From ee04a6340a028b84ea5cc1db278b38869ab4b9c7 Mon Sep 17 00:00:00 2001 From: Yifei Ding Date: Sat, 23 Oct 2021 11:21:46 -0700 Subject: docs: Align Lists Signed-off-by: Yifei Ding --- docs/Manual_Level.md | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'docs/Manual_Level.md') diff --git a/docs/Manual_Level.md b/docs/Manual_Level.md index ada31b4d..6a49d499 100644 --- a/docs/Manual_Level.md +++ b/docs/Manual_Level.md @@ -181,10 +181,10 @@ Recv: ok ``` This means that: - - front left screw is the reference point you must not change it. - - front right screw must be turned clockwise 1 full turn and a quarter turn - - rear right screw must be turned counter-clockwise 50 minutes - - read left screw must be turned clockwise 2 minutes (not need it's ok) +- front left screw is the reference point you must not change it. +- front right screw must be turned clockwise 1 full turn and a quarter turn +- rear right screw must be turned counter-clockwise 50 minutes +- read left screw must be turned clockwise 2 minutes (not need it's ok) Repeat the process several times until you get a good level bed - normally when all adjustments are below 6 minutes. -- cgit v1.2.3-70-g09d2