From 664c869f7749da96bbea7307beb043dfe52593c5 Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Sun, 28 Jul 2019 23:23:18 -0400 Subject: lib: Remove unused stm32f1 "hal" code Now that the stm32f1 code has been merged into the stm32 code, there is no longer a need to use the upstream stm32f1 "hal" code. Signed-off-by: Kevin O'Connor --- lib/stm32f1/hal/include/stm32f1xx_hal_pwr.h | 388 ---------------------------- 1 file changed, 388 deletions(-) delete mode 100644 lib/stm32f1/hal/include/stm32f1xx_hal_pwr.h (limited to 'lib/stm32f1/hal/include/stm32f1xx_hal_pwr.h') diff --git a/lib/stm32f1/hal/include/stm32f1xx_hal_pwr.h b/lib/stm32f1/hal/include/stm32f1xx_hal_pwr.h deleted file mode 100644 index 2b1b4ed2..00000000 --- a/lib/stm32f1/hal/include/stm32f1xx_hal_pwr.h +++ /dev/null @@ -1,388 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_pwr.h - * @author MCD Application Team - * @brief Header file of PWR HAL module. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F1xx_HAL_PWR_H -#define __STM32F1xx_HAL_PWR_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal_def.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - -/** @addtogroup PWR - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** @defgroup PWR_Exported_Types PWR Exported Types - * @{ - */ - -/** - * @brief PWR PVD configuration structure definition - */ -typedef struct -{ - uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level. - This parameter can be a value of @ref PWR_PVD_detection_level */ - - uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins. - This parameter can be a value of @ref PWR_PVD_Mode */ -}PWR_PVDTypeDef; - - -/** - * @} - */ - - -/* Internal constants --------------------------------------------------------*/ - -/** @addtogroup PWR_Private_Constants - * @{ - */ - -#define PWR_EXTI_LINE_PVD ((uint32_t)0x00010000) /*!< External interrupt line 16 Connected to the PVD EXTI Line */ - -/** - * @} - */ - - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup PWR_Exported_Constants PWR Exported Constants - * @{ - */ - -/** @defgroup PWR_PVD_detection_level PWR PVD detection level - * @{ - */ -#define PWR_PVDLEVEL_0 PWR_CR_PLS_2V2 -#define PWR_PVDLEVEL_1 PWR_CR_PLS_2V3 -#define PWR_PVDLEVEL_2 PWR_CR_PLS_2V4 -#define PWR_PVDLEVEL_3 PWR_CR_PLS_2V5 -#define PWR_PVDLEVEL_4 PWR_CR_PLS_2V6 -#define PWR_PVDLEVEL_5 PWR_CR_PLS_2V7 -#define PWR_PVDLEVEL_6 PWR_CR_PLS_2V8 -#define PWR_PVDLEVEL_7 PWR_CR_PLS_2V9 - -/** - * @} - */ - -/** @defgroup PWR_PVD_Mode PWR PVD Mode - * @{ - */ -#define PWR_PVD_MODE_NORMAL 0x00000000U /*!< basic mode is used */ -#define PWR_PVD_MODE_IT_RISING 0x00010001U /*!< External Interrupt Mode with Rising edge trigger detection */ -#define PWR_PVD_MODE_IT_FALLING 0x00010002U /*!< External Interrupt Mode with Falling edge trigger detection */ -#define PWR_PVD_MODE_IT_RISING_FALLING 0x00010003U /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ -#define PWR_PVD_MODE_EVENT_RISING 0x00020001U /*!< Event Mode with Rising edge trigger detection */ -#define PWR_PVD_MODE_EVENT_FALLING 0x00020002U /*!< Event Mode with Falling edge trigger detection */ -#define PWR_PVD_MODE_EVENT_RISING_FALLING 0x00020003U /*!< Event Mode with Rising/Falling edge trigger detection */ - -/** - * @} - */ - - -/** @defgroup PWR_WakeUp_Pins PWR WakeUp Pins - * @{ - */ - -#define PWR_WAKEUP_PIN1 PWR_CSR_EWUP - -/** - * @} - */ - -/** @defgroup PWR_Regulator_state_in_SLEEP_STOP_mode PWR Regulator state in SLEEP/STOP mode - * @{ - */ -#define PWR_MAINREGULATOR_ON 0x00000000U -#define PWR_LOWPOWERREGULATOR_ON PWR_CR_LPDS - -/** - * @} - */ - -/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry - * @{ - */ -#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01) -#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02) - -/** - * @} - */ - -/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry - * @{ - */ -#define PWR_STOPENTRY_WFI ((uint8_t)0x01) -#define PWR_STOPENTRY_WFE ((uint8_t)0x02) - -/** - * @} - */ - -/** @defgroup PWR_Flag PWR Flag - * @{ - */ -#define PWR_FLAG_WU PWR_CSR_WUF -#define PWR_FLAG_SB PWR_CSR_SBF -#define PWR_FLAG_PVDO PWR_CSR_PVDO - - -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup PWR_Exported_Macros PWR Exported Macros - * @{ - */ - -/** @brief Check PWR flag is set or not. - * @param __FLAG__: specifies the flag to check. - * This parameter can be one of the following values: - * @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event - * was received from the WKUP pin or from the RTC alarm - * An additional wakeup event is detected if the WKUP pin is enabled - * (by setting the EWUP bit) when the WKUP pin level is already high. - * @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was - * resumed from StandBy mode. - * @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled - * by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode - * For this reason, this bit is equal to 0 after Standby or reset - * until the PVDE bit is set. - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__)) - -/** @brief Clear the PWR's pending flags. - * @param __FLAG__: specifies the flag to clear. - * This parameter can be one of the following values: - * @arg PWR_FLAG_WU: Wake Up flag - * @arg PWR_FLAG_SB: StandBy flag - */ -#define __HAL_PWR_CLEAR_FLAG(__FLAG__) SET_BIT(PWR->CR, ((__FLAG__) << 2)) - -/** - * @brief Enable interrupt on PVD Exti Line 16. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR, PWR_EXTI_LINE_PVD) - -/** - * @brief Disable interrupt on PVD Exti Line 16. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR, PWR_EXTI_LINE_PVD) - -/** - * @brief Enable event on PVD Exti Line 16. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR, PWR_EXTI_LINE_PVD) - -/** - * @brief Disable event on PVD Exti Line 16. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR, PWR_EXTI_LINE_PVD) - - -/** - * @brief PVD EXTI line configuration: set falling edge trigger. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD) - - -/** - * @brief Disable the PVD Extended Interrupt Falling Trigger. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD) - - -/** - * @brief PVD EXTI line configuration: set rising edge trigger. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD) - -/** - * @brief Disable the PVD Extended Interrupt Rising Trigger. - * This parameter can be: - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD) - -/** - * @brief PVD EXTI line configuration: set rising & falling edge trigger. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); - -/** - * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger. - * This parameter can be: - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); - - - -/** - * @brief Check whether the specified PVD EXTI interrupt flag is set or not. - * @retval EXTI PVD Line Status. - */ -#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD)) - -/** - * @brief Clear the PVD EXTI flag. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD)) - -/** - * @brief Generate a Software interrupt on selected EXTI line. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER, PWR_EXTI_LINE_PVD) -/** - * @} - */ - -/* Private macro -------------------------------------------------------------*/ -/** @defgroup PWR_Private_Macros PWR Private Macros - * @{ - */ -#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \ - ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \ - ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \ - ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7)) - - -#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \ - ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \ - ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \ - ((MODE) == PWR_PVD_MODE_NORMAL)) - -#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1)) - -#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \ - ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON)) - -#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE)) - -#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE)) - -/** - * @} - */ - - - -/* Exported functions --------------------------------------------------------*/ - -/** @addtogroup PWR_Exported_Functions PWR Exported Functions - * @{ - */ - -/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions - * @{ - */ - -/* Initialization and de-initialization functions *******************************/ -void HAL_PWR_DeInit(void); -void HAL_PWR_EnableBkUpAccess(void); -void HAL_PWR_DisableBkUpAccess(void); - -/** - * @} - */ - -/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions - * @{ - */ - -/* Peripheral Control functions ************************************************/ -void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD); -/* #define HAL_PWR_ConfigPVD 12*/ -void HAL_PWR_EnablePVD(void); -void HAL_PWR_DisablePVD(void); - -/* WakeUp pins configuration functions ****************************************/ -void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx); -void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx); - -/* Low Power modes configuration functions ************************************/ -void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry); -void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry); -void HAL_PWR_EnterSTANDBYMode(void); - -void HAL_PWR_EnableSleepOnExit(void); -void HAL_PWR_DisableSleepOnExit(void); -void HAL_PWR_EnableSEVOnPend(void); -void HAL_PWR_DisableSEVOnPend(void); - - - -void HAL_PWR_PVD_IRQHandler(void); -void HAL_PWR_PVDCallback(void); -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* __STM32F1xx_HAL_PWR_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit v1.2.3-70-g09d2