From 664c869f7749da96bbea7307beb043dfe52593c5 Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Sun, 28 Jul 2019 23:23:18 -0400 Subject: lib: Remove unused stm32f1 "hal" code Now that the stm32f1 code has been merged into the stm32 code, there is no longer a need to use the upstream stm32f1 "hal" code. Signed-off-by: Kevin O'Connor --- lib/stm32f1/hal/include/stm32f1xx_hal_sd.h | 762 ----------------------------- 1 file changed, 762 deletions(-) delete mode 100644 lib/stm32f1/hal/include/stm32f1xx_hal_sd.h (limited to 'lib/stm32f1/hal/include/stm32f1xx_hal_sd.h') diff --git a/lib/stm32f1/hal/include/stm32f1xx_hal_sd.h b/lib/stm32f1/hal/include/stm32f1xx_hal_sd.h deleted file mode 100644 index c9503881..00000000 --- a/lib/stm32f1/hal/include/stm32f1xx_hal_sd.h +++ /dev/null @@ -1,762 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_sd.h - * @author MCD Application Team - * @brief Header file of SD HAL module. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2018 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef STM32F1xx_HAL_SD_H -#define STM32F1xx_HAL_SD_H - -#ifdef __cplusplus - extern "C" { -#endif - -#if defined(SDIO) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_ll_sdmmc.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - -/** @defgroup SD SD - * @brief SD HAL module driver - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup SD_Exported_Types SD Exported Types - * @{ - */ - -/** @defgroup SD_Exported_Types_Group1 SD State enumeration structure - * @{ - */ -typedef enum -{ - HAL_SD_STATE_RESET = ((uint32_t)0x00000000U), /*!< SD not yet initialized or disabled */ - HAL_SD_STATE_READY = ((uint32_t)0x00000001U), /*!< SD initialized and ready for use */ - HAL_SD_STATE_TIMEOUT = ((uint32_t)0x00000002U), /*!< SD Timeout state */ - HAL_SD_STATE_BUSY = ((uint32_t)0x00000003U), /*!< SD process ongoing */ - HAL_SD_STATE_PROGRAMMING = ((uint32_t)0x00000004U), /*!< SD Programming State */ - HAL_SD_STATE_RECEIVING = ((uint32_t)0x00000005U), /*!< SD Receiving State */ - HAL_SD_STATE_TRANSFER = ((uint32_t)0x00000006U), /*!< SD Transfert State */ - HAL_SD_STATE_ERROR = ((uint32_t)0x0000000FU) /*!< SD is in error state */ -}HAL_SD_StateTypeDef; -/** - * @} - */ - -/** @defgroup SD_Exported_Types_Group2 SD Card State enumeration structure - * @{ - */ -typedef uint32_t HAL_SD_CardStateTypeDef; - -#define HAL_SD_CARD_READY 0x00000001U /*!< Card state is ready */ -#define HAL_SD_CARD_IDENTIFICATION 0x00000002U /*!< Card is in identification state */ -#define HAL_SD_CARD_STANDBY 0x00000003U /*!< Card is in standby state */ -#define HAL_SD_CARD_TRANSFER 0x00000004U /*!< Card is in transfer state */ -#define HAL_SD_CARD_SENDING 0x00000005U /*!< Card is sending an operation */ -#define HAL_SD_CARD_RECEIVING 0x00000006U /*!< Card is receiving operation information */ -#define HAL_SD_CARD_PROGRAMMING 0x00000007U /*!< Card is in programming state */ -#define HAL_SD_CARD_DISCONNECTED 0x00000008U /*!< Card is disconnected */ -#define HAL_SD_CARD_ERROR 0x000000FFU /*!< Card response Error */ -/** - * @} - */ - -/** @defgroup SD_Exported_Types_Group3 SD Handle Structure definition - * @{ - */ -#define SD_InitTypeDef SDIO_InitTypeDef -#define SD_TypeDef SDIO_TypeDef - -/** - * @brief SD Card Information Structure definition - */ -typedef struct -{ - uint32_t CardType; /*!< Specifies the card Type */ - - uint32_t CardVersion; /*!< Specifies the card version */ - - uint32_t Class; /*!< Specifies the class of the card class */ - - uint32_t RelCardAdd; /*!< Specifies the Relative Card Address */ - - uint32_t BlockNbr; /*!< Specifies the Card Capacity in blocks */ - - uint32_t BlockSize; /*!< Specifies one block size in bytes */ - - uint32_t LogBlockNbr; /*!