From 664c869f7749da96bbea7307beb043dfe52593c5 Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Sun, 28 Jul 2019 23:23:18 -0400 Subject: lib: Remove unused stm32f1 "hal" code Now that the stm32f1 code has been merged into the stm32 code, there is no longer a need to use the upstream stm32f1 "hal" code. Signed-off-by: Kevin O'Connor --- lib/stm32f1/hal/include/stm32f1xx_ll_sdmmc.h | 1112 -------------------------- 1 file changed, 1112 deletions(-) delete mode 100644 lib/stm32f1/hal/include/stm32f1xx_ll_sdmmc.h (limited to 'lib/stm32f1/hal/include/stm32f1xx_ll_sdmmc.h') diff --git a/lib/stm32f1/hal/include/stm32f1xx_ll_sdmmc.h b/lib/stm32f1/hal/include/stm32f1xx_ll_sdmmc.h deleted file mode 100644 index 9c1b970a..00000000 --- a/lib/stm32f1/hal/include/stm32f1xx_ll_sdmmc.h +++ /dev/null @@ -1,1112 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_ll_sdmmc.h - * @author MCD Application Team - * @brief Header file of SDMMC HAL module. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2018 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F1xx_LL_SDMMC_H -#define STM32F1xx_LL_SDMMC_H - -#ifdef __cplusplus - extern "C" { -#endif - -#if defined(SDIO) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal_def.h" - -/** @addtogroup STM32F1xx_Driver - * @{ - */ - -/** @addtogroup SDMMC_LL - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup SDMMC_LL_Exported_Types SDMMC_LL Exported Types - * @{ - */ - -/** - * @brief SDMMC Configuration Structure definition - */ -typedef struct -{ - uint32_t ClockEdge; /*!< Specifies the clock transition on which the bit capture is made. - This parameter can be a value of @ref SDMMC_LL_Clock_Edge */ - - uint32_t ClockBypass; /*!< Specifies whether the SDMMC Clock divider bypass is - enabled or disabled. - This parameter can be a value of @ref SDMMC_LL_Clock_Bypass */ - - uint32_t ClockPowerSave; /*!< Specifies whether SDMMC Clock output is enabled or - disabled when the bus is idle. - This parameter can be a value of @ref SDMMC_LL_Clock_Power_Save */ - - uint32_t BusWide; /*!< Specifies the SDMMC bus width. - This parameter can be a value of @ref SDMMC_LL_Bus_Wide */ - - uint32_t HardwareFlowControl; /*!< Specifies whether the SDMMC hardware flow control is enabled or disabled. - This parameter can be a value of @ref SDMMC_LL_Hardware_Flow_Control */ - - uint32_t ClockDiv; /*!< Specifies the clock frequency of the SDMMC controller. - This parameter can be a value between Min_Data = 0 and Max_Data = 255 */ - -}SDIO_InitTypeDef; - - -/** - * @brief SDMMC Command Control structure - */ -typedef struct -{ - uint32_t Argument; /*!< Specifies the SDMMC command argument which is sent - to a card as part of a command message. If a command - contains an argument, it must be loaded into this register - before writing the command to the command register. */ - - uint32_t CmdIndex; /*!< Specifies the SDMMC command index. It must be Min_Data = 0 and - Max_Data = 64 */ - - uint32_t Response; /*!< Specifies the SDMMC response type. - This parameter can be a value of @ref SDMMC_LL_Response_Type */ - - uint32_t WaitForInterrupt; /*!< Specifies whether SDMMC wait for interrupt request is - enabled or disabled. - This parameter can be a value of @ref SDMMC_LL_Wait_Interrupt_State */ - - uint32_t CPSM; /*!< Specifies whether SDMMC Command path state machine (CPSM) - is enabled or disabled. - This parameter can be a value of @ref SDMMC_LL_CPSM_State */ -}SDIO_CmdInitTypeDef; - - -/** - * @brief SDMMC Data Control structure - */ -typedef struct -{ - uint32_t DataTimeOut; /*!< Specifies the data timeout period in card bus clock periods. */ - - uint32_t DataLength; /*!< Specifies the number of data bytes to be transferred. */ - - uint32_t DataBlockSize; /*!< Specifies the data block size for block transfer. - This parameter can be a value of @ref SDMMC_LL_Data_Block_Size */ - - uint32_t TransferDir; /*!< Specifies the data transfer direction, whether the transfer - is a read or write. - This parameter can be a value of @ref SDMMC_LL_Transfer_Direction */ - - uint32_t TransferMode; /*!< Specifies whether data transfer is in stream or block mode. - This parameter can be a value of @ref SDMMC_LL_Transfer_Type */ - - uint32_t DPSM; /*!< Specifies whether SDMMC Data path state machine (DPSM) - is enabled or disabled. - This parameter can be a value of @ref SDMMC_LL_DPSM_State */ -}SDIO_DataInitTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup SDMMC_LL_Exported_Constants SDMMC_LL Exported Constants - * @{ - */ -#define SDMMC_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */ -#define SDMMC_ERROR_CMD_CRC_FAIL ((uint32_t)0x00000001U) /*!< Command response received (but CRC check failed) */ -#define SDMMC_ERROR_DATA_CRC_FAIL ((uint32_t)0x00000002U) /*!< Data block sent/received (CRC check failed) */ -#define SDMMC_ERROR_CMD_RSP_TIMEOUT ((uint32_t)0x00000004U) /*!< Command response timeout */ -#define SDMMC_ERROR_DATA_TIMEOUT ((uint32_t)0x00000008U) /*!< Data timeout */ -#define SDMMC_ERROR_TX_UNDERRUN ((uint32_t)0x00000010U) /*!< Transmit FIFO underrun */ -#define SDMMC_ERROR_RX_OVERRUN ((uint32_t)0x00000020U) /*!< Receive FIFO overrun */ -#define SDMMC_ERROR_ADDR_MISALIGNED ((uint32_t)0x00000040U) /*!< Misaligned address */ -#define SDMMC_ERROR_BLOCK_LEN_ERR ((uint32_t)0x00000080U) /*!< Transferred block length is not allowed for the card or the - number of transferred bytes does not match the block length */ -#define SDMMC_ERROR_ERASE_SEQ_ERR ((uint32_t)0x00000100U) /*!< An error in the sequence of erase command occurs */ -#define SDMMC_ERROR_BAD_ERASE_PARAM ((uint32_t)0x00000200U) /*!< An invalid selection for erase groups */ -#define SDMMC_ERROR_WRITE_PROT_VIOLATION ((uint32_t)0x00000400U) /*!< Attempt to program a write protect block */ -#define SDMMC_ERROR_LOCK_UNLOCK_FAILED ((uint32_t)0x00000800U) /*!< Sequence or password error has been detected in unlock - command or if there was an attempt to access a locked card */ -#define SDMMC_ERROR_COM_CRC_FAILED ((uint32_t)0x00001000U) /*!