From 2089f196707e3889f1920238e2f1bc09912a5492 Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Mon, 18 Sep 2017 21:11:11 -0400 Subject: toolhead: Separate is_active() code from stats() code Signed-off-by: Kevin O'Connor --- klippy/toolhead.py | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'klippy/toolhead.py') diff --git a/klippy/toolhead.py b/klippy/toolhead.py index 7611e0bf..c0889306 100644 --- a/klippy/toolhead.py +++ b/klippy/toolhead.py @@ -356,14 +356,15 @@ class ToolHead: self.move_queue.set_extruder(extruder) self.commanded_pos[3] = extrude_pos # Misc commands + def check_active(self, eventtime): + if not self.sync_print_time: + return True + return self.print_time + 60. > self.mcu.estimated_print_time(eventtime) def stats(self, eventtime): - buffer_time = 0. - print_time = self.print_time est_print_time = self.mcu.estimated_print_time(eventtime) - is_active = not self.sync_print_time or print_time + 60. > est_print_time - buffer_time = max(0., print_time - est_print_time) - return is_active, "print_time=%.3f buffer_time=%.3f print_stall=%d" % ( - print_time, buffer_time, self.print_stall) + buffer_time = max(0., self.print_time - est_print_time) + return "print_time=%.3f buffer_time=%.3f print_stall=%d" % ( + self.print_time, buffer_time, self.print_stall) def force_shutdown(self): try: self.mcu.force_shutdown() -- cgit v1.2.3-70-g09d2