< Specifies the Card logical Capacity in blocks */ - - uint32_t LogBlockSize; /*!< Specifies logical block size in bytes */ - -}HAL_SD_CardInfoTypeDef; - -/** - * @brief SD handle Structure definition - */ -#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) -typedef struct __SD_HandleTypeDef -#else -typedef struct -#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ -{ - SD_TypeDef *Instance; /*!< SD registers base address */ - - SD_InitTypeDef Init; /*!< SD required parameters */ - - HAL_LockTypeDef Lock; /*!< SD locking object */ - - uint8_t *pTxBuffPtr; /*!< Pointer to SD Tx transfer Buffer */ - - uint32_t TxXferSize; /*!< SD Tx Transfer size */ - - uint8_t *pRxBuffPtr; /*!< Pointer to SD Rx transfer Buffer */ - - uint32_t RxXferSize; /*!< SD Rx Transfer size */ - - __IO uint32_t Context; /*!< SD transfer context */ - - __IO HAL_SD_StateTypeDef State; /*!< SD card State */ - - __IO uint32_t ErrorCode; /*!< SD Card Error codes */ - - DMA_HandleTypeDef *hdmatx; /*!< SD Tx DMA handle parameters */ - - DMA_HandleTypeDef *hdmarx; /*!< SD Rx DMA handle parameters */ - - HAL_SD_CardInfoTypeDef SdCard; /*!< SD Card information */ - - uint32_t CSD[4]; /*!< SD card specific data table */ - - uint32_t CID[4]; /*!< SD card identification number table */ - -#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) - void (* TxCpltCallback) (struct __SD_HandleTypeDef *hsd); - void (* RxCpltCallback) (struct __SD_HandleTypeDef *hsd); - void (* ErrorCallback) (struct __SD_HandleTypeDef *hsd); - void (* AbortCpltCallback) (struct __SD_HandleTypeDef *hsd); - - void (* MspInitCallback) (struct __SD_HandleTypeDef *hsd); - void (* MspDeInitCallback) (struct __SD_HandleTypeDef *hsd); -#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ -}SD_HandleTypeDef; - -/** - * @} - */ - -/** @defgroup SD_Exported_Types_Group4 Card Specific Data: CSD Register - * @{ - */ -typedef struct -{ - __IO uint8_t CSDStruct; /*!< CSD structure */ - __IO uint8_t SysSpecVersion; /*!< System specification version */ - __IO uint8_t Reserved1; /*!< Reserved */ - __IO uint8_t TAAC; /*!< Data read access time 1 */ - __IO uint8_t NSAC; /*!< Data read access time 2 in CLK cycles */ - __IO uint8_t MaxBusClkFrec; /*!< Max. bus clock frequency */ - __IO uint16_t CardComdClasses; /*!< Card command classes */ - __IO uint8_t RdBlockLen; /*!< Max. read data block length */ - __IO uint8_t PartBlockRead; /*!< Partial blocks for read allowed */ - __IO uint8_t WrBlockMisalign; /*!< Write block misalignment */ - __IO uint8_t RdBlockMisalign; /*!< Read block misalignment */ - __IO uint8_t DSRImpl; /*!< DSR implemented */ - __IO uint8_t Reserved2; /*!< Reserved */ - __IO uint32_t DeviceSize; /*!< Device Size */ - __IO uint8_t MaxRdCurrentVDDMin; /*!< Max. read current @ VDD min */ - __IO uint8_t MaxRdCurrentVDDMax; /*!< Max. read current @ VDD max */ - __IO uint8_t MaxWrCurrentVDDMin; /*!< Max. write current @ VDD min */ - __IO uint8_t MaxWrCurrentVDDMax; /*!< Max. write current @ VDD max */ - __IO uint8_t DeviceSizeMul; /*!< Device size multiplier */ - __IO uint8_t EraseGrSize; /*!< Erase group size */ - __IO uint8_t EraseGrMul; /*!< Erase group size multiplier */ - __IO uint8_t WrProtectGrSize; /*!< Write protect group size */ - __IO uint8_t WrProtectGrEnable; /*!< Write protect group enable */ - __IO uint8_t ManDeflECC; /*!< Manufacturer default ECC */ - __IO uint8_t WrSpeedFact; /*!< Write speed factor */ - __IO uint8_t MaxWrBlockLen; /*!< Max. write data block length */ - __IO uint8_t WriteBlockPaPartial; /*!< Partial blocks for write allowed */ - __IO uint8_t Reserved3; /*!< Reserved */ - __IO uint8_t ContentProtectAppli; /*!< Content protection application */ - __IO uint8_t FileFormatGroup; /*!< File format group */ - __IO uint8_t CopyFlag; /*!< Copy flag (OTP) */ - __IO uint8_t PermWrProtect; /*!