< CRC check of the previous command failed */ -#define SDMMC_ERROR_ILLEGAL_CMD ((uint32_t)0x00002000U) /*!< Command is not legal for the card state */ -#define SDMMC_ERROR_CARD_ECC_FAILED ((uint32_t)0x00004000U) /*!< Card internal ECC was applied but failed to correct the data */ -#define SDMMC_ERROR_CC_ERR ((uint32_t)0x00008000U) /*!< Internal card controller error */ -#define SDMMC_ERROR_GENERAL_UNKNOWN_ERR ((uint32_t)0x00010000U) /*!< General or unknown error */ -#define SDMMC_ERROR_STREAM_READ_UNDERRUN ((uint32_t)0x00020000U) /*!< The card could not sustain data reading in stream rmode */ -#define SDMMC_ERROR_STREAM_WRITE_OVERRUN ((uint32_t)0x00040000U) /*!< The card could not sustain data programming in stream mode */ -#define SDMMC_ERROR_CID_CSD_OVERWRITE ((uint32_t)0x00080000U) /*!< CID/CSD overwrite error */ -#define SDMMC_ERROR_WP_ERASE_SKIP ((uint32_t)0x00100000U) /*!< Only partial address space was erased */ -#define SDMMC_ERROR_CARD_ECC_DISABLED ((uint32_t)0x00200000U) /*!< Command has been executed without using internal ECC */ -#define SDMMC_ERROR_ERASE_RESET ((uint32_t)0x00400000U) /*!< Erase sequence was cleared before executing because an out - of erase sequence command was received */ -#define SDMMC_ERROR_AKE_SEQ_ERR ((uint32_t)0x00800000U) /*!< Error in sequence of authentication */ -#define SDMMC_ERROR_INVALID_VOLTRANGE ((uint32_t)0x01000000U) /*!< Error in case of invalid voltage range */ -#define SDMMC_ERROR_ADDR_OUT_OF_RANGE ((uint32_t)0x02000000U) /*!< Error when addressed block is out of range */ -#define SDMMC_ERROR_REQUEST_NOT_APPLICABLE ((uint32_t)0x04000000U) /*!< Error when command request is not applicable */ -#define SDMMC_ERROR_INVALID_PARAMETER ((uint32_t)0x08000000U) /*!< the used parameter is not valid */ -#define SDMMC_ERROR_UNSUPPORTED_FEATURE ((uint32_t)0x10000000U) /*!< Error when feature is not insupported */ -#define SDMMC_ERROR_BUSY ((uint32_t)0x20000000U) /*!< Error when transfer process is busy */ -#define SDMMC_ERROR_DMA ((uint32_t)0x40000000U) /*!< Error while DMA transfer */ -#define SDMMC_ERROR_TIMEOUT ((uint32_t)0x80000000U) /*!< Timeout error */ - -/** - * @brief SDMMC Commands Index - */ -#define SDMMC_CMD_GO_IDLE_STATE ((uint8_t)0U) /*!< Resets the SD memory card. */ -#define SDMMC_CMD_SEND_OP_COND ((uint8_t)1U) /*!< Sends host capacity support information and activates the card's initialization process. */ -#define SDMMC_CMD_ALL_SEND_CID ((uint8_t)2U) /*!< Asks any card connected to the host to send the CID numbers on the CMD line. */ -#define SDMMC_CMD_SET_REL_ADDR ((uint8_t)3U) /*!< Asks the card to publish a new relative address (RCA). */ -#define SDMMC_CMD_SET_DSR ((uint8_t)4U) /*!< Programs the DSR of all cards. */ -#define SDMMC_CMD_SDMMC_SEN_OP_COND ((uint8_t)5U) /*!< Sends host capacity support information (HCS) and asks the accessed card to send its - operating condition register (OCR) content in the response on the CMD line. */ -#define SDMMC_CMD_HS_SWITCH ((uint8_t)6U) /*!< Checks switchable function (mode 0) and switch card function (mode 1). */ -#define SDMMC_CMD_SEL_DESEL_CARD ((uint8_t)7U) /*!< Selects the card by its own relative address and gets deselected by any other address */ -#define SDMMC_CMD_HS_SEND_EXT_CSD ((uint8_t)8U) /*!< Sends SD Memory Card interface condition, which includes host supply voltage information - and asks the card whether card supports voltage. */ -#define SDMMC_CMD_SEND_CSD ((uint8_t)9U) /*!< Addressed card sends its card specific data (CSD) on the CMD line. */ -#define SDMMC_CMD_SEND_CID ((uint8_t)10U) /*!< Addressed card sends its card identification (CID) on the CMD line. */ -#define SDMMC_CMD_READ_DAT_UNTIL_STOP ((uint8_t)11U) /*!< SD card doesn't support it. */ -#define SDMMC_CMD_STOP_TRANSMISSION ((uint8_t)12U) /*!< Forces the card to stop transmission. */ -#define SDMMC_CMD_SEND_STATUS ((uint8_t)13U) /*!< Addressed card sends its status register. */ -#define SDMMC_CMD_HS_BUSTEST_READ ((uint8_t)14U) /*!< Reserved */ -#define SDMMC_CMD_GO_INACTIVE_STATE ((uint8_t)15U) /*!< Sends an addressed card into the inactive state. */ -#define SDMMC_CMD_SET_BLOCKLEN ((uint8_t)16U) /*!< Sets the block length (in bytes for SDSC) for all following block commands - (read, write, lock). Default block length is fixed to 512 Bytes. Not effective - for SDHS and SDXC. */ -#define SDMMC_CMD_READ_SINGLE_BLOCK ((uint8_t)17U) /*!< Reads single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of - fixed 512 bytes in case of SDHC and SDXC. */ -#define SDMMC_CMD_READ_MULT_BLOCK ((uint8_t)18U) /*!< Continuously transfers data blocks from card to host until interrupted by - STOP_TRANSMISSION command. */ -#define SDMMC_CMD_HS_BUSTEST_WRITE ((uint8_t)19U) /*!< 64 bytes tuning pattern is sent for SDR50 and SDR104. */ -#define SDMMC_CMD_WRITE_DAT_UNTIL_STOP ((uint8_t)20U) /*!< Speed class control command. */ -#define SDMMC_CMD_SET_BLOCK_COUNT ((uint8_t)23U) /*!< Specify block count for CMD18 and CMD25. */ -#define SDMMC_CMD_WRITE_SINGLE_BLOCK ((uint8_t)24U) /*!< Writes single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of - fixed 512 bytes in case of SDHC and SDXC. */ -#define SDMMC_CMD_WRITE_MULT_BLOCK ((uint8_t)25U) /*!< Continuously writes blocks of data until a STOP_TRANSMISSION follows. */ -#define SDMMC_CMD_PROG_CID ((uint8_t)26U) /*!< Reserved for manufacturers. */ -#define SDMMC_CMD_PROG_CSD ((uint8_t)27U) /*!< Programming of the programmable bits of the CSD. */ -#define SDMMC_CMD_SET_WRITE_PROT ((uint8_t)28U) /*!< Sets the write protection bit of the addressed group. */ -#define SDMMC_CMD_CLR_WRITE_PROT ((uint8_t)29U) /*!< Clears the write protection bit of the addressed group. */ -#define SDMMC_CMD_SEND_WRITE_PROT ((uint8_t)30U) /*!< Asks the card to send the status of the write protection bits. */ -#define SDMMC_CMD_SD_ERASE_GRP_START ((uint8_t)32U) /*!