From b911db4c0de10245fd008a6a236d6af23b93e8fe Mon Sep 17 00:00:00 2001 From: Al Date: Thu, 3 Dec 2020 17:35:37 +0000 Subject: rpi_temperature: New module to monitor RPi temperature (#3587) Module to monitor RPi cpu temperature Signed-off-by: Al Crate --- docs/Config_Reference.md | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'docs/Config_Reference.md') diff --git a/docs/Config_Reference.md b/docs/Config_Reference.md index 5b0a8b54..cb9e3a6e 100644 --- a/docs/Config_Reference.md +++ b/docs/Config_Reference.md @@ -2058,6 +2058,27 @@ but this mode is not used here. # 0.5. ``` +## RPi temperature sensor + +CPU temperature from Raspberry Pi. + +``` +#[temperature_sensor my_sensor] +# See the "temperature_sensor" section for a description of its +# parameters. The parameters below describe the Raspberry Pi sensor +# parameters. +#sensor_type: +# Must be "rpi_temperature". +min_temp: -40 +max_temp: 85 +# The maximum safe range of temperatures (in Celsius) that the +# RPi must remain within. This controls a safety feature +# implemented in the micro-controller code - should the measured +# temperature ever fall outside this range then the micro-controller +# will go into a shutdown state. Set this range just wide +# enough so that reasonable temperatures do not result in an error. +``` + ## [heater_generic] Generic heaters (one may define any number of sections with a -- cgit v1.2.3-70-g09d2