< Permanent write protection */ - __IO uint8_t TempWrProtect; /*!< Temporary write protection */ - __IO uint8_t FileFormat; /*!< File format */ - __IO uint8_t ECC; /*!< ECC code */ - __IO uint8_t CSD_CRC; /*!< CSD CRC */ - __IO uint8_t Reserved4; /*!< Always 1 */ -}HAL_SD_CardCSDTypeDef; -/** - * @} - */ - -/** @defgroup SD_Exported_Types_Group5 Card Identification Data: CID Register - * @{ - */ -typedef struct -{ - __IO uint8_t ManufacturerID; /*!< Manufacturer ID */ - __IO uint16_t OEM_AppliID; /*!< OEM/Application ID */ - __IO uint32_t ProdName1; /*!< Product Name part1 */ - __IO uint8_t ProdName2; /*!< Product Name part2 */ - __IO uint8_t ProdRev; /*!< Product Revision */ - __IO uint32_t ProdSN; /*!< Product Serial Number */ - __IO uint8_t Reserved1; /*!< Reserved1 */ - __IO uint16_t ManufactDate; /*!< Manufacturing Date */ - __IO uint8_t CID_CRC; /*!< CID CRC */ - __IO uint8_t Reserved2; /*!< Always 1 */ - -}HAL_SD_CardCIDTypeDef; -/** - * @} - */ - -/** @defgroup SD_Exported_Types_Group6 SD Card Status returned by ACMD13 - * @{ - */ -typedef struct -{ - __IO uint8_t DataBusWidth; /*!< Shows the currently defined data bus width */ - __IO uint8_t SecuredMode; /*!< Card is in secured mode of operation */ - __IO uint16_t CardType; /*!< Carries information about card type */ - __IO uint32_t ProtectedAreaSize; /*!< Carries information about the capacity of protected area */ - __IO uint8_t SpeedClass; /*!< Carries information about the speed class of the card */ - __IO uint8_t PerformanceMove; /*!< Carries information about the card's performance move */ - __IO uint8_t AllocationUnitSize; /*!< Carries information about the card's allocation unit size */ - __IO uint16_t EraseSize; /*!< Determines the number of AUs to be erased in one operation */ - __IO uint8_t EraseTimeout; /*!< Determines the timeout for any number of AU erase */ - __IO uint8_t EraseOffset; /*!< Carries information about the erase offset */ - -}HAL_SD_CardStatusTypeDef; -/** - * @} - */ - -#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) -/** @defgroup SD_Exported_Types_Group7 SD Callback ID enumeration definition - * @{ - */ -typedef enum -{ - HAL_SD_TX_CPLT_CB_ID = 0x00U, /*!< SD Tx Complete Callback ID */ - HAL_SD_RX_CPLT_CB_ID = 0x01U, /*!< SD Rx Complete Callback ID */ - HAL_SD_ERROR_CB_ID = 0x02U, /*!< SD Error Callback ID */ - HAL_SD_ABORT_CB_ID = 0x03U, /*!< SD Abort Callback ID */ - - HAL_SD_MSP_INIT_CB_ID = 0x10U, /*!< SD MspInit Callback ID */ - HAL_SD_MSP_DEINIT_CB_ID = 0x11U /*!< SD MspDeInit Callback ID */ -}HAL_SD_CallbackIDTypeDef; -/** - * @} - */ - -/** @defgroup SD_Exported_Types_Group8 SD Callback pointer definition - * @{ - */ -typedef void (*pSD_CallbackTypeDef) (SD_HandleTypeDef *hsd); -/** - * @} - */ -#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup SD_Exported_Constants Exported Constants - * @{ - */ - -#define BLOCKSIZE ((uint32_t)512U) /*!< Block size is 512 bytes */ - -/** @defgroup SD_Exported_Constansts_Group1 SD Error status enumeration Structure definition - * @{ - */ -#define HAL_SD_ERROR_NONE SDMMC_ERROR_NONE /*!< No error */ -#define HAL_SD_ERROR_CMD_CRC_FAIL SDMMC_ERROR_CMD_CRC_FAIL /*!< Command response received (but CRC check failed) */ -#define HAL_SD_ERROR_DATA_CRC_FAIL SDMMC_ERROR_DATA_CRC_FAIL /*!< Data block sent/received (CRC check failed) */ -#define HAL_SD_ERROR_CMD_RSP_TIMEOUT SDMMC_ERROR_CMD_RSP_TIMEOUT /*!< Command response timeout */ -#define HAL_SD_ERROR_DATA_TIMEOUT SDMMC_ERROR_DATA_TIMEOUT /*!< Data timeout */ -#define HAL_SD_ERROR_TX_UNDERRUN SDMMC_ERROR_TX_UNDERRUN /*!< Transmit FIFO underrun */ -#define HAL_SD_ERROR_RX_OVERRUN SDMMC_ERROR_RX_OVERRUN /*!< Receive FIFO overrun */ -#define HAL_SD_ERROR_ADDR_MISALIGNED SDMMC_ERROR_ADDR_MISALIGNED /*!