From 664c869f7749da96bbea7307beb043dfe52593c5 Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Sun, 28 Jul 2019 23:23:18 -0400 Subject: lib: Remove unused stm32f1 "hal" code Now that the stm32f1 code has been merged into the stm32 code, there is no longer a need to use the upstream stm32f1 "hal" code. Signed-off-by: Kevin O'Connor --- lib/stm32f1/hal/include/stm32f1xx_hal_smartcard.h | 745 ---------------------- 1 file changed, 745 deletions(-) delete mode 100644 lib/stm32f1/hal/include/stm32f1xx_hal_smartcard.h (limited to 'lib/stm32f1/hal/include/stm32f1xx_hal_smartcard.h') diff --git a/lib/stm32f1/hal/include/stm32f1xx_hal_smartcard.h b/lib/stm32f1/hal/include/stm32f1xx_hal_smartcard.h deleted file mode 100644 index 79f0441a..00000000 --- a/lib/stm32f1/hal/include/stm32f1xx_hal_smartcard.h +++ /dev/null @@ -1,745 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_smartcard.h - * @author MCD Application Team - * @brief Header file of SMARTCARD HAL module. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F1xx_HAL_SMARTCARD_H -#define __STM32F1xx_HAL_SMARTCARD_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal_def.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - -/** @addtogroup SMARTCARD - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup SMARTCARD_Exported_Types SMARTCARD Exported Types - * @{ - */ - -/** - * @brief SMARTCARD Init Structure definition - */ -typedef struct -{ - uint32_t BaudRate; /*!< This member configures the SmartCard communication baud rate. - The baud rate is computed using the following formula: - - IntegerDivider = ((PCLKx) / (16 * (hsc->Init.BaudRate))) - - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 16) + 0.5 */ - - uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. - This parameter can be a value of @ref SMARTCARD_Word_Length */ - - uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. - This parameter can be a value of @ref SMARTCARD_Stop_Bits */ - - uint32_t Parity; /*!< Specifies the parity mode. - This parameter can be a value of @ref SMARTCARD_Parity - @note When parity is enabled, the computed parity is inserted - at the MSB position of the transmitted data (9th bit when - the word length is set to 9 data bits; 8th bit when the - word length is set to 8 data bits).*/ - - uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. - This parameter can be a value of @ref SMARTCARD_Mode */ - - uint32_t CLKPolarity; /*!< Specifies the steady state of the serial clock. - This parameter can be a value of @ref SMARTCARD_Clock_Polarity */ - - uint32_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made. - This parameter can be a value of @ref SMARTCARD_Clock_Phase */ - - uint32_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted - data bit (MSB) has to be output on the SCLK pin in synchronous mode. - This parameter can be a value of @ref SMARTCARD_Last_Bit */ - - uint32_t Prescaler; /*!< Specifies the SmartCard Prescaler value used for dividing the system clock - to provide the smartcard clock. The value given in the register (5 significant bits) - is multiplied by 2 to give the division factor of the source clock frequency. - This parameter can be a value of @ref SMARTCARD_Prescaler */ - - uint32_t GuardTime; /*!< Specifies the SmartCard Guard Time value in terms of number of baud clocks */ - - uint32_t NACKState; /*!