From 4a41d228eb8e486919587c9f7e4f79c934572529 Mon Sep 17 00:00:00 2001 From: Dmitry Butyugin Date: Thu, 17 Dec 2020 23:44:46 +0100 Subject: docs: Input Shaper and Resonances docs improvements (#3627) Signed-off-by: Dmitry Butyugin --- docs/Config_Reference.md | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'docs/Config_Reference.md') diff --git a/docs/Config_Reference.md b/docs/Config_Reference.md index 3c1f4017..ac4424ec 100644 --- a/docs/Config_Reference.md +++ b/docs/Config_Reference.md @@ -1348,9 +1348,9 @@ the [command reference](G-Codes.md#resonance-compensation). #damping_ratio_x: 0.1 #damping_ratio_y: 0.1 # Damping ratios of vibrations of X and Y axes used by input shapers -# to improve vibration suppression. Should not be changed without -# some proper measurements, e.g. with an accelerometer. Default -# value is 0.1 which is a good all-round value for most printers. +# to improve vibration suppression. Default value is 0.1 which is a +# good all-round value for most printers. In most circumstances this +# parameter requires no tuning and should not be changed. ``` ## [adxl345] -- cgit v1.2.3-70-g09d2