From 75d57372115eb70ac22d16240c5c887df8ae1da8 Mon Sep 17 00:00:00 2001 From: Grigori Goronzy Date: Sat, 31 Mar 2018 15:34:59 +0200 Subject: Add STM32F103 port Add a fully functional STM32F1 port, currently mostly targeting STM32F103 microcontrollers. This requires an 8 MHz XTAL. The maximum possible step rate is around 282K steps per second. This uses stm32flash to burn the firmware. The bootloader needs to be started by setting BOOT0 to 1 and resetting the MCU. There is no automatic bootloader, unlike on Arduino. Signed-off-by: Grigori Goronzy --- lib/hal-stm32f1/include/stm32f1xx_hal_dma.h | 475 ++++++++++++++++++++++++++++ 1 file changed, 475 insertions(+) create mode 100644 lib/hal-stm32f1/include/stm32f1xx_hal_dma.h (limited to 'lib/hal-stm32f1/include/stm32f1xx_hal_dma.h') diff --git a/lib/hal-stm32f1/include/stm32f1xx_hal_dma.h b/lib/hal-stm32f1/include/stm32f1xx_hal_dma.h new file mode 100644 index 00000000..40274f7a --- /dev/null +++ b/lib/hal-stm32f1/include/stm32f1xx_hal_dma.h @@ -0,0 +1,475 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_dma.h + * @author MCD Application Team + * @version V1.1.1 + * @date 12-May-2017 + * @brief Header file of DMA HAL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2017 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_HAL_DMA_H +#define __STM32F1xx_HAL_DMA_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal_def.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @addtogroup DMA + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Types DMA Exported Types + * @{ + */ + +/** + * @brief DMA Configuration Structure definition + */ +typedef struct +{ + uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, + from memory to memory or from peripheral to memory. + This parameter can be a value of @ref DMA_Data_transfer_direction */ + + uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not. + This parameter can be a value of @ref DMA_Peripheral_incremented_mode */ + + uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not. + This parameter can be a value of @ref DMA_Memory_incremented_mode */ + + uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width. + This parameter can be a value of @ref DMA_Peripheral_data_size */ + + uint32_t MemDataAlignment; /*!< Specifies the Memory data width. + This parameter can be a value of @ref DMA_Memory_data_size */ + + uint32_t Mode; /*!< Specifies the operation mode of the DMAy Channelx. + This parameter can be a value of @ref DMA_mode + @note The circular buffer mode cannot be used if the memory-to-memory + data transfer is configured on the selected Channel */ + + uint32_t Priority; /*!< Specifies the software priority for the DMAy Channelx. + This parameter can be a value of @ref DMA_Priority_level */ +} DMA_InitTypeDef; + +/** + * @brief HAL DMA State structures definition + */ +typedef enum +{ + HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */ + HAL_DMA_STATE_READY = 0x01U, /*!< DMA initialized and ready for use */ + HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */ + HAL_DMA_STATE_TIMEOUT = 0x03U /*!< DMA timeout state */ +}HAL_DMA_StateTypeDef; + +/** + * @brief HAL DMA Error Code structure definition + */ +typedef enum +{ + HAL_DMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */ + HAL_DMA_HALF_TRANSFER = 0x01U /*!< Half Transfer */ +}HAL_DMA_LevelCompleteTypeDef; + +/** + * @brief HAL DMA Callback ID structure definition + */ +typedef enum +{ + HAL_DMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */ + HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01U, /*!< Half transfer */ + HAL_DMA_XFER_ERROR_CB_ID = 0x02U, /*!< Error */ + HAL_DMA_XFER_ABORT_CB_ID = 0x03U, /*!< Abort */ + HAL_DMA_XFER_ALL_CB_ID = 0x04U /*!< All */ + +}HAL_DMA_CallbackIDTypeDef; + +/** + * @brief DMA handle Structure definition + */ +typedef struct __DMA_HandleTypeDef +{ + DMA_Channel_TypeDef *Instance; /*!< Register base address */ + + DMA_InitTypeDef Init; /*!< DMA communication parameters */ + + HAL_LockTypeDef Lock; /*!< DMA locking object */ + + HAL_DMA_StateTypeDef State; /*!< DMA transfer state */ + + void *Parent; /*!