< Misaligned address */ -#define HAL_SD_ERROR_BLOCK_LEN_ERR SDMMC_ERROR_BLOCK_LEN_ERR /*!< Transferred block length is not allowed for the card or the - number of transferred bytes does not match the block length */ -#define HAL_SD_ERROR_ERASE_SEQ_ERR SDMMC_ERROR_ERASE_SEQ_ERR /*!< An error in the sequence of erase command occurs */ -#define HAL_SD_ERROR_BAD_ERASE_PARAM SDMMC_ERROR_BAD_ERASE_PARAM /*!< An invalid selection for erase groups */ -#define HAL_SD_ERROR_WRITE_PROT_VIOLATION SDMMC_ERROR_WRITE_PROT_VIOLATION /*!< Attempt to program a write protect block */ -#define HAL_SD_ERROR_LOCK_UNLOCK_FAILED SDMMC_ERROR_LOCK_UNLOCK_FAILED /*!< Sequence or password error has been detected in unlock - command or if there was an attempt to access a locked card */ -#define HAL_SD_ERROR_COM_CRC_FAILED SDMMC_ERROR_COM_CRC_FAILED /*!< CRC check of the previous command failed */ -#define HAL_SD_ERROR_ILLEGAL_CMD SDMMC_ERROR_ILLEGAL_CMD /*!< Command is not legal for the card state */ -#define HAL_SD_ERROR_CARD_ECC_FAILED SDMMC_ERROR_CARD_ECC_FAILED /*!< Card internal ECC was applied but failed to correct the data */ -#define HAL_SD_ERROR_CC_ERR SDMMC_ERROR_CC_ERR /*!< Internal card controller error */ -#define HAL_SD_ERROR_GENERAL_UNKNOWN_ERR SDMMC_ERROR_GENERAL_UNKNOWN_ERR /*!< General or unknown error */ -#define HAL_SD_ERROR_STREAM_READ_UNDERRUN SDMMC_ERROR_STREAM_READ_UNDERRUN /*!< The card could not sustain data reading in stream rmode */ -#define HAL_SD_ERROR_STREAM_WRITE_OVERRUN SDMMC_ERROR_STREAM_WRITE_OVERRUN /*!< The card could not sustain data programming in stream mode */ -#define HAL_SD_ERROR_CID_CSD_OVERWRITE SDMMC_ERROR_CID_CSD_OVERWRITE /*!< CID/CSD overwrite error */ -#define HAL_SD_ERROR_WP_ERASE_SKIP SDMMC_ERROR_WP_ERASE_SKIP /*!< Only partial address space was erased */ -#define HAL_SD_ERROR_CARD_ECC_DISABLED SDMMC_ERROR_CARD_ECC_DISABLED /*!< Command has been executed without using internal ECC */ -#define HAL_SD_ERROR_ERASE_RESET SDMMC_ERROR_ERASE_RESET /*!< Erase sequence was cleared before executing because an out - of erase sequence command was received */ -#define HAL_SD_ERROR_AKE_SEQ_ERR SDMMC_ERROR_AKE_SEQ_ERR /*!< Error in sequence of authentication */ -#define HAL_SD_ERROR_INVALID_VOLTRANGE SDMMC_ERROR_INVALID_VOLTRANGE /*!< Error in case of invalid voltage range */ -#define HAL_SD_ERROR_ADDR_OUT_OF_RANGE SDMMC_ERROR_ADDR_OUT_OF_RANGE /*!< Error when addressed block is out of range */ -#define HAL_SD_ERROR_REQUEST_NOT_APPLICABLE SDMMC_ERROR_REQUEST_NOT_APPLICABLE /*!< Error when command request is not applicable */ -#define HAL_SD_ERROR_PARAM SDMMC_ERROR_INVALID_PARAMETER /*!< the used parameter is not valid */ -#define HAL_SD_ERROR_UNSUPPORTED_FEATURE SDMMC_ERROR_UNSUPPORTED_FEATURE /*!< Error when feature is not insupported */ -#define HAL_SD_ERROR_BUSY SDMMC_ERROR_BUSY /*!< Error when transfer process is busy */ -#define HAL_SD_ERROR_DMA SDMMC_ERROR_DMA /*!< Error while DMA transfer */ -#define HAL_SD_ERROR_TIMEOUT SDMMC_ERROR_TIMEOUT /*!< Timeout error */ - -#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) -#define HAL_SD_ERROR_INVALID_CALLBACK SDMMC_ERROR_INVALID_PARAMETER /*!< Invalid callback error */ -#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ -/** - * @} - */ - -/** @defgroup SD_Exported_Constansts_Group2 SD context enumeration - * @{ - */ -#define SD_CONTEXT_NONE ((uint32_t)0x00000000U) /*!< None */ -#define SD_CONTEXT_READ_SINGLE_BLOCK ((uint32_t)0x00000001U) /*!< Read single block operation */ -#define SD_CONTEXT_READ_MULTIPLE_BLOCK ((uint32_t)0x00000002U) /*!< Read multiple blocks operation */ -#define SD_CONTEXT_WRITE_SINGLE_BLOCK ((uint32_t)0x00000010U) /*!< Write single block operation */ -#define SD_CONTEXT_WRITE_MULTIPLE_BLOCK ((uint32_t)0x00000020U) /*!