->State = HAL_RTC_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_OK; -} - -/** - * @brief Deactivates Tamper. - * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @param Tamper: Selected tamper pin. - * This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper) -{ - /* Check input parameters */ - if (hrtc == NULL) - { - return HAL_ERROR; - } - /* Prevent unused argument(s) compilation warning */ - UNUSED(Tamper); - - assert_param(IS_RTC_TAMPER(Tamper)); - - /* Process Locked */ - __HAL_LOCK(hrtc); - - hrtc->State = HAL_RTC_STATE_BUSY; - - /* Disable the selected Tamper pin */ - CLEAR_BIT(BKP->CR, BKP_CR_TPE); - - /* Disable the Tamper Interrupt in the BKP->CSR */ - /* Configure the Tamper Interrupt in the BKP->CSR */ - __HAL_RTC_TAMPER_DISABLE_IT(hrtc, RTC_IT_TAMP1); - - /* Clear the Tamper interrupt pending bit */ - __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP1F); - SET_BIT(BKP->CSR, BKP_CSR_CTE); - - hrtc->State = HAL_RTC_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_OK; -} - -/** - * @brief This function handles Tamper interrupt request. - * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @retval None - */ -void HAL_RTCEx_TamperIRQHandler(RTC_HandleTypeDef *hrtc) -{ - /* Get the status of the Interrupt */ - if (__HAL_RTC_TAMPER_GET_IT_SOURCE(hrtc, RTC_IT_TAMP1)) - { - /* Get the TAMPER Interrupt enable bit and pending bit */ - if (__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP1F) != (uint32_t)RESET) - { - /* Tamper callback */ -#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) - hrtc->Tamper1EventCallback(hrtc); -#else - HAL_RTCEx_Tamper1EventCallback(hrtc); -#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ - - /* Clear the Tamper interrupt pending bit */ - __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP1F); - } - } - - /* Change RTC state */ - hrtc->State = HAL_RTC_STATE_READY; -} - -/** - * @brief Tamper 1 callback. - * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @retval None - */ -__weak void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hrtc); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_RTCEx_Tamper1EventCallback could be implemented in the user file - */ -} - -/** - * @brief This function handles Tamper1 Polling. - * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @param Timeout: Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout) -{ - uint32_t tickstart = HAL_GetTick(); - - /* Check input parameters */ - if (hrtc == NULL) - { - return HAL_ERROR; - } - - /* Get the status of the Interrupt */ - while (__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP1F) == RESET) - { - if (Timeout != HAL_MAX_DELAY) - { - if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout)) - { - hrtc->State = HAL_RTC_STATE_TIMEOUT; - return HAL_TIMEOUT; - } - } - } - - /* Clear the Tamper Flag */ - __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP1F); - - /* Change RTC state */ - hrtc->State = HAL_RTC_STATE_READY; - - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup RTCEx_Exported_Functions_Group2 RTC Second functions - * @brief RTC Second functions - * -@verbatim - =============================================================================== - ##### RTC Second functions ##### - =============================================================================== - - [..] This section provides functions implementing second interupt handlers - -@endverbatim - * @{ - */ - -/** - * @brief Sets Interrupt for second - * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTCEx_SetSecond_IT(RTC_HandleTypeDef *hrtc) -{ - /* Check input parameters */ - if (hrtc == NULL) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hrtc); - - hrtc->State = HAL_RTC_STATE_BUSY; - - /* Enable Second interuption */ - __HAL_RTC_SECOND_ENABLE_IT(hrtc, RTC_IT_SEC); - - hrtc->State = HAL_RTC_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_OK; -} - -/** - * @brief Deactivates Second. - * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTCEx_DeactivateSecond(RTC_HandleTypeDef *hrtc) -{ - /* Check input parameters */ - if (hrtc == NULL) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(hrtc); - - hrtc->State = HAL_RTC_STATE_BUSY; - - /* Deactivate Second interuption*/ - __HAL_RTC_SECOND_DISABLE_IT(hrtc, RTC_IT_SEC); - - hrtc->State = HAL_RTC_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_OK; -} - -/** - * @brief This function handles second interrupt request. - * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @retval None - */ -void HAL_RTCEx_RTCIRQHandler(RTC_HandleTypeDef *hrtc) -{ - if (__HAL_RTC_SECOND_GET_IT_SOURCE(hrtc, RTC_IT_SEC)) - { - /* Get the status of the Interrupt */ - if (__HAL_RTC_SECOND_GET_FLAG(hrtc, RTC_FLAG_SEC)) - { - /* Check if Overrun