From c9e7119a933530c2989c94f7333bbea963a47fbd Mon Sep 17 00:00:00 2001
From: bondus <liquidpontus@yahoo.se>
Date: Fri, 7 Aug 2020 17:39:44 +0200
Subject: fan_generic: Add support for named fans and gcode to control them
 (#3054)

Signed-off-by: Pontus Borg <liquidpontus@yahoo.se>
---
 docs/G-Codes.md | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'docs')

diff --git a/docs/G-Codes.md b/docs/G-Codes.md
index 35523839..3b5db9ad 100644
--- a/docs/G-Codes.md
+++ b/docs/G-Codes.md
@@ -244,6 +244,13 @@ The following command is available when an "output_pin" config section
 is enabled:
 - `SET_PIN PIN=config_name VALUE=<value>`
 
+## Manually Controlled Fans Commands
+
+The following command is available when a "fan_generic" config section
+is enabled:
+- `SET_FAN_SPEED FAN=config_name SPEED=<speed>` This command sets
+  the speed of a fan. <speed> must be between 0.0 and 1.0.
+
 ## Neopixel and Dotstar Commands
 
 The following command is available when "neopixel" or "dotstar" config
-- 
cgit v1.2.3-70-g09d2