< Sets the address of the first write block to be erased. (For SD card only). */ -#define SDMMC_CMD_SD_ERASE_GRP_END ((uint8_t)33U) /*!< Sets the address of the last write block of the continuous range to be erased. */ -#define SDMMC_CMD_ERASE_GRP_START ((uint8_t)35U) /*!< Sets the address of the first write block to be erased. Reserved for each command - system set by switch function command (CMD6). */ -#define SDMMC_CMD_ERASE_GRP_END ((uint8_t)36U) /*!< Sets the address of the last write block of the continuous range to be erased. - Reserved for each command system set by switch function command (CMD6). */ -#define SDMMC_CMD_ERASE ((uint8_t)38U) /*!< Reserved for SD security applications. */ -#define SDMMC_CMD_FAST_IO ((uint8_t)39U) /*!< SD card doesn't support it (Reserved). */ -#define SDMMC_CMD_GO_IRQ_STATE ((uint8_t)40U) /*!< SD card doesn't support it (Reserved). */ -#define SDMMC_CMD_LOCK_UNLOCK ((uint8_t)42U) /*!< Sets/resets the password or lock/unlock the card. The size of the data block is set by - the SET_BLOCK_LEN command. */ -#define SDMMC_CMD_APP_CMD ((uint8_t)55U) /*!< Indicates to the card that the next command is an application specific command rather - than a standard command. */ -#define SDMMC_CMD_GEN_CMD ((uint8_t)56U) /*!< Used either to transfer a data block to the card or to get a data block from the card - for general purpose/application specific commands. */ -#define SDMMC_CMD_NO_CMD ((uint8_t)64U) /*!< No command */ - -/** - * @brief Following commands are SD Card Specific commands. - * SDMMC_APP_CMD should be sent before sending these commands. - */ -#define SDMMC_CMD_APP_SD_SET_BUSWIDTH ((uint8_t)6U) /*!< (ACMD6) Defines the data bus width to be used for data transfer. The allowed data bus - widths are given in SCR register. */ -#define SDMMC_CMD_SD_APP_STATUS ((uint8_t)13U) /*!< (ACMD13) Sends the SD status. */ -#define SDMMC_CMD_SD_APP_SEND_NUM_WRITE_BLOCKS ((uint8_t)22U) /*!< (ACMD22) Sends the number of the written (without errors) write blocks. Responds with - 32bit+CRC data block. */ -#define SDMMC_CMD_SD_APP_OP_COND ((uint8_t)41U) /*!< (ACMD41) Sends host capacity support information (HCS) and asks the accessed card to - send its operating condition register (OCR) content in the response on the CMD line. */ -#define SDMMC_CMD_SD_APP_SET_CLR_CARD_DETECT ((uint8_t)42U) /*!< (ACMD42) Connect/Disconnect the 50 KOhm pull-up resistor on CD/DAT3 (pin 1) of the card */ -#define SDMMC_CMD_SD_APP_SEND_SCR ((uint8_t)51U) /*!< Reads the SD Configuration Register (SCR). */ -#define SDMMC_CMD_SDMMC_RW_DIRECT ((uint8_t)52U) /*!< For SD I/O card only, reserved for security specification. */ -#define SDMMC_CMD_SDMMC_RW_EXTENDED ((uint8_t)53U) /*!< For SD I/O card only, reserved for security specification. */ - -/** - * @brief Following commands are SD Card Specific security commands. - * SDMMC_CMD_APP_CMD should be sent before sending these commands. - */ -#define SDMMC_CMD_SD_APP_GET_MKB ((uint8_t)43U) -#define SDMMC_CMD_SD_APP_GET_MID ((uint8_t)44U) -#define SDMMC_CMD_SD_APP_SET_CER_RN1 ((uint8_t)45U) -#define SDMMC_CMD_SD_APP_GET_CER_RN2 ((uint8_t)46U) -#define SDMMC_CMD_SD_APP_SET_CER_RES2 ((uint8_t)47U) -#define SDMMC_CMD_SD_APP_GET_CER_RES1 ((uint8_t)48U) -#define SDMMC_CMD_SD_APP_SECURE_READ_MULTIPLE_BLOCK ((uint8_t)18U) -#define SDMMC_CMD_SD_APP_SECURE_WRITE_MULTIPLE_BLOCK ((uint8_t)25U) -#define SDMMC_CMD_SD_APP_SECURE_ERASE ((uint8_t)38U) -#define SDMMC_CMD_SD_APP_CHANGE_SECURE_AREA ((uint8_t)49U) -#define SDMMC_CMD_SD_APP_SECURE_WRITE_MKB ((uint8_t)48U) - -/** - * @brief Masks for errors Card Status R1 (OCR Register) - */ -#define SDMMC_OCR_ADDR_OUT_OF_RANGE ((uint32_t)0x80000000U) -#define SDMMC_OCR_ADDR_MISALIGNED ((uint32_t)0x40000000U) -#define SDMMC_OCR_BLOCK_LEN_ERR ((uint32_t)0x20000000U) -#define SDMMC_OCR_ERASE_SEQ_ERR ((uint32_t)0x10000000U) -#define SDMMC_OCR_BAD_ERASE_PARAM ((uint32_t)0x08000000U) -#define SDMMC_OCR_WRITE_PROT_VIOLATION ((uint32_t)0x04000000U) -#define SDMMC_OCR_LOCK_UNLOCK_FAILED ((uint32_t)0x01000000U) -#define SDMMC_OCR_COM_CRC_FAILED ((uint32_t)0x00800000U) -#define SDMMC_OCR_ILLEGAL_CMD ((uint32_t)0x00400000U) -#define SDMMC_OCR_CARD_ECC_FAILED ((uint32_t)0x00200000U) -#define SDMMC_OCR_CC_ERROR ((uint32_t)0x00100000U) -#define SDMMC_OCR_GENERAL_UNKNOWN_ERROR ((uint32_t)0x00080000U) -#define SDMMC_OCR_STREAM_READ_UNDERRUN ((uint32_t)0x00040000U) -#define SDMMC_OCR_STREAM_WRITE_OVERRUN ((uint32_t)0x00020000U) -#define SDMMC_OCR_CID_CSD_OVERWRITE ((uint32_t)0x00010000U) -#define SDMMC_OCR_WP_ERASE_SKIP ((uint32_t)0x00008000U) -#define SDMMC_OCR_CARD_ECC_DISABLED ((uint32_t)0x00004000U) -#define SDMMC_OCR_ERASE_RESET ((uint32_t)0x00002000U) -#define SDMMC_OCR_AKE_SEQ_ERROR ((uint32_t)0x00000008U) -#define SDMMC_OCR_ERRORBITS ((uint32_t)0xFDFFE008U) - -/** - * @brief Masks for R6 Response - */ -#define SDMMC_R6_GENERAL_UNKNOWN_ERROR ((uint32_t)0x00002000U) -#define SDMMC_R6_ILLEGAL_CMD ((uint32_t)0x00004000U) -#define SDMMC_R6_COM_CRC_FAILED ((uint32_t)0x00008000U) - -#define SDMMC_VOLTAGE_WINDOW_SD ((uint32_t)0x80100000U) -#define SDMMC_HIGH_CAPACITY ((uint32_t)0x40000000U) -#define SDMMC_STD_CAPACITY ((uint32_t)0x00000000U) -#define SDMMC_CHECK_PATTERN ((uint32_t)0x000001AAU) -#define SD_SWITCH_1_8V_CAPACITY ((uint32_t)0x01000000U) - -#define SDMMC_MAX_VOLT_TRIAL ((uint32_t)0x0000FFFFU) - -#define SDMMC_MAX_TRIAL ((uint32_t)0x0000FFFFU) - -#define SDMMC_ALLZERO ((uint32_t)0x00000000U) - -#define SDMMC_WIDE_BUS_SUPPORT ((uint32_t)0x00040000U) -#define SDMMC_SINGLE_BUS_SUPPORT ((uint32_t)0x00010000U) -#define SDMMC_CARD_LOCKED ((uint32_t)0x02000000U) - -#define SDMMC_DATATIMEOUT ((uint32_t)0xFFFFFFFFU) - -#define SDMMC_0TO7BITS ((uint32_t)0x000000FFU) -#define SDMMC_8TO15BITS ((uint32_t)0x0000FF00U) -#define SDMMC_16TO23BITS ((uint32_t)0x00FF0000U) -#define SDMMC_24TO31BITS ((uint32_t)0xFF000000U) -#define SDMMC_MAX_DATA_LENGTH ((uint32_t)0x01FFFFFFU) - -#define SDMMC_HALFFIFO ((uint32_t)0x00000008U) -#define SDMMC_HALFFIFOBYTES ((uint32_t)0x00000020U) - -/** - * @brief Command Class supported - */ -#define SDIO_CCCC_ERASE ((uint32_t)0x00000020U) - -#define SDIO_CMDTIMEOUT ((uint32_t)5000U) /* Command send and response timeout */ -#define SDIO_MAXERASETIMEOUT ((uint32_t)63000U) /* Max erase Timeout 63 s */ -#define SDIO_STOPTRANSFERTIMEOUT ((uint32_t)100000000U) /* Timeout for STOP TRANSMISSION command */ - -/** @defgroup SDIO_LL_Clock_Edge Clock Edge - * @{ - */ -#define SDIO_CLOCK_EDGE_RISING ((uint32_t)0x00000000U) -#define SDIO_CLOCK_EDGE_FALLING SDIO_CLKCR_NEGEDGE - -#define IS_SDIO_CLOCK_EDGE(EDGE) (((EDGE) == SDIO_CLOCK_EDGE_RISING) || \ - ((EDGE) == SDIO_CLOCK_EDGE_FALLING)) -/** - * @} - */ - -/** @defgroup SDIO_LL_Clock_Bypass Clock Bypass - * @{ - */ -#define SDIO_CLOCK_BYPASS_DISABLE ((uint32_t)0x00000000U) -#define SDIO_CLOCK_BYPASS_ENABLE SDIO_CLKCR_BYPASS - -#define IS_SDIO_CLOCK_BYPASS(BYPASS) (((BYPASS) == SDIO_CLOCK_BYPASS_DISABLE) || \ - ((BYPASS) == SDIO_CLOCK_BYPASS_ENABLE)) -/** - * @} - */ - -/** @defgroup SDIO_LL_Clock_Power_Save Clock Power Saving - * @{ - */ -#define SDIO_CLOCK_POWER_SAVE_DISABLE ((uint32_t)0x00000000U) -#define SDIO_CLOCK_POWER_SAVE_ENABLE SDIO_CLKCR_PWRSAV - -#define IS_SDIO_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDIO_CLOCK_POWER_SAVE_DISABLE) || \ - ((SAVE) == SDIO_CLOCK_POWER_SAVE_ENABLE)) -/** - * @} - */ - -/** @defgroup SDIO_LL_Bus_Wide Bus Width - * @{ - */ -#define SDIO_BUS_WIDE_1B ((uint32_t)0x00000000U) -#define SDIO_BUS_WIDE_4B SDIO_CLKCR_WIDBUS_0 -#define SDIO_BUS_WIDE_8B SDIO_CLKCR_WIDBUS_1 - -#define IS_SDIO_BUS_WIDE(WIDE) (((WIDE) == SDIO_BUS_WIDE_1B) || \ - ((WIDE) == SDIO_BUS_WIDE_4B) || \ - ((WIDE) == SDIO_BUS_WIDE_8B)) -/** - * @} - */ - -/** @defgroup SDIO_LL_Hardware_Flow_Control Hardware Flow Control - * @{ - */ -#define SDIO_HARDWARE_FLOW_CONTROL_DISABLE ((uint32_t)0x00000000U) -#define SDIO_HARDWARE_FLOW_CONTROL_ENABLE SDIO_CLKCR_HWFC_EN - -#define IS_SDIO_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDIO_HARDWARE_FLOW_CONTROL_DISABLE) || \ - ((CONTROL) == SDIO_HARDWARE_FLOW_CONTROL_ENABLE)) -/** - * @} - */ - -/** @defgroup SDIO_LL_Clock_Division Clock Division - * @{ - */ -#define IS_SDIO_CLKDIV(DIV) ((DIV) <= 0xFFU) -/** - * @} - */ - -/** @defgroup SDIO_LL_Command_Index Command Index - * @{ - */ -#define IS_SDIO_CMD_INDEX(INDEX) ((INDEX) < 0x40U) -/** - * @} - */ - -/** @defgroup SDIO_LL_Response_Type Response Type - * @{ - */ -#define SDIO_RESPONSE_NO ((uint32_t)0x00000000U) -#define SDIO_RESPONSE_SHORT SDIO_CMD_WAITRESP_0 -#define SDIO_RESPONSE_LONG SDIO_CMD_WAITRESP - -#define IS_SDIO_RESPONSE(RESPONSE) (((RESPONSE) == SDIO_RESPONSE_NO) || \ - ((RESPONSE) == SDIO_RESPONSE_SHORT) || \ - ((RESPONSE) == SDIO_RESPONSE_LONG)) -/** - * @} - */ - -/** @defgroup SDIO_LL_Wait_Interrupt_State Wait Interrupt - * @{ - */ -#define SDIO_WAIT_NO ((uint32_t)0x00000000U) -#define SDIO_WAIT_IT SDIO_CMD_WAITINT -#define SDIO_WAIT_PEND SDIO_CMD_WAITPEND - -#define IS_SDIO_WAIT(WAIT) (((WAIT) == SDIO_WAIT_NO) || \ - ((WAIT) == SDIO_WAIT_IT) || \ - ((WAIT) == SDIO_WAIT_PEND)) -/** - * @} - */ - -/** @defgroup SDIO_LL_CPSM_State CPSM State - * @{ - */ -#define SDIO_CPSM_DISABLE ((uint32_t)0x00000000U) -#define SDIO_CPSM_ENABLE SDIO_CMD_CPSMEN - -#define IS_SDIO_CPSM(CPSM) (((CPSM) == SDIO_CPSM_DISABLE) || \ - ((CPSM) == SDIO_CPSM_ENABLE)) -/** - * @} - */ - -/** @defgroup SDIO_LL_Response_Registers Response Register - * @{ - */ -#define SDIO_RESP1 ((uint32_t)0x00000000U) -#define SDIO_RESP2 ((uint32_t)0x00000004U) -#define SDIO_RESP3 ((uint32_t)0x00000008U) -#define SDIO_RESP4 ((uint32_t)0x0000000CU) - -#define IS_SDIO_RESP(RESP) (((RESP) == SDIO_RESP1) || \ - ((RESP) == SDIO_RESP2) || \ - ((RESP) == SDIO_RESP3) || \ - ((RESP) == SDIO_RESP4)) -/** - * @} - */ - -/** @defgroup SDIO_LL_Data_Length Data Lenght - * @{ - */ -#define IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFFU) -/** - * @} - */ - -/** @defgroup SDIO_LL_Data_Block_Size Data Block Size - * @{ - */ -#define SDIO_DATABLOCK_SIZE_1B ((uint32_t)0x00000000U) -#define SDIO_DATABLOCK_SIZE_2B SDIO_DCTRL_DBLOCKSIZE_0 -#define SDIO_DATABLOCK_SIZE_4B SDIO_DCTRL_DBLOCKSIZE_1 -#define SDIO_DATABLOCK_SIZE_8B (SDIO_DCTRL_DBLOCKSIZE_0|SDIO_DCTRL_DBLOCKSIZE_1) -#define SDIO_DATABLOCK_SIZE_16B SDIO_DCTRL_DBLOCKSIZE_2 -#define SDIO_DATABLOCK_SIZE_32B (SDIO_DCTRL_DBLOCKSIZE_0|SDIO_DCTRL_DBLOCKSIZE_2) -#define SDIO_DATABLOCK_SIZE_64B (SDIO_DCTRL_DBLOCKSIZE_1|SDIO_DCTRL_DBLOCKSIZE_2) -#define SDIO_DATABLOCK_SIZE_128B (SDIO_DCTRL_DBLOCKSIZE_0|SDIO_DCTRL_DBLOCKSIZE_1|SDIO_DCTRL_DBLOCKSIZE_2) -#define SDIO_DATABLOCK_SIZE_256B SDIO_DCTRL_DBLOCKSIZE_3 -#define SDIO_DATABLOCK_SIZE_512B (SDIO_DCTRL_DBLOCKSIZE_0|SDIO_DCTRL_DBLOCKSIZE_3) -#define SDIO_DATABLOCK_SIZE_1024B (SDIO_DCTRL_DBLOCKSIZE_1|SDIO_DCTRL_DBLOCKSIZE_3) -#define SDIO_DATABLOCK_SIZE_2048B (SDIO_DCTRL_DBLOCKSIZE_0|SDIO_DCTRL_DBLOCKSIZE_1|SDIO_DCTRL_DBLOCKSIZE_3) -#define SDIO_DATABLOCK_SIZE_4096B (SDIO_DCTRL_DBLOCKSIZE_2|SDIO_DCTRL_DBLOCKSIZE_3) -#define SDIO_DATABLOCK_SIZE_8192B (SDIO_DCTRL_DBLOCKSIZE_0|SDIO_DCTRL_DBLOCKSIZE_2|SDIO_DCTRL_DBLOCKSIZE_3) -#define SDIO_DATABLOCK_SIZE_16384B (SDIO_DCTRL_DBLOCKSIZE_1|SDIO_DCTRL_DBLOCKSIZE_2|SDIO_DCTRL_DBLOCKSIZE_3) - -#define IS_SDIO_BLOCK_SIZE(SIZE) (((SIZE) == SDIO_DATABLOCK_SIZE_1B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_2B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_4B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_8B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_16B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_32B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_64B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_128B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_256B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_512B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_1024B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_2048B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_4096B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_8192B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_16384B)) -/** - * @} - */ - -/** @defgroup SDIO_LL_Transfer_Direction Transfer Direction - * @{ - */ -#define SDIO_TRANSFER_DIR_TO_CARD ((uint32_t)0x00000000U) -#define SDIO_TRANSFER_DIR_TO_SDIO SDIO_DCTRL_DTDIR - -#define IS_SDIO_TRANSFER_DIR(DIR) (((DIR) == SDIO_TRANSFER_DIR_TO_CARD) || \ - ((DIR) == SDIO_TRANSFER_DIR_TO_SDIO)) -/** - * @} - */ - -/** @defgroup SDIO_LL_Transfer_Type Transfer Type - * @{ - */ -#define SDIO_TRANSFER_MODE_BLOCK ((uint32_t)0x00000000U) -#define SDIO_TRANSFER_MODE_STREAM SDIO_DCTRL_DTMODE - -#define IS_SDIO_TRANSFER_MODE(MODE) (((MODE) == SDIO_TRANSFER_MODE_BLOCK) || \ - ((MODE) == SDIO_TRANSFER_MODE_STREAM)) -/** - * @} - */ - -/** @defgroup SDIO_LL_DPSM_State DPSM State - * @{ - */ -#define SDIO_DPSM_DISABLE ((uint32_t)0x00000000U) -#define SDIO_DPSM_ENABLE SDIO_DCTRL_DTEN - -#define IS_SDIO_DPSM(DPSM) (((DPSM) == SDIO_DPSM_DISABLE) ||\ - ((DPSM) == SDIO_DPSM_ENABLE)) -/** - * @} - */ - -/** @defgroup SDIO_LL_Read_Wait_Mode Read Wait Mode - * @{ - */ -#define SDIO_READ_WAIT_MODE_DATA2 ((uint32_t)0x00000000U) -#define SDIO_READ_WAIT_MODE_CLK (SDIO_DCTRL_RWMOD) - -#define IS_SDIO_READWAIT_MODE(MODE) (((MODE) == SDIO_READ_WAIT_MODE_CLK) || \ - ((MODE) == SDIO_READ_WAIT_MODE_DATA2)) -/** - * @} - */ - -/** @defgroup SDIO_LL_Interrupt_sources Interrupt Sources - * @{ - */ -#define SDIO_IT_CCRCFAIL SDIO_MASK_CCRCFAILIE -#define SDIO_IT_DCRCFAIL SDIO_MASK_DCRCFAILIE -#define SDIO_IT_CTIMEOUT SDIO_MASK_CTIMEOUTIE -#define SDIO_IT_DTIMEOUT SDIO_MASK_DTIMEOUTIE -#define SDIO_IT_TXUNDERR SDIO_MASK_TXUNDERRIE -#define SDIO_IT_RXOVERR SDIO_MASK_RXOVERRIE -#define SDIO_IT_CMDREND SDIO_MASK_CMDRENDIE -#define SDIO_IT_CMDSENT SDIO_MASK_CMDSENTIE -#define SDIO_IT_DATAEND SDIO_MASK_DATAENDIE -#define SDIO_IT_STBITERR SDIO_MASK_STBITERRIE -#define SDIO_IT_DBCKEND SDIO_MASK_DBCKENDIE -#define SDIO_IT_CMDACT SDIO_MASK_CMDACTIE -#define SDIO_IT_TXACT SDIO_MASK_TXACTIE -#define SDIO_IT_RXACT SDIO_MASK_RXACTIE -#define SDIO_IT_TXFIFOHE SDIO_MASK_TXFIFOHEIE -#define SDIO_IT_RXFIFOHF SDIO_MASK_RXFIFOHFIE -#define SDIO_IT_TXFIFOF SDIO_MASK_TXFIFOFIE -#define SDIO_IT_RXFIFOF SDIO_MASK_RXFIFOFIE -#define SDIO_IT_TXFIFOE SDIO_MASK_TXFIFOEIE -#define SDIO_IT_RXFIFOE SDIO_MASK_RXFIFOEIE -#define SDIO_IT_TXDAVL SDIO_MASK_TXDAVLIE -#define SDIO_IT_RXDAVL SDIO_MASK_RXDAVLIE -#define SDIO_IT_SDIOIT SDIO_MASK_SDIOITIE -#define SDIO_IT_CEATAEND SDIO_MASK_CEATAENDIE -/** - * @} - */ - -/** @defgroup SDIO_LL_Flags Flags - * @{ - */ -#define SDIO_FLAG_CCRCFAIL SDIO_STA_CCRCFAIL -#define SDIO_FLAG_DCRCFAIL SDIO_STA_DCRCFAIL -#define SDIO_FLAG_CTIMEOUT SDIO_STA_CTIMEOUT -#define SDIO_FLAG_DTIMEOUT SDIO_STA_DTIMEOUT -#define SDIO_FLAG_TXUNDERR SDIO_STA_TXUNDERR -#define SDIO_FLAG_RXOVERR SDIO_STA_RXOVERR -#define SDIO_FLAG_CMDREND SDIO_STA_CMDREND -#define SDIO_FLAG_CMDSENT SDIO_STA_CMDSENT -#define SDIO_FLAG_DATAEND SDIO_STA_DATAEND -#define SDIO_FLAG_STBITERR SDIO_STA_STBITERR -#define SDIO_FLAG_DBCKEND SDIO_STA_DBCKEND -#define SDIO_FLAG_CMDACT SDIO_STA_CMDACT -#define SDIO_FLAG_TXACT SDIO_STA_TXACT -#define SDIO_FLAG_RXACT SDIO_STA_RXACT -#define SDIO_FLAG_TXFIFOHE SDIO_STA_TXFIFOHE -#define SDIO_FLAG_RXFIFOHF SDIO_STA_RXFIFOHF -#define SDIO_FLAG_TXFIFOF SDIO_STA_TXFIFOF -#define SDIO_FLAG_RXFIFOF SDIO_STA_RXFIFOF -#define SDIO_FLAG_TXFIFOE SDIO_STA_TXFIFOE -#define SDIO_FLAG_RXFIFOE SDIO_STA_RXFIFOE -#define SDIO_FLAG_TXDAVL SDIO_STA_TXDAVL -#define SDIO_FLAG_RXDAVL SDIO_STA_RXDAVL -#define SDIO_FLAG_SDIOIT SDIO_STA_SDIOIT -#define SDIO_FLAG_CEATAEND SDIO_STA_CEATAEND -#define SDIO_STATIC_FLAGS ((uint32_t)(SDIO_FLAG_CCRCFAIL | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_CTIMEOUT |\ - SDIO_FLAG_DTIMEOUT | SDIO_FLAG_TXUNDERR | SDIO_FLAG_RXOVERR |\ - SDIO_FLAG_CMDREND | SDIO_FLAG_CMDSENT | SDIO_FLAG_DATAEND |\ - SDIO_FLAG_DBCKEND | SDIO_FLAG_SDIOIT)) - -#define SDIO_STATIC_CMD_FLAGS ((uint32_t)(SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CTIMEOUT | SDIO_FLAG_CMDREND |\ - SDIO_FLAG_CMDSENT)) - -#define SDIO_STATIC_DATA_FLAGS ((uint32_t)(SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_TXUNDERR |\ - SDIO_FLAG_RXOVERR | SDIO_FLAG_DATAEND | SDIO_FLAG_DBCKEND)) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup SDIO_LL_Exported_macros SDIO_LL Exported Macros - * @{ - */ - -/** @defgroup SDMMC_LL_Alias_Region Bit Address in the alias region - * @{ - */ -/* ------------ SDIO registers bit address in the alias region -------------- */ -#define SDIO_OFFSET (SDIO_BASE - PERIPH_BASE) - -/* --- CLKCR Register ---*/ -/* Alias word address of CLKEN bit */ -#define CLKCR_OFFSET (SDIO_OFFSET + 0x04U) -#define CLKEN_BITNUMBER 0x08U -#define CLKCR_CLKEN_BB (PERIPH_BB_BASE + (CLKCR_OFFSET * 32U) + (CLKEN_BITNUMBER * 4U)) - -/* --- CMD Register ---*/ -/* Alias word address of SDIOSUSPEND bit */ -#define CMD_OFFSET (SDIO_OFFSET + 0x0CU) -#define SDIOSUSPEND_BITNUMBER 0x0BU -#define CMD_SDIOSUSPEND_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32U) + (SDIOSUSPEND_BITNUMBER * 4U)) - -/* Alias word address of ENCMDCOMPL bit */ -#define ENCMDCOMPL_BITNUMBER 0x0CU -#define CMD_ENCMDCOMPL_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32U) + (ENCMDCOMPL_BITNUMBER * 4U)) - -/* Alias word address of NIEN bit */ -#define NIEN_BITNUMBER 0x0DU -#define CMD_NIEN_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32U) + (NIEN_BITNUMBER * 4U)) - -/* Alias word address of ATACMD bit */ -#define ATACMD_BITNUMBER 0x0EU -#define CMD_ATACMD_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32U) + (ATACMD_BITNUMBER * 4U)) - -/* --- DCTRL Register ---*/ -/* Alias word address of DMAEN bit */ -#define DCTRL_OFFSET (SDIO_OFFSET + 0x2CU) -#define DMAEN_BITNUMBER 0x03U -#define DCTRL_DMAEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32U) + (DMAEN_BITNUMBER * 4U)) - -/* Alias word address of RWSTART bit */ -#define RWSTART_BITNUMBER 0x08U -#define DCTRL_RWSTART_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32U) + (RWSTART_BITNUMBER * 4U)) - -/* Alias word address of RWSTOP bit */ -#define RWSTOP_BITNUMBER 0x09U -#define DCTRL_RWSTOP_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32U) + (RWSTOP_BITNUMBER * 4U)) - -/* Alias word address of RWMOD bit */ -#define RWMOD_BITNUMBER 0x0AU -#define DCTRL_RWMOD_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32U) + (RWMOD_BITNUMBER * 4U)) - -/* Alias word address of SDIOEN bit */ -#define SDIOEN_BITNUMBER 0x0BU -#define DCTRL_SDIOEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32U) + (SDIOEN_BITNUMBER * 4U)) -/** - * @} - */ - -/** @defgroup SDIO_LL_Register Bits And Addresses Definitions - * @brief SDIO_LL registers bit address in the alias region - * @{ - */ -/* ---------------------- SDIO registers bit mask --------------------------- */ -/* --- CLKCR Register ---*/ -/* CLKCR register clear mask */ -#define CLKCR_CLEAR_MASK ((uint32_t)(SDIO_CLKCR_CLKDIV | SDIO_CLKCR_PWRSAV |\ - SDIO_CLKCR_BYPASS | SDIO_CLKCR_WIDBUS |\ - SDIO_CLKCR_NEGEDGE | SDIO_CLKCR_HWFC_EN)) - -/* --- DCTRL Register ---*/ -/* SDIO DCTRL Clear Mask */ -#define DCTRL_CLEAR_MASK ((uint32_t)(SDIO_DCTRL_DTEN | SDIO_DCTRL_DTDIR |\ - SDIO_DCTRL_DTMODE | SDIO_DCTRL_DBLOCKSIZE)) - -/* --- CMD Register ---*/ -/* CMD Register clear mask */ -#define CMD_CLEAR_MASK ((uint32_t)(SDIO_CMD_CMDINDEX | SDIO_CMD_WAITRESP |\ - SDIO_CMD_WAITINT | SDIO_CMD_WAITPEND |\ - SDIO_CMD_CPSMEN | SDIO_CMD_SDIOSUSPEND)) - -/* SDIO Initialization Frequency (400KHz max) */ -#define SDIO_INIT_CLK_DIV ((uint8_t)0x76) /* 48MHz / (SDMMC_INIT_CLK_DIV + 2) < 400KHz */ - -/* SDIO Data Transfer Frequency (25MHz max) */ -#define SDIO_TRANSFER_CLK_DIV ((uint8_t)0x4) -/** - * @} - */ - -/** @defgroup SDIO_LL_Interrupt_Clock Interrupt And Clock Configuration - * @brief macros to handle interrupts and specific clock configurations - * @{ - */ - -/** - * @brief Enable the SDIO device. - * @param __INSTANCE__: SDIO Instance - * @retval None - */ -#define __SDIO_ENABLE(__INSTANCE__) (*(__IO uint32_t *)CLKCR_CLKEN_BB = ENABLE) - -/** - * @brief Disable the SDIO device. - * @param __INSTANCE__: SDIO Instance - * @retval None - */ -#define __SDIO_DISABLE(__INSTANCE__) (*(__IO uint32_t *)CLKCR_CLKEN_BB = DISABLE) - -/** - * @brief Enable the SDIO DMA transfer. - * @param __INSTANCE__: SDIO Instance - * @retval None - */ -#define __SDIO_DMA_ENABLE(__INSTANCE__) (*(__IO uint32_t *)DCTRL_DMAEN_BB = ENABLE) - -/** - * @brief Disable the SDIO DMA transfer. - * @param __INSTANCE__: SDIO Instance - * @retval None - */ -#define __SDIO_DMA_DISABLE(__INSTANCE__) (*(__IO uint32_t *)DCTRL_DMAEN_BB = DISABLE) - -/** - * @brief Enable the SDIO device interrupt. - * @param __INSTANCE__ : Pointer to SDIO register base - * @param __INTERRUPT__ : specifies the SDIO interrupt sources to be enabled. - * This parameter can be one or a combination of the following values: - * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt - * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt - * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt - * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt - * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt - * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt - * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt - * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt - * @arg SDIO_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt - * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt - * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt - * @arg SDIO_IT_TXACT: Data transmit in progress interrupt - * @arg SDIO_IT_RXACT: Data receive in progress interrupt - * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt - * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt - * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt - * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt - * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt - * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt - * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt - * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt - * @arg SDIO_IT_SDIOIT: SDIO interrupt received interrupt - * @retval None - */ -#define __SDIO_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->MASK |= (__INTERRUPT__)) - -/** - * @brief Disable the SDIO device interrupt. - * @param __INSTANCE__ : Pointer to SDIO register base - * @param __INTERRUPT__ : specifies the SDIO interrupt sources to be disabled. - * This parameter can be one or a combination of the following values: - * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt - * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt - * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt - * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt - * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt - * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt - * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt - * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt - * @arg SDIO_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt - * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt - * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt - * @arg SDIO_IT_TXACT: Data transmit in progress interrupt - * @arg SDIO_IT_RXACT: Data receive in progress interrupt - * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt - * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt - * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt - * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt - * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt - * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt - * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt - * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt - * @arg SDIO_IT_SDIOIT: SDIO interrupt received interrupt - * @retval None - */ -#define __SDIO_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->MASK &= ~(__INTERRUPT__)) - -/** - * @brief Checks whether the specified SDIO flag is set or not. - * @param __INSTANCE__ : Pointer to SDIO register base - * @param __FLAG__: specifies the flag to check. - * This parameter can be one of the following values: - * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) - * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) - * @arg SDIO_FLAG_CTIMEOUT: Command response timeout - * @arg SDIO_FLAG_DTIMEOUT: Data timeout - * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error - * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error - * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) - * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) - * @arg SDIO_FLAG_DATAEND: Data end (data counter, DATACOUNT, is zero) - * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) - * @arg SDIO_FLAG_CMDACT: Command transfer in progress - * @arg SDIO_FLAG_TXACT: Data transmit in progress - * @arg SDIO_FLAG_RXACT: Data receive in progress - * @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty - * @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full - * @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full - * @arg SDIO_FLAG_RXFIFOF: Receive FIFO full - * @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty - * @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty - * @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO - * @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO - * @arg SDIO_FLAG_SDIOIT: SDIO interrupt received - * @retval The new state of SDIO_FLAG (SET or RESET). - */ -#define __SDIO_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->STA &(__FLAG__)) != 0U) - - -/** - * @brief Clears the SDIO pending flags. - * @param __INSTANCE__ : Pointer to SDIO register base - * @param __FLAG__: specifies the flag to clear. - * This parameter can be one or a combination of the following values: - * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) - * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) - * @arg SDIO_FLAG_CTIMEOUT: Command response timeout - * @arg SDIO_FLAG_DTIMEOUT: Data timeout - * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error - * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error - * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) - * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) - * @arg SDIO_FLAG_DATAEND: Data end (data counter, DATACOUNT, is zero) - * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) - * @arg SDIO_FLAG_SDIOIT: SDIO interrupt received - * @retval None - */ -#define __SDIO_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->ICR = (__FLAG__)) - -/** - * @brief Checks whether the specified SDIO interrupt has occurred or not. - * @param __INSTANCE__ : Pointer to SDIO register base - * @param __INTERRUPT__: specifies the SDIO interrupt source to check. - * This parameter can be one of the following values: - * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt - * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt - * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt - * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt - * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt - * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt - * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt - * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt - * @arg SDIO_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt - * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt - * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt - * @arg SDIO_IT_TXACT: Data transmit in progress interrupt - * @arg SDIO_IT_RXACT: Data receive in progress interrupt - * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt - * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt - * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt - * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt - * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt - * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt - * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt - * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt - * @arg SDIO_IT_SDIOIT: SDIO interrupt received interrupt - * @retval The new state of SDIO_IT (SET or RESET). - */ -#define __SDIO_GET_IT (__INSTANCE__, __INTERRUPT__) (((__INSTANCE__)->STA &(__INTERRUPT__)) == (__INTERRUPT__)) - -/** - * @brief Clears the SDIO's interrupt pending bits. - * @param __INSTANCE__ : Pointer to SDIO register base - * @param __INTERRUPT__: specifies the interrupt pending bit to clear. - * This parameter can be one or a combination of the following values: - * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt - * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt - * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt - * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt - * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt - * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt - * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt - * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt - * @arg SDIO_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt - * @arg SDIO_IT_SDIOIT: SDIO interrupt received interrupt - * @retval None - */ -#define __SDIO_CLEAR_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->ICR = (__INTERRUPT__)) - -/** - * @brief Enable Start the SD I/O Read Wait operation. - * @param __INSTANCE__ : Pointer to SDIO register base - * @retval None - */ -#define __SDIO_START_READWAIT_ENABLE(__INSTANCE__) (*(__IO uint32_t *) DCTRL_RWSTART_BB = ENABLE) - -/** - * @brief Disable Start the SD I/O Read Wait operations. - * @param __INSTANCE__ : Pointer to SDIO register base - * @retval None - */ -#define __SDIO_START_READWAIT_DISABLE(__INSTANCE__) (*(__IO