< Parent object state */ + + void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */ + + void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */ + + void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */ + + void (* XferAbortCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer abort callback */ + + __IO uint32_t ErrorCode; /*!< DMA Error code */ + + DMA_TypeDef *DmaBaseAddress; /*!< DMA Channel Base Address */ + + uint32_t ChannelIndex; /*!< DMA Channel Index */ + +} DMA_HandleTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Constants DMA Exported Constants + * @{ + */ + +/** @defgroup DMA_Error_Code DMA Error Code + * @{ + */ +#define HAL_DMA_ERROR_NONE 0x00000000U /*!< No error */ +#define HAL_DMA_ERROR_TE 0x00000001U /*!< Transfer error */ +#define HAL_DMA_ERROR_NO_XFER 0x00000004U /*!< no ongoing transfer */ +#define HAL_DMA_ERROR_TIMEOUT 0x00000020U /*!< Timeout error */ +#define HAL_DMA_ERROR_NOT_SUPPORTED 0x00000100U /*!< Not supported mode */ +/** + * @} + */ + +/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction + * @{ + */ +#define DMA_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */ +#define DMA_MEMORY_TO_PERIPH ((uint32_t)DMA_CCR_DIR) /*!< Memory to peripheral direction */ +#define DMA_MEMORY_TO_MEMORY ((uint32_t)DMA_CCR_MEM2MEM) /*!< Memory to memory direction */ + +/** + * @} + */ + +/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode + * @{ + */ +#define DMA_PINC_ENABLE ((uint32_t)DMA_CCR_PINC) /*!< Peripheral increment mode Enable */ +#define DMA_PINC_DISABLE 0x00000000U /*!< Peripheral increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode + * @{ + */ +#define DMA_MINC_ENABLE ((uint32_t)DMA_CCR_MINC) /*!< Memory increment mode Enable */ +#define DMA_MINC_DISABLE 0x00000000U /*!< Memory increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size + * @{ + */ +#define DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment: Byte */ +#define DMA_PDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_PSIZE_0) /*!< Peripheral data alignment: HalfWord */ +#define DMA_PDATAALIGN_WORD ((uint32_t)DMA_CCR_PSIZE_1) /*!< Peripheral data alignment: Word */ +/** + * @} + */ + +/** @defgroup DMA_Memory_data_size DMA Memory data size + * @{ + */ +#define DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment: Byte */ +#define DMA_MDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_MSIZE_0) /*!< Memory data alignment: HalfWord */ +#define DMA_MDATAALIGN_WORD ((uint32_t)DMA_CCR_MSIZE_1) /*!< Memory data alignment: Word */ +/** + * @} + */ + +/** @defgroup DMA_mode DMA mode + * @{ + */ +#define DMA_NORMAL 0x00000000U /*!< Normal mode */ +#define DMA_CIRCULAR ((uint32_t)DMA_CCR_CIRC) /*!< Circular mode */ +/** + * @} + */ + +/** @defgroup DMA_Priority_level DMA Priority level + * @{ + */ +#define DMA_PRIORITY_LOW 0x00000000U /*!< Priority level : Low */ +#define DMA_PRIORITY_MEDIUM ((uint32_t)DMA_CCR_PL_0) /*!< Priority level : Medium */ +#define DMA_PRIORITY_HIGH ((uint32_t)DMA_CCR_PL_1) /*!< Priority level : High */ +#define DMA_PRIORITY_VERY_HIGH ((uint32_t)DMA_CCR_PL) /*!< Priority level : Very_High */ +/** + * @} + */ + + +/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions + * @{ + */ +#define DMA_IT_TC ((uint32_t)DMA_CCR_TCIE) +#define DMA_IT_HT ((uint32_t)DMA_CCR_HTIE) +#define DMA_IT_TE ((uint32_t)DMA_CCR_TEIE) +/** + * @} + */ + +/** @defgroup DMA_flag_definitions DMA flag definitions + * @{ + */ +#define DMA_FLAG_GL1 0x00000001U +#define DMA_FLAG_TC1 0x00000002U +#define DMA_FLAG_HT1 0x00000004U +#define DMA_FLAG_TE1 0x00000008U +#define DMA_FLAG_GL2 0x00000010U +#define DMA_FLAG_TC2 0x00000020U +#define DMA_FLAG_HT2 0x00000040U +#define DMA_FLAG_TE2 0x00000080U +#define DMA_FLAG_GL3 0x00000100U +#define DMA_FLAG_TC3 0x00000200U +#define DMA_FLAG_HT3 0x00000400U +#define DMA_FLAG_TE3 0x00000800U +#define DMA_FLAG_GL4 0x00001000U +#define DMA_FLAG_TC4 0x00002000U +#define DMA_FLAG_HT4 0x00004000U +#define DMA_FLAG_TE4 0x00008000U +#define DMA_FLAG_GL5 0x00010000U +#define DMA_FLAG_TC5 0x00020000U +#define DMA_FLAG_HT5 0x00040000U +#define DMA_FLAG_TE5 0x00080000U +#define DMA_FLAG_GL6 0x00100000U +#define DMA_FLAG_TC6 0x00200000U +#define DMA_FLAG_HT6 0x00400000U +#define DMA_FLAG_TE6 0x00800000U +#define DMA_FLAG_GL7 0x01000000U +#define DMA_FLAG_TC7 0x02000000U +#define DMA_FLAG_HT7 0x04000000U +#define DMA_FLAG_TE7 0x08000000U +/** + * @} + */ + +/** + * @} + */ + + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup DMA_Exported_Macros DMA Exported Macros + * @{ + */ + +/** @brief Reset DMA handle state. + * @param __HANDLE__: DMA handle + * @retval None + */ +#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET) + +/** + * @brief Enable the specified DMA Channel. + * @param __HANDLE__: DMA handle + * @retval None + */ +#define __HAL_DMA_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CCR, DMA_CCR_EN)) + +/** + * @brief Disable the specified DMA Channel. + * @param __HANDLE__: DMA handle + * @retval None + */ +#define __HAL_DMA_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CCR, DMA_CCR_EN)) + + +/* Interrupt & Flag management */ + +/** + * @brief Enables the specified DMA Channel interrupts. + * @param __HANDLE__: DMA handle + * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @retval None + */ +#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (SET_BIT((__HANDLE__)->Instance->CCR, (__INTERRUPT__))) + +/** + * @brief Disable the specified DMA Channel interrupts. + * @param __HANDLE__: DMA handle + * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @retval None + */ +#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (CLEAR_BIT((__HANDLE__)->Instance->CCR , (__INTERRUPT__))) + +/** + * @brief Check whether the specified DMA Channel interrupt is enabled or not. + * @param __HANDLE__: DMA handle + * @param __INTERRUPT__: specifies the DMA interrupt source to check. + * This parameter can be one of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @retval The state of DMA_IT (SET or RESET). + */ +#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CCR & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** + * @brief Return the number of remaining data units in the current DMA Channel transfer. + * @param __HANDLE__: DMA handle + * @retval The number of remaining data units in the current DMA Channel transfer. + */ +#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNDTR) + +/** + * @} + */ + +/* Include DMA HAL Extension module */ +#include "stm32f1xx_hal_dma_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup DMA_Exported_Functions + * @{ + */ + +/** @addtogroup DMA_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_DeInit (DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/** @addtogroup DMA_Exported_Functions_Group2 + * @{ + */ +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout); +void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)( DMA_HandleTypeDef * _hdma)); +HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID); + +/** + * @} + */ + +/** @addtogroup DMA_Exported_Functions_Group3 + * @{ + */ +/* Peripheral State and Error functions ***************************************/ +HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma); +uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup DMA_Private_Macros DMA Private Macros + * @{ + */ + +#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \ + ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \ + ((DIRECTION) == DMA_MEMORY_TO_MEMORY)) + +#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1U) && ((SIZE) < 0x10000U)) + +#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \ + ((STATE) == DMA_PINC_DISABLE)) + +#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \ + ((STATE) == DMA_MINC_DISABLE)) + +#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \ + ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \ + ((SIZE) == DMA_PDATAALIGN_WORD)) + +#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \ + ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \ + ((SIZE) == DMA_MDATAALIGN_WORD )) + +#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \ + ((MODE) == DMA_CIRCULAR)) + +#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \ + ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \ + ((PRIORITY) == DMA_PRIORITY_HIGH) || \ + ((PRIORITY) == DMA_PRIORITY_VERY_HIGH)) + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F1xx_HAL_DMA_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit v1.2.3-70-g09d2