From b3298d8992bde9bd206c455212eb16d4403bd1d8 Mon Sep 17 00:00:00 2001
From: Denis Ignatenko <60291791+test3210-d@users.noreply.github.com>
Date: Tue, 16 Jun 2020 20:36:49 +0300
Subject: hall_filament_width_sensor: Added width logging (#2981)

Signed-off-by: Denis Ignatenko deniss979@gmail.com
---
 docs/HallFilamentWidthSensor.md | 12 ++++++++++++
 1 file changed, 12 insertions(+)

(limited to 'docs')

diff --git a/docs/HallFilamentWidthSensor.md b/docs/HallFilamentWidthSensor.md
index 5867662d..efb62128 100644
--- a/docs/HallFilamentWidthSensor.md
+++ b/docs/HallFilamentWidthSensor.md
@@ -48,6 +48,10 @@ Sensor generates two analog output based on calculated filament width. Sum of ou
     # measurement_interval:10
     # Sensor readings done with 10 mm intervals by default. If necessary you are free to change this setting
 
+    #logging: False
+    #  Out diameter to terminal and klipper.log
+    #  can be turn on|of by command
+
     #Virtual filament_switch_sensor suppurt. Create sensor named hall_filament_width_sensor.
     #
     #min_diameter:1.0
@@ -75,6 +79,10 @@ Sensor generates two analog output based on calculated filament width. Sum of ou
 
 **QUERY_RAW_FILAMENT_WIDTH** Return the current ADC channel values and RAW sensor value for calibration points
 
+**ENABLE_FILAMENT_WIDTH_LOG** - Turn on diameter logging
+
+**DISABLE_FILAMENT_WIDTH_LOG** - Turn off diameter logging
+
 ## Menu variables
 
 **hall_filament_width_sensor.Diameter** current measured filament width in mm
@@ -117,3 +125,7 @@ Save raw values in config
 ## How to enable sensor
 After power on by default sensor disabled.
 Enable sensor in start g-code by command **ENABLE_FILAMENT_WIDTH_SENSOR** or change enable parameter in config
+
+## Logging
+After power on by default diameter Logging disabled.
+Data to log added on every measurement interval (10 mm by default)
-- 
cgit v1.2.3-70-g09d2