From 8bc9f39c58d4416faa53323fad2bece4a14847a0 Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Sun, 14 Apr 2019 21:12:21 -0400 Subject: docs: Avoid using .. in markdown links Using .. in the markdown link can confuse some document processors. Use an absolute link to github instead. Signed-off-by: Kevin O'Connor --- docs/Installation.md | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'docs/Installation.md') diff --git a/docs/Installation.md b/docs/Installation.md index d277aa3c..ea2746f1 100644 --- a/docs/Installation.md +++ b/docs/Installation.md @@ -127,11 +127,11 @@ Configuring Klipper The Klipper configuration is stored in a text file on the Raspberry Pi. Take a look at the example config files in the -[config directory](../config/). The -[example.cfg](../config/example.cfg) file contains documentation on -command parameters and it can also be used as an initial config file -template. However, for most printers, one of the other config files -may be a more concise starting point. +[config directory](https://github.com/KevinOConnor/klipper/tree/master/config/). The +[example.cfg](https://github.com/KevinOConnor/klipper/tree/master/config/example.cfg) +file contains documentation on command parameters and it can also be +used as an initial config file template. However, for most printers, +one of the other config files may be a more concise starting point. Arguably the easiest way to update the Klipper configuration file is to use a desktop editor that supports editing files over the "scp" -- cgit v1.2.3-70-g09d2