< Specifies the SmartCard NACK Transmission state. - This parameter can be a value of @ref SMARTCARD_NACK_State */ -}SMARTCARD_InitTypeDef; - -/** - * @brief HAL SMARTCARD State structures definition - * @note HAL SMARTCARD State value is a combination of 2 different substates: gState and RxState. - * - gState contains SMARTCARD state information related to global Handle management - * and also information related to Tx operations. - * gState value coding follow below described bitmap : - * b7-b6 Error information - * 00 : No Error - * 01 : (Not Used) - * 10 : Timeout - * 11 : Error - * b5 IP initilisation status - * 0 : Reset (IP not initialized) - * 1 : Init done (IP not initialized. HAL SMARTCARD Init function already called) - * b4-b3 (not used) - * xx : Should be set to 00 - * b2 Intrinsic process state - * 0 : Ready - * 1 : Busy (IP busy with some configuration or internal operations) - * b1 (not used) - * x : Should be set to 0 - * b0 Tx state - * 0 : Ready (no Tx operation ongoing) - * 1 : Busy (Tx operation ongoing) - * - RxState contains information related to Rx operations. - * RxState value coding follow below described bitmap : - * b7-b6 (not used) - * xx : Should be set to 00 - * b5 IP initilisation status - * 0 : Reset (IP not initialized) - * 1 : Init done (IP not initialized) - * b4-b2 (not used) - * xxx : Should be set to 000 - * b1 Rx state - * 0 : Ready (no Rx operation ongoing) - * 1 : Busy (Rx operation ongoing) - * b0 (not used) - * x : Should be set to 0. - */ -typedef enum -{ - HAL_SMARTCARD_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized - Value is allowed for gState and RxState */ - HAL_SMARTCARD_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use - Value is allowed for gState and RxState */ - HAL_SMARTCARD_STATE_BUSY = 0x24U, /*!< an internal process is ongoing - Value is allowed for gState only */ - HAL_SMARTCARD_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing - Value is allowed for gState only */ - HAL_SMARTCARD_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing - Value is allowed for RxState only */ - HAL_SMARTCARD_STATE_BUSY_TX_RX = 0x23U, /*!< Data Transmission and Reception process is ongoing - Not to be used for neither gState nor RxState. - Value is result of combination (Or) between gState and RxState values */ - HAL_SMARTCARD_STATE_TIMEOUT = 0xA0U, /*!< Timeout state - Value is allowed for gState only */ - HAL_SMARTCARD_STATE_ERROR = 0xE0U /*!< Error - Value is allowed for gState only */ -}HAL_SMARTCARD_StateTypeDef; - -/** - * @brief SMARTCARD handle Structure definition - */ -typedef struct __SMARTCARD_HandleTypeDef -{ - USART_TypeDef *Instance; /*!< USART registers base address */ - - SMARTCARD_InitTypeDef Init; /*!< SmartCard communication parameters */ - - uint8_t *pTxBuffPtr; /*!< Pointer to SmartCard Tx transfer Buffer */ - - uint16_t TxXferSize; /*!< SmartCard Tx Transfer size */ - - __IO uint16_t TxXferCount; /*!< SmartCard Tx Transfer Counter */ - - uint8_t *pRxBuffPtr; /*!< Pointer to SmartCard Rx transfer Buffer */ - - uint16_t RxXferSize; /*!< SmartCard Rx Transfer size */ - - __IO uint16_t RxXferCount; /*!< SmartCard Rx Transfer Counter */ - - DMA_HandleTypeDef *hdmatx; /*!< SmartCard Tx DMA Handle parameters */ - - DMA_HandleTypeDef *hdmarx; /*!< SmartCard Rx DMA Handle parameters */ - - HAL_LockTypeDef Lock; /*!< Locking object */ - - __IO HAL_SMARTCARD_StateTypeDef gState; /*!< SmartCard state information related to global Handle management - and also related to Tx operations. - This parameter can be a value of @ref HAL_SMARTCARD_StateTypeDef */ - - __IO HAL_SMARTCARD_StateTypeDef RxState; /*!< SmartCard state information related to Rx operations. - This parameter can be a value of @ref HAL_SMARTCARD_StateTypeDef */ - - __IO uint32_t ErrorCode; /*!