uint32_t *) DCTRL_RWSTART_BB = DISABLE) - -/** - * @brief Enable Start the SD I/O Read Wait operation. - * @param __INSTANCE__ : Pointer to SDIO register base - * @retval None - */ -#define __SDIO_STOP_READWAIT_ENABLE(__INSTANCE__) (*(__IO uint32_t *) DCTRL_RWSTOP_BB = ENABLE) - -/** - * @brief Disable Stop the SD I/O Read Wait operations. - * @param __INSTANCE__ : Pointer to SDIO register base - * @retval None - */ -#define __SDIO_STOP_READWAIT_DISABLE(__INSTANCE__) (*(__IO uint32_t *) DCTRL_RWSTOP_BB = DISABLE) - -/** - * @brief Enable the SD I/O Mode Operation. - * @param __INSTANCE__ : Pointer to SDIO register base - * @retval None - */ -#define __SDIO_OPERATION_ENABLE(__INSTANCE__) (*(__IO uint32_t *) DCTRL_SDIOEN_BB = ENABLE) - -/** - * @brief Disable the SD I/O Mode Operation. - * @param __INSTANCE__ : Pointer to SDIO register base - * @retval None - */ -#define __SDIO_OPERATION_DISABLE(__INSTANCE__) (*(__IO uint32_t *) DCTRL_SDIOEN_BB = DISABLE) - -/** - * @brief Enable the SD I/O Suspend command sending. - * @param __INSTANCE__ : Pointer to SDIO register base - * @retval None - */ -#define __SDIO_SUSPEND_CMD_ENABLE(__INSTANCE__) (*(__IO uint32_t *) CMD_SDIOSUSPEND_BB = ENABLE) - -/** - * @brief Disable the SD I/O Suspend command sending. - * @param __INSTANCE__ : Pointer to SDIO register base - * @retval None - */ -#define __SDIO_SUSPEND_CMD_DISABLE(__INSTANCE__) (*(__IO uint32_t *) CMD_SDIOSUSPEND_BB = DISABLE) - -/** - * @brief Enable the command completion signal. - * @retval None - */ -#define __SDIO_CEATA_CMD_COMPLETION_ENABLE() (*(__IO uint32_t *) CMD_ENCMDCOMPL_BB = ENABLE) - -/** - * @brief Disable the command completion signal. - * @retval None - */ -#define __SDIO_CEATA_CMD_COMPLETION_DISABLE() (*(__IO uint32_t *) CMD_ENCMDCOMPL_BB = DISABLE) - -/** - * @brief Enable the CE-ATA interrupt. - * @retval None - */ -#define __SDIO_CEATA_ENABLE_IT() (*(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)0U) - -/** - * @brief Disable the CE-ATA interrupt. - * @retval None - */ -#define __SDIO_CEATA_DISABLE_IT() (*(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)1U) - -/** - * @brief Enable send CE-ATA command (CMD61). - * @retval None - */ -#define __SDIO_CEATA_SENDCMD_ENABLE() (*(__IO uint32_t *) CMD_ATACMD_BB = ENABLE) - -/** - * @brief Disable send CE-ATA command (CMD61). - * @retval None - */ -#define __SDIO_CEATA_SENDCMD_DISABLE() (*(__IO uint32_t *) CMD_ATACMD_BB = DISABLE) - -/** - * @} - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup SDMMC_LL_Exported_Functions - * @{ - */ - -/* Initialization/de-initialization functions **********************************/ -/** @addtogroup HAL_SDMMC_LL_Group1 - * @{ - */ -HAL_StatusTypeDef SDIO_Init(SDIO_TypeDef *SDIOx, SDIO_InitTypeDef Init); -/** - * @} - */ - -/* I/O operation functions *****************************************************/ -/** @addtogroup HAL_SDMMC_LL_Group2 - * @{ - */ -uint32_t SDIO_ReadFIFO(SDIO_TypeDef *SDIOx); -HAL_StatusTypeDef SDIO_WriteFIFO(SDIO_TypeDef *SDIOx, uint32_t *pWriteData); -/** - * @} - */ - -/* Peripheral Control functions ************************************************/ -/** @addtogroup HAL_SDMMC_LL_Group3 - * @{ - */ -HAL_StatusTypeDef SDIO_PowerState_ON(SDIO_TypeDef *SDIOx); -HAL_StatusTypeDef SDIO_PowerState_OFF(SDIO_TypeDef *SDIOx); -uint32_t SDIO_GetPowerState(SDIO_TypeDef *SDIOx); - -/* Command path state machine (CPSM) management functions */ -HAL_StatusTypeDef SDIO_SendCommand(SDIO_TypeDef *SDIOx, SDIO_CmdInitTypeDef *Command); -uint8_t SDIO_GetCommandResponse(SDIO_TypeDef *SDIOx); -uint32_t SDIO_GetResponse(SDIO_TypeDef *SDIOx, uint32_t Response); - -/* Data path state machine (DPSM) management functions */ -HAL_StatusTypeDef SDIO_ConfigData(SDIO_TypeDef *SDIOx, SDIO_DataInitTypeDef* Data); -uint32_t SDIO_GetDataCounter(SDIO_TypeDef *SDIOx); -uint32_t SDIO_GetFIFOCount(SDIO_TypeDef *SDIOx); - -/* SDMMC Cards mode management functions */ -HAL_StatusTypeDef SDIO_SetSDMMCReadWaitMode(SDIO_TypeDef *SDIOx, uint32_t SDIO_ReadWaitMode); - -/* SDMMC Commands management functions */ -uint32_t SDMMC_CmdBlockLength(SDIO_TypeDef *SDIOx, uint32_t BlockSize); -uint32_t SDMMC_CmdReadSingleBlock(SDIO_TypeDef *SDIOx, uint32_t ReadAdd); -uint32_t SDMMC_CmdReadMultiBlock(SDIO_TypeDef *SDIOx, uint32_t ReadAdd); -uint32_t SDMMC_CmdWriteSingleBlock(SDIO_TypeDef *SDIOx, uint32_t WriteAdd); -uint32_t SDMMC_CmdWriteMultiBlock(SDIO_TypeDef *SDIOx, uint32_t WriteAdd); -uint32_t SDMMC_CmdEraseStartAdd(SDIO_TypeDef *SDIOx, uint32_t StartAdd); -uint32_t SDMMC_CmdSDEraseStartAdd(SDIO_TypeDef *SDIOx, uint32_t StartAdd); -uint32_t SDMMC_CmdEraseEndAdd(SDIO_TypeDef *SDIOx, uint32_t EndAdd); -uint32_t SDMMC_CmdSDEraseEndAdd(SDIO_TypeDef *SDIOx, uint32_t EndAdd); -uint32_t SDMMC_CmdErase(SDIO_TypeDef *SDIOx); -uint32_t SDMMC_CmdStopTransfer(SDIO_TypeDef *SDIOx); -uint32_t SDMMC_CmdSelDesel(SDIO_TypeDef *SDIOx, uint64_t Addr); -uint32_t SDMMC_CmdGoIdleState(SDIO_TypeDef *SDIOx); -uint32_t SDMMC_CmdOperCond(SDIO_TypeDef *SDIOx); -uint32_t SDMMC_CmdAppCommand(SDIO_TypeDef *SDIOx, uint32_t Argument); -uint32_t SDMMC_CmdAppOperCommand(SDIO_TypeDef *SDIOx, uint32_t Argument); -uint32_t SDMMC_CmdBusWidth(SDIO_TypeDef *SDIOx, uint32_t BusWidth); -uint32_t SDMMC_CmdSendSCR(SDIO_TypeDef *SDIOx); -uint32_t SDMMC_CmdSendCID(SDIO_TypeDef *SDIOx); -uint32_t SDMMC_CmdSendCSD(SDIO_TypeDef *SDIOx, uint32_t Argument); -uint32_t SDMMC_CmdSetRelAdd(SDIO_TypeDef *SDIOx, uint16_t *pRCA); -uint32_t SDMMC_CmdSendStatus(SDIO_TypeDef *SDIOx, uint32_t Argument); -uint32_t SDMMC_CmdStatusRegister(SDIO_TypeDef *SDIOx); -uint32_t SDMMC_CmdOpCondition(SDIO_TypeDef *SDIOx, uint32_t Argument); -uint32_t SDMMC_CmdSwitch(SDIO_TypeDef *SDIOx, uint32_t Argument); - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* SDIO */ - -#ifdef __cplusplus -} -#endif - -#endif /* STM32F1xx_LL_SDMMC_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit v1.2.3-70-g09d2