From 0025fbf10d81555b0c417941d70650d7c625045c Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Sun, 8 Jul 2018 14:08:21 -0400 Subject: toolhead: Replace junction_deviation with square_corner_velocity The junction_deviation configuration parameter has a number of quirks that make it difficult to configure. Replace it with a "square_corner_velocity" configuration parameter. Signed-off-by: Kevin O'Connor --- docs/FAQ.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'docs/FAQ.md') diff --git a/docs/FAQ.md b/docs/FAQ.md index d2fc3ccd..8a67dcf2 100644 --- a/docs/FAQ.md +++ b/docs/FAQ.md @@ -220,7 +220,7 @@ TMC driver. Trinamic has indicated that this could occur if the driver is in "stealthChop mode" and an abrupt velocity change occurs. If you experience this problem during homing, consider using a slower homing speed. If you experience this problem in the middle of a print, -consider using a lower junction_deviation setting. +consider using a lower square_corner_velocity setting. ### When I set "restart_method=command" my AVR device just hangs on a restart -- cgit v1.2.3-70-g09d2