< SmartCard Error code */ - -#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) - void (* TxCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Tx Complete Callback */ - - void (* RxCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Rx Complete Callback */ - - void (* ErrorCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Error Callback */ - - void (* AbortCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Abort Complete Callback */ - - void (* AbortTransmitCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Abort Transmit Complete Callback */ - - void (* AbortReceiveCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Abort Receive Complete Callback */ - - void (* MspInitCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Msp Init callback */ - - void (* MspDeInitCallback)(struct __SMARTCARD_HandleTypeDef *hsc); /*!< SMARTCARD Msp DeInit callback */ -#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ - -} SMARTCARD_HandleTypeDef; - -#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) -/** - * @brief HAL SMARTCARD Callback ID enumeration definition - */ -typedef enum -{ - HAL_SMARTCARD_TX_COMPLETE_CB_ID = 0x00U, /*!< SMARTCARD Tx Complete Callback ID */ - HAL_SMARTCARD_RX_COMPLETE_CB_ID = 0x01U, /*!< SMARTCARD Rx Complete Callback ID */ - HAL_SMARTCARD_ERROR_CB_ID = 0x02U, /*!< SMARTCARD Error Callback ID */ - HAL_SMARTCARD_ABORT_COMPLETE_CB_ID = 0x03U, /*!< SMARTCARD Abort Complete Callback ID */ - HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x04U, /*!< SMARTCARD Abort Transmit Complete Callback ID */ - HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID = 0x05U, /*!< SMARTCARD Abort Receive Complete Callback ID */ - - HAL_SMARTCARD_MSPINIT_CB_ID = 0x08U, /*!< SMARTCARD MspInit callback ID */ - HAL_SMARTCARD_MSPDEINIT_CB_ID = 0x09U /*!< SMARTCARD MspDeInit callback ID */ - -} HAL_SMARTCARD_CallbackIDTypeDef; - -/** - * @brief HAL SMARTCARD Callback pointer definition - */ -typedef void (*pSMARTCARD_CallbackTypeDef)(SMARTCARD_HandleTypeDef *hsc); /*!< pointer to an SMARTCARD callback function */ - -#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup SMARTCARD_Exported_Constants SMARTCARD Exported constants - * @{ - */ - -/** @defgroup SMARTCARD_Error_Code SMARTCARD Error Code - * @{ - */ -#define HAL_SMARTCARD_ERROR_NONE 0x00000000U /*!< No error */ -#define HAL_SMARTCARD_ERROR_PE 0x00000001U /*!< Parity error */ -#define HAL_SMARTCARD_ERROR_NE 0x00000002U /*!< Noise error */ -#define HAL_SMARTCARD_ERROR_FE 0x00000004U /*!< Frame error */ -#define HAL_SMARTCARD_ERROR_ORE 0x00000008U /*!< Overrun error */ -#define HAL_SMARTCARD_ERROR_DMA 0x00000010U /*!< DMA transfer error */ -#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) -#define HAL_SMARTCARD_ERROR_INVALID_CALLBACK 0x00000020U /*!< Invalid Callback error */ -#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @defgroup SMARTCARD_Word_Length SMARTCARD Word Length - * @{ - */ -#define SMARTCARD_WORDLENGTH_9B ((uint32_t)USART_CR1_M) -/** - * @} - */ - -/** @defgroup SMARTCARD_Stop_Bits SMARTCARD Number of Stop Bits - * @{ - */ -#define SMARTCARD_STOPBITS_0_5 ((uint32_t)USART_CR2_STOP_0) -#define SMARTCARD_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1)) -/** - * @} - */ - -/** @defgroup SMARTCARD_Parity SMARTCARD Parity - * @{ - */ -#define SMARTCARD_PARITY_EVEN ((uint32_t)USART_CR1_PCE) -#define SMARTCARD_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) -/** - * @} - */ - -/** @defgroup SMARTCARD_Mode SMARTCARD Mode - * @{ - */ -#define SMARTCARD_MODE_RX ((uint32_t)USART_CR1_RE) -#define SMARTCARD_MODE_TX ((uint32_t)USART_CR1_TE) -#define SMARTCARD_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE)) -/** - * @} - */ - -/** @defgroup SMARTCARD_Clock_Polarity SMARTCARD Clock Polarity - * @{ - */ -#define SMARTCARD_POLARITY_LOW 0x00000000U -#define SMARTCARD_POLARITY_HIGH ((uint32_t)USART_CR2_CPOL) -/** - * @} - */ - -/** @defgroup SMARTCARD_Clock_Phase SMARTCARD Clock Phase - * @{ - */ -#define SMARTCARD_PHASE_1EDGE 0x00000000U -#define SMARTCARD_PHASE_2EDGE ((uint32_t)USART_CR2_CPHA) -/** - * @} - */ - -/** @defgroup SMARTCARD_Last_Bit SMARTCARD Last Bit - * @{ - */ -#define SMARTCARD_LASTBIT_DISABLE 0x00000000U -#define SMARTCARD_LASTBIT_ENABLE ((uint32_t)USART_CR2_LBCL) -/** - * @} - */ - -/** @defgroup SMARTCARD_NACK_State SMARTCARD NACK State - * @{ - */ -#define SMARTCARD_NACK_ENABLE ((uint32_t)USART_CR3_NACK) -#define SMARTCARD_NACK_DISABLE 0x00000000U -/** - * @} - */ - -/** @defgroup SMARTCARD_DMA_Requests SMARTCARD DMA requests - * @{ - */ -#define SMARTCARD_DMAREQ_TX ((uint32_t)USART_CR3_DMAT) -#define SMARTCARD_DMAREQ_RX ((uint32_t)USART_CR3_DMAR) -/** - * @} - */ - -/** @defgroup SMARTCARD_Prescaler SMARTCARD Prescaler - * @{ - */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV2 0x00000001U /*!< SYSCLK divided by 2 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV4 0x00000002U /*!< SYSCLK divided by 4 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV6 0x00000003U /*!< SYSCLK divided by 6 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV8 0x00000004U /*!< SYSCLK divided by 8 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV10 0x00000005U /*!< SYSCLK divided by 10 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV12 0x00000006U /*!< SYSCLK divided by 12 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV14 0x00000007U /*!< SYSCLK divided by 14 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV16 0x00000008U /*!< SYSCLK divided by 16 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV18 0x00000009U /*!< SYSCLK divided by 18 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV20 0x0000000AU /*!< SYSCLK divided by 20 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV22 0x0000000BU /*!< SYSCLK divided by 22 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV24 0x0000000CU /*!< SYSCLK divided by 24 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV26 0x0000000DU /*!< SYSCLK divided by 26 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV28 0x0000000EU /*!< SYSCLK divided by 28 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV30 0x0000000FU /*!< SYSCLK divided by 30 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV32 0x00000010U /*!< SYSCLK divided by 32 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV34 0x00000011U /*!< SYSCLK divided by 34 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV36 0x00000012U /*!< SYSCLK divided by 36 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV38 0x00000013U /*!< SYSCLK divided by 38 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV40 0x00000014U /*!< SYSCLK divided by 40 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV42 0x00000015U /*!< SYSCLK divided by 42 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV44 0x00000016U /*!< SYSCLK divided by 44 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV46 0x00000017U /*!< SYSCLK divided by 46 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV48 0x00000018U /*!< SYSCLK divided by 48 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV50 0x00000019U /*!< SYSCLK divided by 50 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV52 0x0000001AU /*!< SYSCLK divided by 52 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV54 0x0000001BU /*!< SYSCLK divided by 54 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV56 0x0000001CU /*!< SYSCLK divided by 56 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV58 0x0000001DU /*!< SYSCLK divided by 58 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV60 0x0000001EU /*!< SYSCLK divided by 60 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV62 0x0000001FU /*!