From 88f6061cd7232e883848e78d8b3cf5a2488babef Mon Sep 17 00:00:00 2001 From: Pascal P <7480344+Cirromulus@users.noreply.github.com> Date: Fri, 26 Mar 2021 16:25:09 +0100 Subject: output_pin: Support setting max_duration (#3995) Also added documentation for using powered tools. Signed-off-by: Pascal Pieper --- docs/Config_Reference.md | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'docs/Config_Reference.md') diff --git a/docs/Config_Reference.md b/docs/Config_Reference.md index 1c86acf5..cca85161 100644 --- a/docs/Config_Reference.md +++ b/docs/Config_Reference.md @@ -2529,6 +2529,13 @@ pin: #shutdown_value: # The value to set the pin to on an MCU shutdown event. The default # is 0 (for low voltage). +#maximum_mcu_duration: +# The maximum duration a non-shutdown value may be driven by the MCU +# without an acknowledge from the host. +# If host can not keep up with an update, the MCU will shutdown +# and set all pins to their respective shutdown values. +# Default: 0 (disabled) +# Usual values are around 5 seconds. #cycle_time: 0.100 # The amount of time (in seconds) per PWM cycle. It is recommended # this be 10 milliseconds or greater when using software based PWM. -- cgit v1.2.3-70-g09d2