From 354b1e666b92d1b51bf19b3d834848d6ce1639df Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Mon, 14 Jul 2025 12:58:38 -0400 Subject: pca9632: Remove custom software i2c - use normal mcu software i2c instead Signed-off-by: Kevin O'Connor --- docs/Config_Reference.md | 5 ----- 1 file changed, 5 deletions(-) (limited to 'docs/Config_Reference.md') diff --git a/docs/Config_Reference.md b/docs/Config_Reference.md index d9125d47..bc99bd94 100644 --- a/docs/Config_Reference.md +++ b/docs/Config_Reference.md @@ -3477,11 +3477,6 @@ PCA9632 LED support. The PCA9632 is used on the FlashForge Dreamer. #i2c_speed: # See the "common I2C settings" section for a description of the # above parameters. -#scl_pin: -#sda_pin: -# Alternatively, if the pca9632 is not connected to a hardware I2C -# bus, then one may specify the "clock" (scl_pin) and "data" -# (sda_pin) pins. The default is to use hardware I2C. #color_order: RGBW # Set the pixel order of the LED (using a string containing the # letters R, G, B, W). The default is RGBW. -- cgit v1.2.3-70-g09d2