< SYSCLK divided by 62 */ -/** - * @} - */ - -/** @defgroup SmartCard_Flags SMARTCARD Flags - * Elements values convention: 0xXXXX - * - 0xXXXX : Flag mask in the SR register - * @{ - */ -#define SMARTCARD_FLAG_TXE ((uint32_t)USART_SR_TXE) -#define SMARTCARD_FLAG_TC ((uint32_t)USART_SR_TC) -#define SMARTCARD_FLAG_RXNE ((uint32_t)USART_SR_RXNE) -#define SMARTCARD_FLAG_IDLE ((uint32_t)USART_SR_IDLE) -#define SMARTCARD_FLAG_ORE ((uint32_t)USART_SR_ORE) -#define SMARTCARD_FLAG_NE ((uint32_t)USART_SR_NE) -#define SMARTCARD_FLAG_FE ((uint32_t)USART_SR_FE) -#define SMARTCARD_FLAG_PE ((uint32_t)USART_SR_PE) -/** - * @} - */ - -/** @defgroup SmartCard_Interrupt_definition SMARTCARD Interrupts Definition - * Elements values convention: 0xY000XXXX - * - XXXX : Interrupt mask in the Y register - * - Y : Interrupt source register (2bits) - * - 01: CR1 register - * - 11: CR3 register - * @{ - */ -#define SMARTCARD_IT_PE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28U | USART_CR1_PEIE)) -#define SMARTCARD_IT_TXE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28U | USART_CR1_TXEIE)) -#define SMARTCARD_IT_TC ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28U | USART_CR1_TCIE)) -#define SMARTCARD_IT_RXNE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28U | USART_CR1_RXNEIE)) -#define SMARTCARD_IT_IDLE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28U | USART_CR1_IDLEIE)) -#define SMARTCARD_IT_ERR ((uint32_t)(SMARTCARD_CR3_REG_INDEX << 28U | USART_CR3_EIE)) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup SMARTCARD_Exported_Macros SMARTCARD Exported Macros - * @{ - */ - -/** @brief Reset SMARTCARD handle gstate & RxState - * @param __HANDLE__ specifies the SMARTCARD Handle. - * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). - * @retval None - */ -#if USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1 -#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) do{ \ - (__HANDLE__)->gState = HAL_SMARTCARD_STATE_RESET; \ - (__HANDLE__)->RxState = HAL_SMARTCARD_STATE_RESET; \ - (__HANDLE__)->MspInitCallback = NULL; \ - (__HANDLE__)->MspDeInitCallback = NULL; \ - } while(0U) -#else -#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) do{ \ - (__HANDLE__)->gState = HAL_SMARTCARD_STATE_RESET; \ - (__HANDLE__)->RxState = HAL_SMARTCARD_STATE_RESET; \ - } while(0U) -#endif /*USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ - -/** @brief Flush the Smartcard DR register - * @param __HANDLE__ specifies the SMARTCARD Handle. - * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). - * @retval None - */ -#define __HAL_SMARTCARD_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR) - -/** @brief Check whether the specified Smartcard flag is set or not. - * @param __HANDLE__ specifies the SMARTCARD Handle. - * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg SMARTCARD_FLAG_TXE: Transmit data register empty flag - * @arg SMARTCARD_FLAG_TC: Transmission Complete flag - * @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag - * @arg SMARTCARD_FLAG_IDLE: Idle Line detection flag - * @arg SMARTCARD_FLAG_ORE: Overrun Error flag - * @arg SMARTCARD_FLAG_NE: Noise Error flag - * @arg SMARTCARD_FLAG_FE: Framing Error flag - * @arg SMARTCARD_FLAG_PE: Parity Error flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) - -/** @brief Clear the specified Smartcard pending flags. - * @param __HANDLE__ specifies the SMARTCARD Handle. - * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). - * @param __FLAG__ specifies the flag to check. - * This parameter can be any combination of the following values: - * @arg SMARTCARD_FLAG_TC: Transmission Complete flag. - * @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag. - * - * @note PE (Parity error), FE (Framing error), NE (Noise error) and ORE (Overrun - * error) flags are cleared by software sequence: a read