From d2c2aaf55df955e1e0f727d22362d57b41e614f5 Mon Sep 17 00:00:00 2001 From: Kamil Trzcinski Date: Tue, 8 Jun 2021 10:39:55 +0000 Subject: extruder: expose `can_extrude` flag based on temperature Sometimes an automated filament load is implemented, but extruder might not always extrude filament. This adds a flag to check if this operation is possible. Signed-off-by: Kamil Trzcinski --- docs/Status_Reference.md | 2 ++ 1 file changed, 2 insertions(+) (limited to 'docs') diff --git a/docs/Status_Reference.md b/docs/Status_Reference.md index 17a759f5..81449a6a 100644 --- a/docs/Status_Reference.md +++ b/docs/Status_Reference.md @@ -144,6 +144,8 @@ The following information is available for heater objects such as the given heater. - `power`: The last setting of the PWM pin (a value between 0.0 and 1.0) associated with the heater. +- `can_extrude`: If extruder can extrude (defined by `min_extrude_temp`), + available only for [extruder](Config_Reference.md#extruder) # heaters -- cgit v1.2.3-70-g09d2