From 8fe18f27a94df0a9d394824a3e648ee7f8fc280a Mon Sep 17 00:00:00 2001 From: Eric Callahan Date: Sat, 29 Apr 2023 16:39:42 -0400 Subject: docs: update Bed Mesh documentation Signed-off-by: Eric Callahan --- docs/Config_Reference.md | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) (limited to 'docs/Config_Reference.md') diff --git a/docs/Config_Reference.md b/docs/Config_Reference.md index 1cc0bc8f..fa770408 100644 --- a/docs/Config_Reference.md +++ b/docs/Config_Reference.md @@ -966,10 +966,18 @@ Visual Examples: # be applied to change the amount of slope interpolated. Larger # numbers will increase the amount of slope, which results in more # curvature in the mesh. Default is .2. +#zero_reference_position: +# An optional X,Y coordinate that specifies the location on the bed +# where Z = 0. When this option is specified the mesh will be offset +# so that zero Z adjustment occurs at this location. The default is +# no zero reference. #relative_reference_index: -# A point index in the mesh to reference all z values to. Enabling -# this parameter produces a mesh relative to the probed z position -# at the provided index. +# **DEPRECATED, use the "zero_reference_position" option** +# The legacy option superceded by the "zero reference position". +# Rather than a coordinate this option takes an integer "index" that +# refers to the location of one of the generated points. It is recommended +# to use the "zero_reference_position" instead of this option for new +# configurations. The default is no relative reference index. #faulty_region_1_min: #faulty_region_1_max: # Optional points that define a faulty region. See docs/Bed_Mesh.md -- cgit v1.2.3-70-g09d2