operation to - * USART_SR register followed by a read operation to USART_DR register. - * @note RXNE flag can be also cleared by a read to the USART_DR register. - * @note TC flag can be also cleared by software sequence: a read operation to - * USART_SR register followed by a write operation to USART_DR register. - * @note TXE flag is cleared only by a write to the USART_DR register. - * @retval None - */ -#define __HAL_SMARTCARD_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) - -/** @brief Clear the SMARTCARD PE pending flag. - * @param __HANDLE__ specifies the USART Handle. - * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). - * @retval None - */ -#define __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) \ - do{ \ - __IO uint32_t tmpreg = 0x00U; \ - tmpreg = (__HANDLE__)->Instance->SR; \ - tmpreg = (__HANDLE__)->Instance->DR; \ - UNUSED(tmpreg); \ - } while(0U) - -/** @brief Clear the SMARTCARD FE pending flag. - * @param __HANDLE__ specifies the USART Handle. - * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). - * @retval None - */ -#define __HAL_SMARTCARD_CLEAR_FEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) - -/** @brief Clear the SMARTCARD NE pending flag. - * @param __HANDLE__ specifies the USART Handle. - * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). - * @retval None - */ -#define __HAL_SMARTCARD_CLEAR_NEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) - -/** @brief Clear the SMARTCARD ORE pending flag. - * @param __HANDLE__ specifies the USART Handle. - * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). - * @retval None - */ -#define __HAL_SMARTCARD_CLEAR_OREFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) - -/** @brief Clear the SMARTCARD IDLE pending flag. - * @param __HANDLE__ specifies the USART Handle. - * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). - * @retval None - */ -#define __HAL_SMARTCARD_CLEAR_IDLEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) - -/** @brief Enable the specified SmartCard interrupt. - * @param __HANDLE__ specifies the SMARTCARD Handle. - * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). - * @param __INTERRUPT__ specifies the SMARTCARD interrupt to enable. - * This parameter can be one of the following values: - * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt - * @arg SMARTCARD_IT_TC: Transmission complete interrupt - * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt - * @arg SMARTCARD_IT_IDLE: Idle line detection interrupt - * @arg SMARTCARD_IT_PE: Parity Error interrupt - * @arg SMARTCARD_IT_ERR: Error interrupt(Frame error, noise error, overrun error) - * @retval None - */ -#define __HAL_SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == SMARTCARD_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & SMARTCARD_IT_MASK)): \ - ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & SMARTCARD_IT_MASK))) - -/** @brief Disable the specified SmartCard interrupt. - * @param __HANDLE__ specifies the SMARTCARD Handle. - * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). - * @param __INTERRUPT__ specifies the SMARTCARD interrupt to disable. - * This parameter can be one of the following values: - * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt - * @arg SMARTCARD_IT_TC: Transmission complete interrupt - * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt - * @arg SMARTCARD_IT_IDLE: Idle line detection interrupt - * @arg SMARTCARD_IT_PE: Parity Error interrupt - * @arg SMARTCARD_IT_ERR: Error interrupt(Frame error, noise error, overrun error) - * @retval None - */ -#define __HAL_SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == SMARTCARD_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & SMARTCARD_IT_MASK)): \ - ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & SMARTCARD_IT_MASK))) - -/** @brief Checks whether the specified SmartCard interrupt has occurred or not. - * @param __HANDLE__ specifies the SmartCard Handle. - * @param __IT__ specifies the SMARTCARD interrupt source to check. - * This parameter can be one of the following values: - * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt - * @arg SMARTCARD_IT_TC: Transmission complete interrupt - * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt - * @arg SMARTCARD_IT_IDLE: Idle line detection interrupt - * @arg SMARTCARD_IT_ERR: Error interrupt - * @arg SMARTCARD_IT_PE: Parity Error interrupt - * @retval The new state of __IT__ (TRUE or FALSE). - */ -#define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28U) == SMARTCARD_CR1_REG_INDEX)? (__HANDLE__)->Instance->CR1: (__HANDLE__)->Instance->CR3) & (((uint32_t)(__IT__)) & SMARTCARD_IT_MASK)) - -/** @brief Enable the USART associated to the SMARTCARD Handle - * @param __HANDLE__ specifies the SMARTCARD Handle. - * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). - * @retval None - */ -#define __HAL_SMARTCARD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) - -/** @brief Disable the USART associated to the SMARTCARD Handle - * @param __HANDLE__ specifies the SMARTCARD Handle. - * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). - * @retval None - */ -#define __HAL_SMARTCARD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) - -/** @brief Macros to enable the SmartCard DMA request. - * @param __HANDLE__ specifies the SmartCard Handle. - * @param __REQUEST__ specifies the SmartCard DMA request. - * This parameter can be one of the following values: - * @arg SMARTCARD_DMAREQ_TX: SmartCard DMA transmit request - * @arg SMARTCARD_DMAREQ_RX: SmartCard DMA receive request - * @retval None - */ -#define __HAL_SMARTCARD_DMA_REQUEST_ENABLE(__HANDLE__, __REQUEST__) ((__HANDLE__)->Instance->CR3 |= (__REQUEST__)) - -/** @brief Macros to disable the SmartCard DMA request. - * @param __HANDLE__ specifies the SmartCard Handle. - * @param __REQUEST__ specifies the SmartCard DMA request. - * This parameter can be one of the following values: - * @arg SMARTCARD_DMAREQ_TX: SmartCard DMA transmit request - * @arg SMARTCARD_DMAREQ_RX: SmartCard DMA receive request - * @retval None - */ -#define __HAL_SMARTCARD_DMA_REQUEST_DISABLE(__HANDLE__, __REQUEST__) ((__HANDLE__)->Instance->CR3 &= ~(__REQUEST__)) - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup SMARTCARD_Exported_Functions - * @{ - */ - -/** @addtogroup SMARTCARD_Exported_Functions_Group1 - * @{ - */ -/* Initialization/de-initialization functions **********************************/ -HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsc); -HAL_StatusTypeDef HAL_SMARTCARD_ReInit(SMARTCARD_HandleTypeDef *hsc); -HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsc); -void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsc); -void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsc); -#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) -/* Callbacks Register/UnRegister functions ***********************************/ -HAL_StatusTypeDef HAL_SMARTCARD_RegisterCallback(SMARTCARD_HandleTypeDef *hsc, HAL_SMARTCARD_CallbackIDTypeDef CallbackID, pSMARTCARD_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_SMARTCARD_UnRegisterCallback(SMARTCARD_HandleTypeDef *hsc, HAL_SMARTCARD_CallbackIDTypeDef CallbackID); -#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @addtogroup SMARTCARD_Exported_Functions_Group2 - * @{ - */ -/* IO operation functions *******************************************************/ -HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size); -/* Transfer