< Write multiple blocks operation */ -#define SD_CONTEXT_IT ((uint32_t)0x00000008U) /*!< Process in Interrupt mode */ -#define SD_CONTEXT_DMA ((uint32_t)0x00000080U) /*!< Process in DMA mode */ - -/** - * @} - */ - -/** @defgroup SD_Exported_Constansts_Group3 SD Supported Memory Cards - * @{ - */ -#define CARD_SDSC ((uint32_t)0x00000000U) /*!< SD Standard Capacity <2Go */ -#define CARD_SDHC_SDXC ((uint32_t)0x00000001U) /*!< SD High Capacity <32Go, SD Extended Capacity <2To */ -#define CARD_SECURED ((uint32_t)0x00000003U) - -/** - * @} - */ - -/** @defgroup SD_Exported_Constansts_Group4 SD Supported Version - * @{ - */ -#define CARD_V1_X ((uint32_t)0x00000000U) -#define CARD_V2_X ((uint32_t)0x00000001U) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup SD_Exported_macros SD Exported Macros - * @brief macros to handle interrupts and specific clock configurations - * @{ - */ -/** @brief Reset SD handle state. - * @param __HANDLE__ : SD handle. - * @retval None - */ -#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) -#define __HAL_SD_RESET_HANDLE_STATE(__HANDLE__) do { \ - (__HANDLE__)->State = HAL_SD_STATE_RESET; \ - (__HANDLE__)->MspInitCallback = NULL; \ - (__HANDLE__)->MspDeInitCallback = NULL; \ - } while(0) -#else -#define __HAL_SD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SD_STATE_RESET) -#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ - -/** - * @brief Enable the SD device. - * @retval None - */ -#define __HAL_SD_ENABLE(__HANDLE__) __SDIO_ENABLE((__HANDLE__)->Instance) - -/** - * @brief Disable the SD device. - * @retval None - */ -#define __HAL_SD_DISABLE(__HANDLE__) __SDIO_DISABLE((__HANDLE__)->Instance) - -/** - * @brief Enable the SDMMC DMA transfer. - * @retval None - */ -#define __HAL_SD_DMA_ENABLE(__HANDLE__) __SDIO_DMA_ENABLE((__HANDLE__)->Instance) - -/** - * @brief Disable the SDMMC DMA transfer. - * @retval None - */ -#define __HAL_SD_DMA_DISABLE(__HANDLE__) __SDIO_DMA_DISABLE((__HANDLE__)->Instance) - -/** - * @brief Enable the SD device interrupt. - * @param __HANDLE__: SD Handle - * @param __INTERRUPT__: specifies the SDMMC interrupt sources to be enabled. - * This parameter can be one or a combination of the following values: - * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt - * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt - * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt - * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt - * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt - * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt - * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt - * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt - * @arg SDIO_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt - * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt - * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt - * @arg SDIO_IT_TXACT: Data transmit in progress interrupt - * @arg SDIO_IT_RXACT: Data receive in progress interrupt - * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt - * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt - * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt - * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt - * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt - * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt - * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt - * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt - * @arg SDIO_IT_SDIOIT: SDIO interrupt received interrupt - * @retval None - */ -#define __HAL_SD_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__)) - -/** - * @brief Disable the SD device interrupt. - * @param __HANDLE__: SD Handle - * @param __INTERRUPT__: specifies the