From 5a5ecd88e22a25ef9ec5336f3d3220af042678be Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Sun, 25 Apr 2021 14:53:50 -0400 Subject: stepper: Do not set min_stop_interval in micro-controller The min_stop_interval safety check is fragile and leads to a notable amount of complexity. Avoid these issues by not programming this safety check. Signed-off-by: Kevin O'Connor --- klippy/kinematics/rotary_delta.py | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'klippy/kinematics/rotary_delta.py') diff --git a/klippy/kinematics/rotary_delta.py b/klippy/kinematics/rotary_delta.py index 9e57a11e..f61ed34a 100644 --- a/klippy/kinematics/rotary_delta.py +++ b/klippy/kinematics/rotary_delta.py @@ -23,13 +23,10 @@ class RotaryDeltaKinematics: self.rails = [rail_a, rail_b, rail_c] config.get_printer().register_event_handler("stepper_enable:motor_off", self._motor_off) - # Setup stepper max halt velocity + # Read config max_velocity, max_accel = toolhead.get_max_velocity() self.max_z_velocity = config.getfloat('max_z_velocity', max_velocity, above=0., maxval=max_velocity) - for rail in self.rails: - rail.set_max_jerk(9999999.9, 9999999.9) - # Read config shoulder_radius = config.getfloat('shoulder_radius', above=0.) shoulder_height = config.getfloat('shoulder_height', above=0.) a_upper_arm = stepper_configs[0].getfloat('upper_arm_length', above=0.) -- cgit v1.2.3-70-g09d2