Abort functions */ -HAL_StatusTypeDef HAL_SMARTCARD_Abort(SMARTCARD_HandleTypeDef *hsc); -HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit(SMARTCARD_HandleTypeDef *hsc); -HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive(SMARTCARD_HandleTypeDef *hsc); -HAL_StatusTypeDef HAL_SMARTCARD_Abort_IT(SMARTCARD_HandleTypeDef *hsc); -HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit_IT(SMARTCARD_HandleTypeDef *hsc); -HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive_IT(SMARTCARD_HandleTypeDef *hsc); - -void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsc); -void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsc); -void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsc); -void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsc); -void HAL_SMARTCARD_AbortCpltCallback(SMARTCARD_HandleTypeDef *hsc); -void HAL_SMARTCARD_AbortTransmitCpltCallback(SMARTCARD_HandleTypeDef *hsc); -void HAL_SMARTCARD_AbortReceiveCpltCallback(SMARTCARD_HandleTypeDef *hsc); -/** - * @} - */ - -/** @addtogroup SMARTCARD_Exported_Functions_Group3 - * @{ - */ -/* Peripheral State functions **************************************************/ -HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsc); -uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsc); -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup SMARTCARD_Private_Constants SMARTCARD Private Constants - * @{ - */ - -/** @brief SMARTCARD interruptions flag mask - * - */ -#define SMARTCARD_IT_MASK ((uint32_t) USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RXNEIE | \ - USART_CR1_IDLEIE | USART_CR3_EIE ) - -#define SMARTCARD_CR1_REG_INDEX 1U -#define SMARTCARD_CR3_REG_INDEX 3U -/** - * @} - */ - -/* Private macros --------------------------------------------------------*/ -/** @defgroup SMARTCARD_Private_Macros SMARTCARD Private Macros - * @{ - */ -#define IS_SMARTCARD_WORD_LENGTH(LENGTH) ((LENGTH) == SMARTCARD_WORDLENGTH_9B) -#define IS_SMARTCARD_STOPBITS(STOPBITS) (((STOPBITS) == SMARTCARD_STOPBITS_0_5) || \ - ((STOPBITS) == SMARTCARD_STOPBITS_1_5)) -#define IS_SMARTCARD_PARITY(PARITY) (((PARITY) == SMARTCARD_PARITY_EVEN) || \ - ((PARITY) == SMARTCARD_PARITY_ODD)) -#define IS_SMARTCARD_MODE(MODE) ((((MODE) & 0x0000FFF3U) == 0x00U) && ((MODE) != 0x000000U)) -#define IS_SMARTCARD_POLARITY(CPOL) (((CPOL) == SMARTCARD_POLARITY_LOW) || ((CPOL) == SMARTCARD_POLARITY_HIGH)) -#define IS_SMARTCARD_PHASE(CPHA) (((CPHA) == SMARTCARD_PHASE_1EDGE) || ((CPHA) == SMARTCARD_PHASE_2EDGE)) -#define IS_SMARTCARD_LASTBIT(LASTBIT) (((LASTBIT) == SMARTCARD_LASTBIT_DISABLE) || \ - ((LASTBIT) == SMARTCARD_LASTBIT_ENABLE)) -#define IS_SMARTCARD_NACK_STATE(NACK) (((NACK) == SMARTCARD_NACK_ENABLE) || \ - ((NACK) == SMARTCARD_NACK_DISABLE)) -#define IS_SMARTCARD_BAUDRATE(BAUDRATE) ((BAUDRATE) < 4500001U) - -#define SMARTCARD_DIV(__PCLK__, __BAUD__) (((__PCLK__)*25U)/(4U*(__BAUD__))) -#define SMARTCARD_DIVMANT(__PCLK__, __BAUD__) (SMARTCARD_DIV((__PCLK__), (__BAUD__))/100U) -#define SMARTCARD_DIVFRAQ(__PCLK__, __BAUD__) (((SMARTCARD_DIV((__PCLK__), (__BAUD__)) - (SMARTCARD_DIVMANT((__PCLK__), (__BAUD__)) * 100U)) * 16U + 50U) / 100U) -/* SMARTCARD BRR = mantissa + overflow + fraction - = (SMARTCARD DIVMANT << 4) + (SMARTCARD DIVFRAQ & 0xF0) + (SMARTCARD DIVFRAQ & 0x0FU) */ -#define SMARTCARD_BRR(__PCLK__, __BAUD__) (((SMARTCARD_DIVMANT((__PCLK__), (__BAUD__)) << 4U) + \ - (SMARTCARD_DIVFRAQ((__PCLK__), (__BAUD__)) & 0xF0U)) + \ - (SMARTCARD_DIVFRAQ((__PCLK__), (__BAUD__)) & 0x0FU)) - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup SMARTCARD_Private_Functions SMARTCARD Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F1xx_HAL_SMARTCARD_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit v1.2.3-70-g09d2