From 3665e9fc53682ea3cddf49c24e10974c78f2d28c Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Thu, 7 Nov 2019 16:50:52 -0500 Subject: docs: Recommend safe_z_home over homing_override Update BLTouch.md, FAQ.md, and sample-probe-as-z-endstop.cfg to recommend using a safe_z_home config section over a homing_override config section. Signed-off-by: Kevin O'Connor --- docs/FAQ.md | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'docs/FAQ.md') diff --git a/docs/FAQ.md b/docs/FAQ.md index 56490520..e3e3b163 100644 --- a/docs/FAQ.md +++ b/docs/FAQ.md @@ -211,9 +211,10 @@ the desired movement to the "custom g-code" section of your slicer. If the printer requires some additional movement as part of the homing process itself (or fundamentally does not have a homing process) then -consider using a homing_override section in the config file. If you -need to move a stepper for diagnostic or debugging purposes then -consider adding a force_move section to the config file. See +consider using a safe_z_home or homing_override section in the config +file. If you need to move a stepper for diagnostic or debugging +purposes then consider adding a force_move section to the config +file. See [example-extras.cfg](https://github.com/KevinOConnor/klipper/tree/master/config/example-extras.cfg) for further details on these options. -- cgit v1.2.3-70-g09d2