From c3ec4af6cc3a62353e1eed57e0514356eeef1fb6 Mon Sep 17 00:00:00 2001 From: "林玮 (Jade Lin)" Date: Thu, 25 Apr 2024 09:45:05 +0800 Subject: bme280: Add BMP388 sensor support to BMxx80 (#6576) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Extends the BMxx80 category with support for the BMP388 sensor, providing temperature and pressure output similar to the existing BMxx80 class of sensors. Signed-off-by: 林玮 (Jade Lin) --- docs/Config_Reference.md | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'docs/Config_Reference.md') diff --git a/docs/Config_Reference.md b/docs/Config_Reference.md index 71cdfed8..b6614055 100644 --- a/docs/Config_Reference.md +++ b/docs/Config_Reference.md @@ -2490,9 +2490,9 @@ sensor_pin: # name in the above list. ``` -### BMP180/BMP280/BME280/BME680 temperature sensor +### BMP180/BMP280/BME280/BMP388/BME680 temperature sensor -BMP180/BMP280/BME280/BME680 two wire interface (I2C) environmental sensors. +BMP180/BMP280/BME280/BMP388/BME680 two wire interface (I2C) environmental sensors. Note that these sensors are not intended for use with extruders and heater beds, but rather for monitoring ambient temperature (C), pressure (hPa), relative humidity and in case of the BME680 gas level. @@ -2503,8 +2503,8 @@ temperature. ``` sensor_type: BME280 #i2c_address: -# Default is 118 (0x76). The BMP180 and some BME280 sensors have an address of 119 -# (0x77). +# Default is 118 (0x76). The BMP180, BMP388 and some BME280 sensors +# have an address of 119 (0x77). #i2c_mcu: #i2c_bus: #i2c_software_scl_pin: -- cgit v1.2.3-70-g09d2