SDMMC interrupt sources to be disabled. - * This parameter can be one or a combination of the following values: - * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt - * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt - * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt - * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt - * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt - * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt - * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt - * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt - * @arg SDIO_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt - * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt - * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt - * @arg SDIO_IT_TXACT: Data transmit in progress interrupt - * @arg SDIO_IT_RXACT: Data receive in progress interrupt - * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt - * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt - * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt - * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt - * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt - * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt - * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt - * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt - * @arg SDIO_IT_SDIOIT: SDIO interrupt received interrupt - * @retval None - */ -#define __HAL_SD_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__)) - -/** - * @brief Check whether the specified SD flag is set or not. - * @param __HANDLE__: SD Handle - * @param __FLAG__: specifies the flag to check. - * This parameter can be one of the following values: - * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) - * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) - * @arg SDIO_FLAG_CTIMEOUT: Command response timeout - * @arg SDIO_FLAG_DTIMEOUT: Data timeout - * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error - * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error - * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) - * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) - * @arg SDIO_FLAG_DATAEND: Data end (data counter, DATACOUNT, is zero) - * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) - * @arg SDIO_FLAG_CMDACT: Command transfer in progress - * @arg SDIO_FLAG_TXACT: Data transmit in progress - * @arg SDIO_FLAG_RXACT: Data receive in progress - * @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty - * @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full - * @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full - * @arg SDIO_FLAG_RXFIFOF: Receive FIFO full - * @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty - * @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty - * @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO - * @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO - * @arg SDIO_FLAG_SDIOIT: SDIO interrupt received - * @retval The new state of SD FLAG (SET or RESET). - */ -#define __HAL_SD_GET_FLAG(__HANDLE__, __FLAG__) __SDIO_GET_FLAG((__HANDLE__)->Instance, (__FLAG__)) - -/** - * @brief Clear the SD's pending flags. - * @param __HANDLE__: SD Handle - * @param __FLAG__: specifies the flag to clear. - * This parameter can be one or a combination of the following values: - * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) - * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) - * @arg SDIO_FLAG_CTIMEOUT: Command response timeout - * @arg SDIO_FLAG_DTIMEOUT: Data timeout - * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error - * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error - * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) - * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) - * @arg