From 664c869f7749da96bbea7307beb043dfe52593c5 Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Sun, 28 Jul 2019 23:23:18 -0400 Subject: lib: Remove unused stm32f1 "hal" code Now that the stm32f1 code has been merged into the stm32 code, there is no longer a need to use the upstream stm32f1 "hal" code. Signed-off-by: Kevin O'Connor --- lib/stm32f1/hal/source/stm32f1xx_hal_crc.c | 330 ----------------------------- 1 file changed, 330 deletions(-) delete mode 100644 lib/stm32f1/hal/source/stm32f1xx_hal_crc.c (limited to 'lib/stm32f1/hal/source/stm32f1xx_hal_crc.c') diff --git a/lib/stm32f1/hal/source/stm32f1xx_hal_crc.c b/lib/stm32f1/hal/source/stm32f1xx_hal_crc.c deleted file mode 100644 index cbf1d5c3..00000000 --- a/lib/stm32f1/hal/source/stm32f1xx_hal_crc.c +++ /dev/null @@ -1,330 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_crc.c - * @author MCD Application Team - * @brief CRC HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Cyclic Redundancy Check (CRC) peripheral: - * + Initialization and de-initialization functions - * + Peripheral Control functions - * + Peripheral State functions - * - @verbatim - =============================================================================== - ##### How to use this driver ##### - =============================================================================== - [..] - (+) Enable CRC AHB clock using __HAL_RCC_CRC_CLK_ENABLE(); - (+) Initialize CRC calculator - (++) specify generating polynomial (peripheral default or non-default one) - (++) specify initialization value (peripheral default or non-default one) - (++) specify input data format - (++) specify input or output data inversion mode if any - (+) Use HAL_CRC_Accumulate() function to compute the CRC value of the - input data buffer starting with the previously computed CRC as - initialization value - (+) Use HAL_CRC_Calculate() function to compute the CRC value of the - input data buffer starting with the defined initialization value - (default or non-default) to initiate CRC calculation - - @endverbatim - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - -/** @defgroup CRC CRC - * @brief CRC HAL module driver. - * @{ - */ - -#ifdef HAL_CRC_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ - -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup CRC_Exported_Functions CRC Exported Functions - * @{ - */ - -/** @defgroup CRC_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions. - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Initialize the CRC according to the specified parameters - in the CRC_InitTypeDef and create the associated handle - (+) DeInitialize the CRC peripheral - (+) Initialize the CRC MSP (MCU Specific Package) - (+) DeInitialize the CRC MSP - -@endverbatim - * @{ - */ - -/** - * @brief Initialize the CRC according to the specified - * parameters in the CRC_InitTypeDef and create the associated handle. - * @param hcrc CRC handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc) -{ - /* Check the CRC handle allocation */ - if (hcrc == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance)); - - if (hcrc->State == HAL_CRC_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hcrc->Lock = HAL_UNLOCKED; - /* Init the low level hardware */ - HAL_CRC_MspInit(hcrc); - } - - /* Change CRC peripheral state */ - hcrc->State = HAL_CRC_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief DeInitialize the CRC peripheral. - * @param hcrc CRC handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_CRC_DeInit(CRC_HandleTypeDef *hcrc) -{ - /* Check the CRC handle allocation */ - if (hcrc == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance)); - - /* Check the CRC peripheral state */ - if (hcrc->State == HAL_CRC_STATE_BUSY) - { - return HAL_BUSY; - } - - /* Change CRC peripheral state */ - hcrc->State = HAL_CRC_STATE_BUSY; - - /* Reset CRC calculation unit */ - __HAL_CRC_DR_RESET(hcrc); - - /* Reset IDR register content */ - CLEAR_BIT(hcrc->Instance->IDR, CRC_IDR_IDR); - - /* DeInit the low level hardware */ - HAL_CRC_MspDeInit(hcrc); - - /* Change CRC peripheral state */ - hcrc->State = HAL_CRC_STATE_RESET; - - /* Process unlocked */ - __HAL_UNLOCK(hcrc); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Initializes the CRC MSP. - * @param hcrc CRC handle - * @retval None - */ -__weak void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hcrc); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_CRC_MspInit can be implemented in the user file - */ -} - -/** - * @brief DeInitialize the CRC MSP. - * @param hcrc CRC handle - * @retval None - */ -__weak void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hcrc); - - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_CRC_MspDeInit can be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup CRC_Exported_Functions_Group2 Peripheral Control functions - * @brief management functions. - * -@verbatim - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) compute the 32-bit CRC value of a 32-bit data buffer - using combination of the previous CRC value and the new one. - - [..] or - - (+) compute the 32-bit CRC value of a 32-bit data buffer - independently of the previous CRC value. - -@endverbatim - * @{ - */ - -/** - * @brief Compute the 32-bit CRC value of a 32-bit data buffer - * starting with the previously computed CRC as initialization value. - * @param hcrc CRC handle - * @param pBuffer pointer to the input data buffer. - * @param BufferLength input data buffer length (number of uint32_t words). - * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits) - */ -uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength) -{ - uint32_t index; /* CRC input data buffer index */ - uint32_t temp = 0U; /* CRC output (read from hcrc->Instance->DR register) */ - - /* Change CRC peripheral state */ - hcrc->State = HAL_CRC_STATE_BUSY; - - /* Enter Data to the CRC calculator */ - for (index = 0U; index < BufferLength; index++) - { - hcrc->Instance->DR = pBuffer[index]; - } - temp = hcrc->Instance->DR; - - /* Change CRC peripheral state */ - hcrc->State = HAL_CRC_STATE_READY; - - /* Return the CRC computed value */ - return temp; -} - -/** - * @brief Compute the 32-bit CRC value of a 32-bit data buffer - * starting with hcrc->Instance->INIT as initialization value. - * @param hcrc CRC handle - * @param pBuffer pointer to the input data buffer. - * @param BufferLength input data buffer length (number of uint32_t words). - * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits) - */ -uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength) -{ - uint32_t index; /* CRC input data buffer index */ - uint32_t temp = 0U; /* CRC output (read from hcrc->Instance->DR register) */ - - /* Change CRC peripheral state */ - hcrc->State = HAL_CRC_STATE_BUSY; - - /* Reset CRC Calculation Unit (hcrc->Instance->INIT is - * written in hcrc->Instance->DR) */ - __HAL_CRC_DR_RESET(hcrc); - - /* Enter 32-bit input data to the CRC calculator */ - for (index = 0U; index < BufferLength; index++) - { - hcrc->Instance->DR = pBuffer[index]; - } - temp = hcrc->Instance->DR; - - /* Change CRC peripheral state */ - hcrc->State = HAL_CRC_STATE_READY; - - /* Return the CRC computed value */ - return temp; -} - -/** - * @} - */ - -/** @defgroup CRC_Exported_Functions_Group3 Peripheral State functions - * @brief Peripheral State functions. - * -@verbatim - =============================================================================== - ##### Peripheral State functions ##### - =============================================================================== - [..] - This subsection permits to get in run-time the status of the peripheral. - -@endverbatim - * @{ - */ - -/** - * @brief Return the CRC handle state. - * @param hcrc CRC handle - * @retval HAL state - */ -HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc) -{ - /* Return CRC handle state */ - return hcrc->State; -} - -/** - * @} - */ - -/** - * @} - */ - - -#endif /* HAL_CRC_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit v1.2.3-70-g09d2