From 057acb07b7825b4175ae7159ec9358b80a8b1354 Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Sun, 28 Oct 2018 10:24:34 -0400 Subject: docs: Add a Slicers.md document Add some information on configuring a slicer for use with Klipper. Signed-off-by: Kevin O'Connor --- docs/Overview.md | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'docs/Overview.md') diff --git a/docs/Overview.md b/docs/Overview.md index 1ad046c3..a781344d 100644 --- a/docs/Overview.md +++ b/docs/Overview.md @@ -10,7 +10,8 @@ settings in the config file. The Klipper configuration is stored in a simple text file on the host machine. The [config/example.cfg](../config/example.cfg) file serves -as a reference for the config file. See the +as a reference for the config file. See the [Slicers](Slicers.md) +document for information on configuring a slicer with Klipper. See the [Endstop Phase](Endstop_Phase.md) document for information on Klipper's "stepper phase adjusted endstop" system. See the [Delta Calibrate](Delta_Calibrate.md) document for information on -- cgit v1.2.3-70-g09d2