SDIO_FLAG_DATAEND: Data end (data counter, DATACOUNT, is zero) - * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) - * @arg SDIO_FLAG_SDIOIT: SDIO interrupt received - * @retval None - */ -#define __HAL_SD_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDIO_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__)) - -/** - * @brief Check whether the specified SD interrupt has occurred or not. - * @param __HANDLE__: SD Handle - * @param __INTERRUPT__: specifies the SDMMC interrupt source to check. - * This parameter can be one of the following values: - * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt - * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt - * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt - * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt - * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt - * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt - * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt - * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt - * @arg SDIO_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt - * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt - * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt - * @arg SDIO_IT_TXACT: Data transmit in progress interrupt - * @arg SDIO_IT_RXACT: Data receive in progress interrupt - * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt - * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt - * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt - * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt - * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt - * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt - * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt - * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt - * @arg SDIO_IT_SDIOIT: SDIO interrupt received interrupt - * @retval The new state of SD IT (SET or RESET). - */ -#define __HAL_SD_GET_IT(__HANDLE__, __INTERRUPT__) __SDIO_GET_IT((__HANDLE__)->Instance, (__INTERRUPT__)) - -/** - * @brief Clear the SD's interrupt pending bits. - * @param __HANDLE__: SD Handle - * @param __INTERRUPT__: specifies the interrupt pending bit to clear. - * This parameter can be one or a combination of the following values: - * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt - * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt - * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt - * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt - * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt - * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt - * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt - * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt - * @arg SDIO_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt - * @arg SDIO_IT_SDIOIT: SDIO interrupt received interrupt - * @retval None - */ -#define __HAL_SD_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDIO_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__)) - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup SD_Exported_Functions SD Exported Functions - * @{ - */ - -/** @defgroup SD_Exported_Functions_Group1 Initialization and de-initialization functions - * @{ - */ -HAL_StatusTypeDef HAL_SD_Init(SD_HandleTypeDef *hsd); -HAL_StatusTypeDef HAL_SD_InitCard(SD_HandleTypeDef *hsd); -HAL_StatusTypeDef HAL_SD_DeInit (SD_HandleTypeDef *hsd); -void HAL_SD_MspInit(SD_HandleTypeDef *hsd); -void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd); -/** - * @} - */ - -/** @defgroup SD_Exported_Functions_Group2 Input and Output operation functions - * @{ - */ -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_SD_ReadBlocks(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout); -HAL_StatusTypeDef