From 530a37196c447edf1ba619e4c95761dbd56cb582 Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Thu, 18 Oct 2018 09:44:30 -0400 Subject: docs: Update LPC176x benchmarks Signed-off-by: Kevin O'Connor --- docs/Debugging.md | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'docs/Debugging.md') diff --git a/docs/Debugging.md b/docs/Debugging.md index 66c16bd3..59f8d065 100755 --- a/docs/Debugging.md +++ b/docs/Debugging.md @@ -347,14 +347,14 @@ config_stepper oid=2 step_pin=P1.23 dir_pin=P1.18 min_stop_interval=0 invert_ste finalize_config crc=0 ``` -The test was last run on commit `c78b9076` with gcc version +The test was last run on commit `8fca9084` with gcc version `arm-none-eabi-gcc (Fedora 7.1.0-5.fc27) 7.1.0`. For the 100Mhz -LPC1768, the best single stepper result is `SET ticks 136`, the best -dual stepper result is `SET ticks 134`, and the best three stepper -result is `SET ticks 195`. The 120Mhz LPC1769 results were obtained by +LPC1768, the best single stepper result is `SET ticks 128`, the best +dual stepper result is `SET ticks 118`, and the best three stepper +result is `SET ticks 154`. The 120Mhz LPC1769 results were obtained by overclocking an LPC1768 to 120Mhz - the best single stepper result is -`SET ticks 155`, the best dual stepper result is `SET ticks 148`, and -the best three stepper result is `SET ticks 195`. +`SET ticks 148`, the best dual stepper result is `SET ticks 137`, and +the best three stepper result is `SET ticks 154`. ### SAMD21 step rate benchmark ### -- cgit v1.2.3-70-g09d2