From 68fcbe2a62c2ed8ddb97b3935ab89bb65e7e8f8c Mon Sep 17 00:00:00 2001 From: Florian Heilmann Date: Tue, 9 Jun 2020 18:07:25 +0200 Subject: display: add SET_DISPLAY_GROUP command (#2969) Signed-off-by: Florian Heilmann --- docs/G-Codes.md | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'docs') diff --git a/docs/G-Codes.md b/docs/G-Codes.md index 286dce36..48ece06d 100644 --- a/docs/G-Codes.md +++ b/docs/G-Codes.md @@ -202,6 +202,11 @@ The following standard commands are supported: adjustment will only be made every BAND millimeters of z height - in that case the formula used is `value = start + factor * ((floor(z_height / band) + .5) * band)`. +- `SET_DISPLAY_GROUP DISPLAY= GROUP=`: Set the active + display group of the display. This allows to define multiple display + data groups in the config, e.g.`[display_data ]` + and switch between them using this extended gcode command. use + `DISPLAY=display` to change the display group of the default display. - `SET_IDLE_TIMEOUT [TIMEOUT=]`: Allows the user to set the idle timeout (in seconds). - `RESTART`: This will cause the host software to reload its config -- cgit v1.2.3-70-g09d2