HAL_SD_WriteBlocks(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout); -HAL_StatusTypeDef HAL_SD_Erase(SD_HandleTypeDef *hsd, uint32_t BlockStartAdd, uint32_t BlockEndAdd); -/* Non-Blocking mode: IT */ -HAL_StatusTypeDef HAL_SD_ReadBlocks_IT(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks); -HAL_StatusTypeDef HAL_SD_WriteBlocks_IT(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks); -HAL_StatusTypeDef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks); - -void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd); - -/* Callback in non blocking modes (DMA) */ -void HAL_SD_TxCpltCallback(SD_HandleTypeDef *hsd); -void HAL_SD_RxCpltCallback(SD_HandleTypeDef *hsd); -void HAL_SD_ErrorCallback(SD_HandleTypeDef *hsd); -void HAL_SD_AbortCallback(SD_HandleTypeDef *hsd); - -#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U) -/* SD callback registering/unregistering */ -HAL_StatusTypeDef HAL_SD_RegisterCallback (SD_HandleTypeDef *hsd, HAL_SD_CallbackIDTypeDef CallbackId, pSD_CallbackTypeDef pCallback); -HAL_StatusTypeDef HAL_SD_UnRegisterCallback(SD_HandleTypeDef *hsd, HAL_SD_CallbackIDTypeDef CallbackId); -#endif /* USE_HAL_SD_REGISTER_CALLBACKS */ - -/** - * @} - */ - -/** @defgroup SD_Exported_Functions_Group3 Peripheral Control functions - * @{ - */ -HAL_StatusTypeDef HAL_SD_ConfigWideBusOperation(SD_HandleTypeDef *hsd, uint32_t WideMode); -HAL_StatusTypeDef HAL_SD_ConfigSpeedBusOperation(SD_HandleTypeDef *hsd, uint32_t SpeedMode); -/** - * @} - */ - -/** @defgroup SD_Exported_Functions_Group4 SD card related functions - * @{ - */ -HAL_StatusTypeDef HAL_SD_SendSDStatus(SD_HandleTypeDef *hsd, uint32_t *pSDstatus); -HAL_SD_CardStateTypeDef HAL_SD_GetCardState(SD_HandleTypeDef *hsd); -HAL_StatusTypeDef HAL_SD_GetCardCID(SD_HandleTypeDef *hsd, HAL_SD_CardCIDTypeDef *pCID); -HAL_StatusTypeDef HAL_SD_GetCardCSD(SD_HandleTypeDef *hsd, HAL_SD_CardCSDTypeDef *pCSD); -HAL_StatusTypeDef HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypeDef *pStatus); -HAL_StatusTypeDef HAL_SD_GetCardInfo(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypeDef *pCardInfo); -/** - * @} - */ - -/** @defgroup SD_Exported_Functions_Group5 Peripheral State and Errors functions - * @{ - */ -HAL_SD_StateTypeDef HAL_SD_GetState(SD_HandleTypeDef *hsd); -uint32_t HAL_SD_GetError(SD_HandleTypeDef *hsd); -/** - * @} - */ - -/** @defgroup SD_Exported_Functions_Group6 Perioheral Abort management - * @{ - */ -HAL_StatusTypeDef HAL_SD_Abort(SD_HandleTypeDef *hsd); -HAL_StatusTypeDef HAL_SD_Abort_IT(SD_HandleTypeDef *hsd); -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/** @defgroup SD_Private_Types SD Private Types - * @{ - */ - -/** - * @} - */ - -/* Private defines -----------------------------------------------------------*/ -/** @defgroup SD_Private_Defines SD Private Defines - * @{ - */ - -/** - * @} - */ - -/* Private variables ---------------------------------------------------------*/ -/** @defgroup SD_Private_Variables SD Private Variables - * @{ - */ - -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup SD_Private_Constants SD Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup SD_Private_Macros SD Private Macros - * @{ - */ - -/** - * @} - */ - -/* Private functions prototypes ----------------------------------------------*/ -/** @defgroup SD_Private_Functions_Prototypes SD Private Functions Prototypes - * @{ - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup SD_Private_Functions SD Private Functions - * @{ - */ - -/** - * @} - */ - - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* SDIO */ - -#ifdef __cplusplus -} -#endif - - -#endif /* STM32F1xx_HAL_SD_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit v1.2.3-70-g09d2