From 893cbbab83ebd4906eab0ce9bb08d0fb4f805af7 Mon Sep 17 00:00:00 2001 From: Arksine Date: Mon, 21 Jan 2019 17:24:17 -0500 Subject: pause_resume: update documentation Add updates to example-extras.cfg and G-Codes.md documenting pause_resume. Also add M600 (filament change) to sample-macros.cfg. Signed-off-by: Eric Callahan --- docs/G-Codes.md | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'docs/G-Codes.md') diff --git a/docs/G-Codes.md b/docs/G-Codes.md index d7fcbedb..6848279f 100644 --- a/docs/G-Codes.md +++ b/docs/G-Codes.md @@ -291,3 +291,13 @@ enabled. - `RESPOND TYPE=error MSG=""`: echo the message prepended with `!! `. - `RESPOND PREFIX= MSG=""`: echo the message prepended with `` (The `PREFIX` parameter will take priority over the `TYPE` parameter) + +## Pause Resume + +The following commands are available when the "pause_resume" config section +is enabled: + - `PAUSE`: Pauses the current print. The current position is captured for + restoration upon resume. + - `RESUME [VELOCITY=]`: Resumes the print from a pause, first restoring + the previously captured position. The VELOCITY parameter determines the speed + at which the tool should return to the original captured position. -- cgit v1.2.3-70-g09d2