occurred */ - if (__HAL_RTC_SECOND_GET_FLAG(hrtc, RTC_FLAG_OW)) - { - /* Second error callback */ - HAL_RTCEx_RTCEventErrorCallback(hrtc); - - /* Clear flag Second */ - __HAL_RTC_OVERFLOW_CLEAR_FLAG(hrtc, RTC_FLAG_OW); - - /* Change RTC state */ - hrtc->State = HAL_RTC_STATE_ERROR; - } - else - { - /* Second callback */ - HAL_RTCEx_RTCEventCallback(hrtc); - - /* Change RTC state */ - hrtc->State = HAL_RTC_STATE_READY; - } - - /* Clear flag Second */ - __HAL_RTC_SECOND_CLEAR_FLAG(hrtc, RTC_FLAG_SEC); - } - } -} - -/** - * @brief Second event callback. - * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @retval None - */ -__weak void HAL_RTCEx_RTCEventCallback(RTC_HandleTypeDef *hrtc) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hrtc); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_RTCEx_RTCEventCallback could be implemented in the user file - */ -} - -/** - * @brief Second event error callback. - * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @retval None - */ -__weak void HAL_RTCEx_RTCEventErrorCallback(RTC_HandleTypeDef *hrtc) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hrtc); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_RTCEx_RTCEventErrorCallback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup RTCEx_Exported_Functions_Group3 Extended Peripheral Control functions - * @brief Extended Peripheral Control functions - * -@verbatim - =============================================================================== - ##### Extension Peripheral Control functions ##### - =============================================================================== - [..] - This subsection provides functions allowing to - (+) Writes a data in a specified RTC Backup data register - (+) Read a data in a specified RTC Backup data register - (+) Sets the Smooth calibration parameters. - -@endverbatim - * @{ - */ - -/** - * @brief Writes a data in a specified RTC Backup data register. - * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @param BackupRegister: RTC Backup data Register number. - * This parameter can be: RTC_BKP_DRx where x can be from 1 to 10 (or 42) to - * specify the register (depending devices). - * @param Data: Data to be written in the specified RTC Backup data register. - * @retval None - */ -void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data) -{ - uint32_t tmp = 0U; - - /* Prevent unused argument(s) compilation warning */ - UNUSED(hrtc); - - /* Check the parameters */ - assert_param(IS_RTC_BKP(BackupRegister)); - - tmp = (uint32_t)BKP_BASE; - tmp += (BackupRegister * 4U); - - *(__IO uint32_t *) tmp = (Data & BKP_DR1_D); -} - -/** - * @brief Reads data from the specified RTC Backup data Register. - * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains - * the configuration information for RTC. - * @param BackupRegister: RTC Backup data Register number. - * This parameter can be: RTC_BKP_DRx where x can be from 1 to 10 (or 42) to - * specify the register (depending devices). - * @retval Read value - */ -uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister) -{ - uint32_t backupregister = 0U; - uint32_t pvalue = 0U; - - /* Prevent unused argument(s) compilation warning */ - UNUSED(hrtc); - - /* Check the parameters */ - assert_param(IS_RTC_BKP(BackupRegister)); - - backupregister = (uint32_t)BKP_BASE; - backupregister += (BackupRegister * 4U); - - pvalue = (*(__IO uint32_t *)(backupregister)) & BKP_DR1_D; - - /* Read the specified register */ - return pvalue; -} - - -/** - * @brief Sets the Smooth calibration parameters. - * @param hrtc: RTC handle - * @param SmoothCalibPeriod: Not used (only present for compatibility with another families) - * @param SmoothCalibPlusPulses: Not used (only present for compatibility with another families) - * @param SmouthCalibMinusPulsesValue: specifies the RTC Clock Calibration value. - * This parameter must be a number between 0 and 0x7F. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue) -{ - /* Check input parameters */ - if (hrtc == NULL) - { - return HAL_ERROR; - } - /* Prevent unused argument(s) compilation warning */ - UNUSED(SmoothCalibPeriod); - UNUSED(SmoothCalibPlusPulses); - - /* Check the parameters */ - assert_param(IS_RTC_SMOOTH_CALIB_MINUS(SmouthCalibMinusPulsesValue)); - - /* Process Locked */ - __HAL_LOCK(hrtc); - - hrtc->State = HAL_RTC_STATE_BUSY; - - /* Sets RTC Clock Calibration value.*/ - MODIFY_REG(BKP->RTCCR, BKP_RTCCR_CAL, SmouthCalibMinusPulsesValue); - - /* Change RTC state */ - hrtc->State = HAL_RTC_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hrtc); - - return HAL_OK; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_RTC_MODULE_ENABLED */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - -- cgit v1.2.3-70-g09d2