From 8bc9f39c58d4416faa53323fad2bece4a14847a0 Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Sun, 14 Apr 2019 21:12:21 -0400 Subject: docs: Avoid using .. in markdown links Using .. in the markdown link can confuse some document processors. Use an absolute link to github instead. Signed-off-by: Kevin O'Connor --- docs/Slicers.md | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'docs/Slicers.md') diff --git a/docs/Slicers.md b/docs/Slicers.md index 25c45d05..0e849ffa 100644 --- a/docs/Slicers.md +++ b/docs/Slicers.md @@ -18,8 +18,9 @@ END_PRINT in the slicer's configuration. Defining these actions in the Klipper configuration may make it easier to tweak the printer's start and end steps as changes do not require re-slicing. -See the [example-extras.cfg](../config/example-extras.cfg) file for -details on defining a gcode_macro. +See the +[example-extras.cfg](https://github.com/KevinOConnor/klipper/tree/master/config/example-extras.cfg) +file for details on defining a gcode_macro. # Large retraction settings may require tuning Klipper -- cgit v1.2.3-70-g09d2